Electrical Engineer Services in  Albany Oregon

Engineering Firms Near Me_

Everybody from Arizona to New Hampshire, are aware that for responsive MEP engineering service in Albany Oregon – MEP.NY-Engineers.Com is the best option. What quite a few local everyone do not know is that NY-Engineers.Com is also the ideal choice for anyone searching for Electrical Engineering Service in or near Albany Oregon. Just so that you know that New York Engineers if a full-service national engineering agency offering Energy Modeling, Utility Filings, Engineering Reports, Building Commissioning, CAD to Revit Modeling, Mechanical Engineering Services, Electrical Engineering Services, Plumbing Engineering Services, Sprinkler Engineering Services, MEP Engineer, Mechanical Engineering, Electrical Engineering, Plumbing Engineering, Sprinkler Engineering, Fire Protection Engineering, Construction Administration, Value Engineering, Building Commissioning Engineering Services, CAD to Revit Modeling Engineering Services, Fire Protection Engineering Services, Construction Administration Engineering Services, Value Engineering Services, Energy Modeling Engineering Services, Utility Filings Engineering Services, Engineering Reports Services, and more. About our Electrical Engineering Service in or near Albany Oregon. As a full-service firm we can help you with just about anything you can bring to us. Nevertheless, out top requested jobs include but are not limited to Electrical Lighting Designs, Mechanical Power Designs, Electrical Riser Diagrams, Panel Board Schedules, New Building Electrical Design, Renovation Electrical Design, Preparation of Electric Load Letters, Emergency Generator Systems, Sub-Metering or Direct Metering, Switchgear, Main or Sub Distribution Panel, and Branch Wiring Design.

What do electrical engineers do? If you are considering hiring an electrical engineer for a job, you are likely to need to make sure you choose someone that comes strongly recommended, and should also want to search for somebody who is totally qualified. Together with that, you would like to learn a little more as to what an electrical engineer actually does. Here’s how you can learn more about this profession.

Speak With People That Have Hired Engineers In The Past – One of the better ways to find out what it might be like to use an electrical engineer is to talk with some of your colleagues which may have hired one in past times. Whether or not they had the engineer develop an electrical system on their behalf or hired these people to test their existing equipment, you will have the capacity to learn considerably off their experiences.

Interview Some Candidates – Not every engineer has got the same set of skills. Before you hire anyone, you will want to spend some time interviewing your top choices. Throughout this interview, you will get the chance to go over their past work with them. You can find out in case they have relevant expertise.

Pay Attention To Any Project – Before deciding whether you should hire one of these brilliant engineers, you must evaluate the project that you’d be hiring them for. Think about the work you would need them to do. Spend some time to consider what an engineer could do to suit your needs, and explore several of your other options at the same time.

Electrical engineers are equipped for all sorts of electrical work. You ought to take a good look at what these professionals do so that you can check if they might be able to aid you with your preferences. You could benefit greatly should you hire a highly skilled engineer to help you. As you can see we are not just your local Electrical Engineering Service in or near Albany Oregon. We can help you with everything from Energy Modeling, Utility Filings, Engineering Reports, Building Commissioning, CAD to Revit Modeling, Mechanical Engineering Services, Electrical Engineering Services, Plumbing Engineering Services, Sprinkler Engineering Services, MEP Engineer, Mechanical Engineering, Electrical Engineering, to Plumbing Engineering, Sprinkler Engineering, Fire Protection Engineering, Construction Administration, Value Engineering, Building Commissioning Engineering Services, CAD to Revit Modeling Engineering Services, Fire Protection Engineering Services, Construction Administration Engineering Services, Value Engineering Services, Energy Modeling Engineering Services, Utility Filings Engineering Services, Engineering Reports Services and more. For additional info on everything we do at MEP.NY-Engineers.Com take a look at our Utility Filings blog.

New Blog Article Related to Electrical Engineer Services in Albany Oregon

A Plumbing Engineering Expert Explains Storage and Demand-Type Water Heaters

Construction Engineering Courses

Water heaters are household appliances that normally use natural gas or electricity to produce heat, and often include a tank to store hot water. These plumbing engineering systems provide a very important service for modern society, especially in locations with cold winters. Water heaters represent a significant portion of building energy expenses, so an optimal design is very important to achieve low-cost operation.

The following summarizes the main types of water heaters:

Traditional tank-type water heaters work with either gas or electricity. They offer a large volume of hot water that can be dispersed throughout your entire home, and typically keep the stored water at a temperature near 120°F at all times. Oil-fired models are also available but have a higher running cost than gas heaters and pollute more than other plumbing engineering solutions for water heaters.

Heat pumps also use a storage tank but differ from conventional electric heaters in the method used to raise water temperature. While conventional heaters apply voltage to an electric resistance, heat pumps are like a refrigerator operating in reverse: they cool the surrounding air to heat the water inside.

Tankless or demand-type water heaters do not store hot water, but rather heat it quickly on demand. These are also available in both gas-fired and electric versions.

How to Select a Water Heater

The selection process for a water heater depends on the specific subtype. For example, tankless heaters must be sized to provide rapid heating in short bursts, while storage heaters can provide a steadier and less intense heat output. Regardless of the type of heater chosen, consider that saving water also saves energy, since there are less gallons to heat per day.

1)   Tankless or Demand-Type Water Heater

The first step is to identify the required flowrate in gallons per minute (GPM). To provide an example, consider the following figures from 2010 plumbing standards:

  • Bath lavatory sink = 0.5 GPM
  • Standard shower = 2 to 2.5 GPM
  • Total demand = 3 GPM.

