Electrical Engineer Services in  Auburn Alabama

Electrical Engineering Information

Building owners from Arizona to North Dakota, know that for fast MEP engineering service in Auburn Alabama – MEP.NY-Engineers.Com is the ideal choice. What a lot local building owners don’t know is that MEP.NY-Engineers.Com is also the ideal partners for anybody searching for Electrical Engineer near Auburn Alabama. Just so that you know that New York Engineers if a full-service national engineering agency offering MEP Engineer, Mechanical Engineering, Electrical Engineering, Plumbing Engineering, Sprinkler Engineering, Fire Protection Engineering, Construction Administration, Value Engineering, Energy Modeling, Utility Filings, Engineering Reports, Building Commissioning, CAD to Revit Modeling, Mechanical Engineering Services, Electrical Engineering Services, Plumbing Engineering Services, Sprinkler Engineering Services, Fire Protection Engineering Services, Construction Administration Engineering Services, Value Engineering Services, Energy Modeling Engineering Services, Utility Filings Engineering Services, Engineering Reports Services, Building Commissioning Engineering Services, CAD to Revit Modeling Engineering Services, and more. In regards to our Electrical Engineer near Auburn Alabama. As a full-service outfit we can help project with anything you can bring to us. However, out top requested jobs include but are not limited to Electrical Lighting Designs, Mechanical Power Designs, Electrical Riser Diagrams, Panel Board Schedules, New Building Electrical Design, Renovation Electrical Design, Preparation of Electric Load Letters, Emergency Generator Systems, Sub-Metering or Direct Metering, Switchgear, Main or Sub Distribution Panel, and Branch Wiring Design!

Precisely what do electrical engineers do? If you’re thinking of hiring an electrical engineer for any job, you are going to need to make sure you choose someone who comes strongly suggested, and you will also want to look for someone that is fully qualified. As well as that, you might be interested in learning a little more in regards to what an electrical engineer actually does. Here’s how you can learn more concerning this profession.

Talk To People Who Have Hired Engineers Previously – Among the finest ways to determine what it could be like to work alongside an electrical engineer is to talk with a number of your colleagues that have hired one in the past. If they had the engineer develop an electrical system for these people or hired these people to test their current equipment, you will have the ability to learn a lot using their experiences.

Interview Some Candidates – Not all the engineers have the same pair of skills. Before you hire anyone, you’ll want to take some time interviewing your top choices. During this interview, you will get the chance to look over their past work together with them. You can find out should they have relevant expertise.

Pay Attention To Your Project – Before deciding whether or not you need to hire one of these engineers, you need to measure the project that you’d be hiring them for. Take into account the work you would need these to do. Make time to consider what an engineer can do to suit your needs, and explore some of your other options at the same time.

Electrical engineers are designed for all kinds of electrical work. You need to take a good look at what these professionals do to help you determine if they could possibly help you with your preferences. You can benefit greatly when you hire a seasoned engineer to help you. As you can see NY-Engineers.Com is not just a local Electrical Engineering Service in Auburn Alabama. We can help your company with everything from MEP Engineer, Mechanical Engineering, Electrical Engineering, Plumbing Engineering, Sprinkler Engineering, Fire Protection Engineering, Construction Administration, Value Engineering, Energy Modeling, Utility Filings, Engineering Reports, Building Commissioning, CAD to Revit Modeling, Mechanical Engineering Services, Electrical Engineering Services, Plumbing Engineering Services, Sprinkler Engineering Services, to Fire Protection Engineering Services, Construction Administration Engineering Services, Value Engineering Services, Energy Modeling Engineering Services, Utility Filings Engineering Services, Engineering Reports Services, Building Commissioning Engineering Services, CAD to Revit Modeling Engineering Services and more. For more information on everything we do at MEP.NY-Engineers.Com take a look at our Sprinkler Engineering Services blog.

Top Blog Post Related to Electrical Engineer Services in Auburn Alabama

Radiant Heating Systems: Types and Applications for HVAC Engineering

Electrical Engineering Degree

Radiant heating systems deliver heat through the floor, walls or ceiling of a building. As implied by their name, these HVAC engineering systems rely mostly on radiant heat transfer – direct delivery of heat from a warm surface to occupants and objects via radiation.

Radiant floor heating systems are characterized by their silent operation and energy efficiency. Since the heat source is located below, temperature rise is uniform as warm air rises and displaces cooler air. This also allows heating to occur without a forced air system: the installation does not disturb dust and allergens, while improving occupant comfort by eliminating air drafts.

Radiant floor heating also offers a lower running cost than furnace-based heating systems – you can expect savings from 25% to 50% according to the US Department of Energy. Space heating is the highest energy expense in certain buildings, so projects that improve its efficiency tend to have an excellent return on investment.

Radiant floor heating is a great option for houses with children and for schools. Conventional air duct systems deliver heat from above, and the lower portion of the room is not always heated effectively because warm air tends to rise. Due to their shorter height, kids are more susceptible to uneven heating from forced air systems, and this can potentially lead to health issues. On the other hand, radiant floor heating delivers heat from the bottom up and improves comfort for kids.

Radiant heat systems are highly recommended HVAC engineering solutions in houses with big rooms and high ceilings. Conventional forced air systems are impractical in these cases, since they only tend to heat the upper portion of the room, wasting energy.

Types of Radiant Floor Heating Systems, Explained by an HVAC Engineering Pro

Radiant floor heating systems can be classified based on the medium used to deliver heat: air-heated, electric and hydronic.

