Electrical Engineer Services in  Atlanta Georgia

HVAC Engineering Companies

Building owners from Indiana to Northern Mariana Islands, know that for affordable MEP engineering service in Atlanta Georgia – NY-Engineers.Com is the best choice. What a lot local builders don’t know is that MEP.NY-Engineers.Com is also the ideal partners for anybody looking for Electrical Engineer in Atlanta Georgia. For the record NY-Engineers.Com if a full-service engineering agency offering MEP Engineer, Mechanical Engineering, Electrical Engineering, Plumbing Engineering, Sprinkler Engineering, Fire Protection Engineering, Construction Administration, Value Engineering, Energy Modeling, Utility Filings, Engineering Reports, Building Commissioning, CAD to Revit Modeling, Mechanical Engineering Services, Electrical Engineering Services, Plumbing Engineering Services, Sprinkler Engineering Services, Fire Protection Engineering Services, Construction Administration Engineering Services, Value Engineering Services, Energy Modeling Engineering Services, Utility Filings Engineering Services, Engineering Reports Services, Building Commissioning Engineering Services, CAD to Revit Modeling Engineering Services, and more. About our Electrical Engineering Service in or near Atlanta Georgia. As a full-service firm we can help you with just about anything you can bring to us. With that said, out most popular projects include but are not limited to Electrical Lighting Designs, Mechanical Power Designs, Electrical Riser Diagrams, Panel Board Schedules, New Building Electrical Design, Renovation Electrical Design, Preparation of Electric Load Letters, Emergency Generator Systems, Sub-Metering or Direct Metering, Switchgear, Main or Sub Distribution Panel, and Branch Wiring Design.

So, what do electrical engineers do? If you’re considering hiring an electric engineer for any job, you are going to want to actually choose someone that comes highly recommended, and you will also want to search for somebody that is fully qualified. Together with that, you want to find out a little bit more regarding what an electrical engineer actually does. This is how discover more concerning this profession.

Speak With People Who Have Hired Engineers Before – One of the better ways to find out what it could be like to work alongside an electric engineer is to talk with a few of your colleagues which have hired one in the past. Whether or not they had the engineer develop a power system on their behalf or hired them to test their existing equipment, you will be capable of learn quite a bit from the experiences.

Interview Some Candidates – Not every engineer has the same group of skills. Prior to hiring anyone, you will want to spend time interviewing your top choices. Within this interview, you will get the chance to look over their past assist them. You can find out should they have relevant expertise.

Look Closely At Any Project – Before deciding whether you need to hire one of those engineers, you ought to evaluate the project that you’d be hiring them for. Think about the work you might need these to do. Spend some time to consider what an engineer could do for you, and explore a number of your other options also.

Electrical engineers are equipped for all kinds of electrical work. You ought to take a close look at what these professionals do to help you check if they might be able to aid you with your expections. You could benefit greatly if you hire a skilled engineer to be of assistance. As you can see New York Engineers is not just an Electrical Engineer in or near Atlanta Georgia. We can help your project with everything from Electrical Engineering Services, Plumbing Engineering Services, Sprinkler Engineering Services, Fire Protection Engineering Services, Construction Administration Engineering Services, Value Engineering Services, Energy Modeling Engineering Services, Utility Filings Engineering Services, Engineering Reports Services, Building Commissioning Engineering Services, to CAD to Revit Modeling Engineering Services, MEP Engineer, Mechanical Engineering, Electrical Engineering, Plumbing Engineering, Sprinkler Engineering, Fire Protection Engineering, Construction Administration, Value Engineering, Energy Modeling, Utility Filings, Engineering Reports, Building Commissioning, CAD to Revit Modeling, Mechanical Engineering Services and more. For more info on everything we do at NY Engineers take a look at our blog.