The next step is to determine the temperature rise needed, from the difference between the required water temperature and the incoming water temperature. In this example, if the required temperature is 110°F and the incoming temperature is 57°F, the temperature rise is:

  • Temperature rise = 110°F – 57°F = 53°F

In this application, it would be necessary to select a water heater that runs at 3 GPM with a 53°F heat rise. This is very different from conserving water at 110°F inside a tank, since the demand-type heater must achieve the full temperature rise the moment water flows through.

2) Storage-Type Water Heater

The design approach here is different, since this type of heater keeps a reservoir for when hot water is needed. Hot water demand is typically analyzed in gallons per hour (GPH) instead of gallons per minute (GPM). Normally, GPH values come from local plumbing codes, while demand factors and storage factors for commercial and residential occupancies are mentioned in ASHRAE Codes.

Consider the following example:

  • Hot water demand = 492 GPH
  • Demand factor = 0.3 (for private residences per ASHRAE)
  • Storage factor = 0.7 (for private residences per ASHRAE)
  • Temperature rise (ΔT) = 100°F

The first step is to determine the required recovery rate, which describes how many gallons of water must be handled by the heater per hour. This value is obtained by multiplying the total hot water demand and the demand factor:

  • Recovery rate = 492 GPH x 0.3 = 147.6 GPH

The actual heat input is calculated as follows:

  • Heat input (BTU/H) = Recovery Rate (GPH) x ΔT (°F) x Specific Heat (BTU/gal °F)
  • Heat input (BTU/H) = 147.6 GPH x 100°F x 8.33 BTU/gal °F = 122,950.8 BTU/H
  • Heat input (BTU/H) = 123 MBTU/H (thousand BTU per hour)

The required capacity of the tank is determined by the storage factor:

  • Tank capacity = Recovery Rate x Storage Factor
  • Tank capacity (gal) = 147.6 GPH x 0.7 = 103 gal

In this application, the water heater must have a capacity of 123 MBTU/H at 100°F temperature rise and a recovery rate of 147.6 GPH.

Advantages and Disadvantages of Each Heater Type in Plumbing Engineering

Like with any engineering decision, water heaters come with distinct advantages and disadvantages. This section summarizes the strong points of each technology, as well as the limitations.

Storage-type Water Heater

Advantages:

  • Lower initial cost – A traditional water heater can cost half as much as a tankless water heater.
  • Easy and inexpensive to replace – A simpler installation means there’s less that can go wrong. Maintenance and reparations have a lower cost.

Disadvantages:

  • Higher utility bill – Water is heated and reheated at a preset temperature regardless of your hot water needs. This increases your utility bill, especially during the winter.
  • Space requirements – They occupy more room and can’t be placed outside.
  • Can run out of hot water – Ever been the last in your family to get the shower? It’s a chilling experience. This problem can be avoided by purchasing a larger tank, but this also leads to more energy costs because a larger volume of water must be kept hot.
  • Shorter service life – This type of heater lasts 10-15 years. As a result you have to buy them twice as often as tankless water heaters.

Tankless Water Heater

Advantages:

  • Saves money in the long run – For homes that use below 41 gallons of hot water per day, demand-type water heaters can be 24–34% more energy efficient than conventional storage heaters.
  • Compact and versatile – They are small and can be installed in more places compared with storage heaters, even outside a wall.
  • Longer service life – Last 20 years or more, almost doubling a traditional water heater’s service life.
  • Deliver hot water on demand – Tankless heaters provide two to three gallons of hot water per minute on demand. This can up to 5 GPM with gas-fired heaters.

Disadvantages:

  • Higher initial cost – Cost between $2800 to $4500 installed, depending on the model and supplier.
  • Retrofitting adds to upfront cost – Replacing a traditional water heater with a tankless system is more complicated, since the capacity of the electric or gas service entrance must be increased in most cases.

Which Are The Best Applications for Each Type of Heater?

Storage-type water heaters tend to work best when demand for hot water is constant and fluctuating, where low-demand periods can be used to replenish the tank. Some examples of suitable applications are restaurants, commercial areas, residential apartments and hotels.

Tankless water heaters are better suited for applications where the demand of hot water is well-known and occurs occasionally in short bursts. Some suitable applications are remote bathrooms and hot tubs. These heaters are also useful as boosters for dishwashers, clothes washers and other similar appliances. They can also complement solar water heaters that are unable to meet hot water demand by themselves.

If you are considering a new domestic hot water system, the best recommendation is to get professional assistance. A plumbing engineering professional will help ensure the DHW system will be adequate for the needs of your building.

Value Engineering Ppt

Electrical Engineer Service Albany Oregon

Electrical Engineer Services in  Albany Oregon From Maine to New Mexico real estate developers have come to rely on MEP.NY-Engineers.Com when they need expert MEP Engineers near Albany Oregon. Nevertheless, it is adequate to note that New York Engineers is more than that! We are eight national engineering company offering not only design but also advisory services. Although we are focused on mechanical, electrical and plumbing (MEP) installations. New York Engineers offers [...]

2019-02-19T22:08:02+00:00

MEP Engineer Service in Albany Oregon

MEP Engineer Service Albany Oregon Many top general contractors throughout New York know that NY Engineers is one of the top firms if you are searching for Utility Filings. With that said, due to the firms continuous growth many contractors have failed to realize that New York Engineers is perhaps top choice if you're searching for MEP Engineer in or near Albany Oregon. MEP is short for mechanical, electrical, and plumbing. Specifically, [...]

2019-02-02T10:58:41+00:00