1) Air-heated radiant floor system: In this system configuration, hot air is blown through the ducts beneath the floor, which causes a warming effect. The main limitation is that air cannot hold much heat, so these systems are not suited for residential buildings.

2) Electric radiant floor system: This configuration uses heating cables or conductive plastic mats that are built into the floor. The main limitation of electric radiant floor systems is their dependence on resistance heating, which can result in a very high running cost if the kilowatt-hour price is high.

Electric radiant floor heating works best for property owners that have access to time-of-use electricity rates and floors with a large thermal mass (e.g. concrete). The system can be configured to operate when electricity prices are low, which is normally during off-peak hours, storing as much heat as possible in the floor itself.

The system is also set to shut down during peak demand hours with expensive electricity, and the floor can deliver from 8 to 10 hours of heating without power consumption if its thermal mass is high enough. If the floor has a reduced thermal mass, the electric RFH system must operate more frequently, and running costs can increase dramatically during peak demand hours.

3) Hydronic (hot water) radiant floor system: This is the most popular and cost-effective among the three types of radiant floor systems, and is suitable for applications where occupants can use a thermostat to control the heat output room-by-room. Hot water from a boiler is pumped through hydronic pipes that are evenly distributed under the floor, and distribution among different piping runs is controlled through a manifold. Hydronic RFH systems have minimal maintenance requirements and can be installed between the joists under existing floors, making them ideal for renovations.

Radiant Floor Heating Installation Types

Radiant floor heating systems can be classified into wet and dry installations. Note that this classification is independent from the heat transfer medium: the words wet and dry to not make reference to hydronic piping or electrical resistance.

1) Wet installation: This is the oldest type of radiant floor installation. Electrical cables, mats or hydronic tubing are embedded in a thick concrete slab or thin concrete subfloor, which means this installation type is more expensive than a dry one. The RFH system takes more time to heat the floor and the air in the room, but the large thermal mass of concrete preserves the heating effect for several hours after the system is turned off.

2) Dry installation: A dry installation is easier to set up, less expensive and generally the most convenient type. The heating cables, mats or tubing are installed in a pocket of air under the floor, not embedded in concrete, resulting in a faster heating than a wet installation. This system configuration needs to operate at a high temperature however, since it is not embedded in the floor material.

How Flooring Materials Influence Performance

The performance of radiant floor heating is strongly influenced by the flooring material: thermally-conductive materials enhance performance, while insulating materials are detrimental. However, this does not imply you should avoid insulation – just make sure it is not installed where it can block heat transfer between the radiant floor system and indoor spaces.

Due to its high thermal conductivity and storage capacity, ceramic tile is considered the most effective covering material for radiant floor heating. Other materials such as vinyl and linoleum sheet provide too much insulation, hence reducing system efficiency. Wood floors conduct the heat quite well, but laminated wood flooring is prefered over solid wood, which can easily dry and contract.

How Do Radiant Panels Work?

Unlike radiant floor systems, these panels are generally installed in walls and ceilings, using electricity or hot water to heat aluminum sheets. Electrically-heated systems offer the convenience of preventing water leakage issues, but also have a much higher running cost due to dependence on electricity. Radiant panel systems can have a superficial construction or can be embedded in the wall, but keep in mind that future alterations are impractical in the second case.

What Are the Key Components of Radiant Floor Heating Systems?

1) PEX tubing/heating cables/heating mats: This part of the system is responsible for delivering heat. PEX tubing distributes hot water from a boiler, while the other two options produce heat directly through electrical resistance.

2) Manifold: Distributes hot water among various hydronic piping circuits.

3) Actuator valves and fittings: Valves allow water flow control, while fittings provide a connection between piping runs and other system components.

4) Control pack: Operates the system based on user settings.

5) Heating control (thermostat): Lets the user establish the required temperature.

Benefits of Radiant Floor Heating

1) RFH is suitable for new constructions with large rooms and high ceilings, improving both performance and comfort.

2) Easily-adjustable comfort levels and heating controls.

3) Energy savings and reduced bills.

4) More free space is available, by eliminating forced air systems and their associated ducts.

5) Air moves by natural convection, minimizing the spread of dust and allergens.

6) Silent operation

7) Universal control

If you are ever uncertain as to which method of radiant floor heating is most suitable for your space, consult the expertise of an HVAC engineering professional.

Electrical Engineering Basics

Electrical Engineer Service Auburn Alabama

Electrical Engineer Services in  Auburn Alabama From Alaska to Montana developers have come to rely on NY Engineers when they need fast MEP Engineers in Auburn Alabama. Nevertheless, it is vital to highlight that we are more than that. We are eight national engineering agency offering design but also advisory services. Although our focus is in mechanical, electrical and plumbing (MEP) installations. We offer a wide range of services to property developers [...]

2019-03-02T19:19:29+00:00

MEP Engineer Service in Auburn Alabama

MEP Engineer Service Auburn Alabama A Great number of real estate developers throughout Tennessee know that NY-Engineers.Com is the right candidate if you're in search of the best Building Commissioning. Nevertheless, due to the firms continuous growth many individuals have failed to realize that NY-Engineers.Com is the unequivocal top partner if you're in search of MEP Engineering Service in or near Auburn Alabama. MEP is short for mechanical, electrical, and plumbing. Specifically, [...]

2019-02-08T16:43:26+00:00