Popular Blog Related to Electrical Engineer Services in Atlanta Georgia

Mechanical Engineers Design HVAC Systems for Sensitive Environments

Value Engineering Examples In Construction

A well-designed HVAC system keeps temperature and moisture within a range that is considered comfortable for humans, while constantly renewing the air in a building and filtering out pollutants. Mechanical engineers are, in large part, responsible for ensuring that an HVAC system is operating as it should. The system must also provide an adequate airflow, since stagnant air and draftiness are both detrimental for performance.

In most residential and commercial settings, deviations from the ideal operating conditions are allowable if they are transitory, and there is generally a broad range of acceptable temperature and humidity values. However, there are sensitive environments such as healthcare facilities, where optimal conditions must be kept at all times. Many HVAC systems in less demanding environments are controlled based on temperature only, and humidity is controlled indirectly. However, sensitive environments require that each variable be monitored and controlled independently, and specialized high-performance filters may be required by codes.

Humidity Control in Sensitive Environments

Precise humidity control is typically required for environments with sensitive electronic equipment, healthcare facilities and other similar locations were human life or important systems are at stake. For example, the relative humidity levels for healthcare typically range from 40 to 60 percent:

  • Bacteria and viruses thrive with both low and high humidity levels.
  • Patients who suffer from asthma or allergic rhinitis also experience symptoms in response to humidity extremes.
  • Dry air absorbs moisture from mucous membranes, reducing the body’s ability to fight off infections.
  • Low humidity also increases static electricity accumulation, and discharges can damage modern medical equipment, which is important for medical procedures and generally expensive
  • Dust has a higher tendency to become airborne at low humidity levels, further increasing the chance of triggering allergic reactions.
  • High humidity creates the ideal conditions for mold and dust mites.

Depending on weather conditions, an HVAC system may be required to operate in humidification or drying mode at different times of the year. Some areas of a sensitive environment may have more stringent requirements than others; surgery rooms in hospitals are an example of this. It is the responsibility of qualified mechanical engineers to understand what is needed across various projects.

Air Dehumidification

There are two main approaches for controlling air humidity independently: the HVAC system can use cooling and heating coils in series, or a desiccant wheel can be deployed.

  • Cooling and heating coils: With this approach, air is cooled and dehumidified by the cooling coil until the desired relative humidity is reached. Since this normally results in overcooling, air then flows through a heating coil to raise its temperature back to an acceptable level. This way, both temperature and humidity requirements are met.
  • Desiccant wheel: This device captures air humidity downstream from the cooling coil, and releases it upstream for it to be condensed and gathered. At design conditions, this system does not require any heating input, although a preheating coil is added in case extra dehumidification is required.

Desiccant wheels typically save energy because they eliminate the need for overcooling and reheating. There may be exceptions, however, so it is important to assess each installation independently.

Air Humidification

Healthcare humidification systems are often based on steam, since heating water to high temperatures ensures the destruction of bacteria, especially Legionella. When steam is injected into an airstream, both humidification and heating are accomplished in the same step.

In the most sensitive environments, such as surgery rooms, steam-based humidification is normally required by law to ensure that the system is free from airborne bacteria. Adiabatic humidification is accepted in some sensitive applications, and it provides considerable savings compared with steam systems, although it is necessary to ensure it can be used legally.

Vapor Diffusion Retarders

Vapor diffusion retarders, also known as vapor barriers, complement air drying and humidification systems by providing a barrier against the diffusion of moisture through walls or other elements of the building envelope. Vapor diffusion retarders are classified into three main categories, depending on their rated permeance value:

  • Class I vapor barriers are rated for 0.1 perms or less. Some examples are glass, sheet metal and polyethylene.
  • Class II vapor barriers are rated for permeance values above 0.1 perms but less than or equal to 10 perms. Plywood and unfaced extruded polystyrene are two examples.
  • Class III vapor barriers have permeance values above 10 perms, and some examples are gypsum board, cellulose insulation, bricks and concrete blocks.

The specification of vapor barriers is strongly dependent on weather conditions, and can be especially challenging in northern states, due to how drastically temperature and relative humidity fluctuate throughout the year. Getting in touch with a qualified design firm is highly recommended.

Ventilation for Sensitive Environments: Air Changes per Hour and Filtering

Ventilation systems for sensitive environments must meet specific requirements in terms of air changes per hour (ACH). In surgery rooms, for example, the American Institute of Architects establishes 15 ACH, where 20% must be outdoor air.

  • In a surgery room with a floor area of 600 ft2 and a height of 10 ft, 15 ACH is equivalent to 90,000 ft3 per hour, or 1500 cfm. The outdoor air required would be 300 cfm to meet the 20% requirement.

Filters for sensitive applications must typically meet a minimum MERV rating, and in applications that are especially sensitive compliance with the HEPA standard may be required.

MERV Ratings

MERV stands for Minimum Efficiency Reporting Value, and it is a measurement scale for the effectiveness of filters, which was developed by ASHRAE in the 80s. The scale of MERV ratings ranges from 1 to 16, where larger numbers indicate that the filter is rated for smaller particles and has a higher average arrestance.

  • MERV 1-4: 60 to 80% arrestance, particles larger than 10.0 µm.
  • MERV 5-8: 80 to 95% arrestance, 3.0 to 10.0 µm.
  • MERV 9-12: 90 to 98% arrestance, 1.0 to 3.0 µm.
  • MERV 13-16: Over 95% arrestance, particles from 0.30 to 1.0 µm.

In healthcare applications, filters with MERV ratings of 7 or more are normally specified. In some applications, two filters in tandem are used, where the second has a higher MERV rating than the first.

HEPA Standard

HEPA stands for High-Efficiency Particulate Arrestance, and a filter must remove 99.97% of particles with a diameter of 0.3 µm to qualify as such. It is important to note that the term HEPA has been adopted to refer to any high-efficiency filter, but only those meeting the requirements set forth in the standard are real HEPA filters.

In healthcare applications, HEPA filters are widely used thanks to their ability to capture airborne bacteria and viruses. Once they have been trapped, high-power ultraviolet lights are used to kill them.

It is important to note that higher performance filters also involve an increased pressure drop, raising energy consumption. For this reason, it is important to select a filter with adequate performance for the application, but not over-specified.

General Recommendations from Mechanical Engineers for Sensitive Environment HVAC Design

The most important requirement for HVAC systems in sensitive environments is being able to control humidity and temperature simultaneously, while filtering out pollutants. Therefore, designs based on rules of thumb should be avoided:

  • Sizing air conditioning equipment in tons per square foot of floor area.
  • Sizing ventilation equipment in cfm per ton of HVAC capacity.

Instead, each system must be designed by mechanical engineers to meet a specific temperature and humidity range, as well as air changes per hour and percentage of outdoor air. Hiring the services of qualified engineering professionals is highly recommended to ensure that requirements are met.

MEP Engineering Firms

Electrical Engineer Service Atlanta Georgia

Electrical Engineer Services in  Atlanta Georgia From Florida to Puerto Rico homeowners have come to rely on NY-Engineers.Com when they need expert MEP Engineering Services near Atlanta Georgia. With that said, it is vital to note that we are more than that. We're eight national engineering firm offering design but also advisory services. Although we are focused on mechanical, electrical and plumbing (MEP) installations. NY-Engineers.Com offers a range of services to property [...]

2019-03-02T18:24:00+00:00

MEP Engineer Service in Atlanta Georgia

MEP Engineer Service Atlanta Georgia A Great number of general contractors in New Mexico are aware that NY Engineers is the ideal partner if you're looking for Construction Administration. Nevertheless, and with the company's rapid growth many individuals have not to realize that New York Engineers is without a doubt top choice if you're looking for MEP Engineering Service in Atlanta Georgia. MEP is short for mechanical, electrical, and plumbing. Specifically, with [...]

2019-02-01T11:40:24+00:00