Electrical Engineer Services in  Bellevue Washington

Best MEP Engineering Firms

Builders from Hawaii to Utah, know that for fast MEP engineering service in Bellevue Washington we is the best choice. What a lot local architects don’t know is that we is also the best option for anyone looking for Electrical Engineer in or near Bellevue Washington. For the record New York Engineers if a full-service engineering company offering Energy Modeling, Utility Filings, Engineering Reports, Building Commissioning, CAD to Revit Modeling, Mechanical Engineering Services, Electrical Engineering Services, Plumbing Engineering Services, Sprinkler Engineering Services, MEP Engineer, Mechanical Engineering, Electrical Engineering, Plumbing Engineering, Sprinkler Engineering, Fire Protection Engineering, Construction Administration, Value Engineering, Building Commissioning Engineering Services, CAD to Revit Modeling Engineering Services, Fire Protection Engineering Services, Construction Administration Engineering Services, Value Engineering Services, Energy Modeling Engineering Services, Utility Filings Engineering Services, Engineering Reports Services, and more. In regards to our Electrical Engineer in or near Bellevue Washington. As a full-service firm we can help you with just about anything you can bring to us. Nevertheless, out most requested projects include but are not limited to Electrical Lighting Designs, Mechanical Power Designs, Electrical Riser Diagrams, Panel Board Schedules, New Building Electrical Design, Renovation Electrical Design, Preparation of Electric Load Letters, Emergency Generator Systems, Sub-Metering or Direct Metering, Switchgear, Main or Sub Distribution Panel, and Branch Wiring Design.

So, what do electrical engineers do? If you’re thinking of hiring an electrical engineer for a job, you’re likely to need to make sure you choose someone who comes highly recommended, and you’ll want to search for somebody who is fully qualified. In addition to all of that , you might be interested in learning a little more in regards to what an electric engineer actually does. This is how uncover more regarding this profession.

Talk To People That Have Hired Engineers In The Past – One of the better ways to find out what it could be like to use an electric engineer is to talk with several of your colleagues which have hired one in the past. If they had the engineer develop an electrical system for them or hired them to test their current equipment, you’ll have the ability to learn a lot from their experiences.

Interview Some Candidates – Not all the engineers have the same group of skills. Before you hire anyone, you will desire to invest some time interviewing your top choices. In this interview, you’ll have the opportunity to go over their past work together with them. You can find out if they have relevant expertise.

Pay Attention To Your Project – Before deciding whether you should hire one of these engineers, you must measure the project that you are hiring them for. Consider the work you will need them to do. Take the time to consider what an engineer would be able to do for you, and explore a few of your other available choices also.

Electrical engineers are designed for all types of electrical work. You ought to take a close look at what these professionals do to help you see if they might be able to support you with your preferences. You can benefit greatly if you hire a skilled engineer to assist you. As you can see we are not just your local Electrical Engineering Service in Bellevue Washington. We can help you with everything from Electrical Engineering Services, Plumbing Engineering Services, Sprinkler Engineering Services, Fire Protection Engineering Services, Construction Administration Engineering Services, Value Engineering Services, Energy Modeling Engineering Services, Utility Filings Engineering Services, Engineering Reports Services, Building Commissioning Engineering Services, to CAD to Revit Modeling Engineering Services, MEP Engineer, Mechanical Engineering, Electrical Engineering, Plumbing Engineering, Sprinkler Engineering, Fire Protection Engineering, Construction Administration, Value Engineering, Energy Modeling, Utility Filings, Engineering Reports, Building Commissioning, CAD to Revit Modeling, Mechanical Engineering Services and more. For more information on everything we do at NY Engineers take a look at our blog.

Article Related to Electrical Engineer Services in Bellevue Washington

Construction Engineers Explain How HVAC Systems Move Heat

Construction Engineer Job Description

Heat movement is required for both space heating and air conditioning. Space heating systems deliver heat and air conditioning systems remove it, but the goal in both cases is reaching a suitable indoor temperature. Construction engineers can explain how, though heat can be transmitted across empty space by radiation, using convection and the bulk movement of a fluid is much more effective. In HVAC applications, the most common fluids used to carry heat are air, water, refrigerants, and steam.

Since each substance has different properties, the heat distribution fluid used by an HVAC system determines many performance features. Also consider that different fluid may be used in the same system, with intermediate heat exchange steps.

Heat Distribution with Air

The main advantage of using air to carry heat is simplicity: air is already present in the atmosphere and indoor spaces, so there is no need to use additional fluids in the HVAC system.  Air can interact directly with AC compressors, furnaces or heat pumps to adjust its temperature, and it can then be distributed using fans and ductwork.

However, air ducts require more space than the piping used by other heat-carrying fluids, and they are impractical when air must travel long vertical distances. Consider that warm air rises while cool air tends to fall below, and fan power increases dramatically if you need to move air against its natural behavior. This is neither practical nor energy efficient!

When air ducts must serve separate zones, its distribution is typically controlled with air dampers. These can adjust their position between fully open and fully closed as needed to regulate airflow, and they are controlled automatically by the thermostats in each zone.

One of the most promising system upgrades for air distribution systems promoted by construction engineers is adding variable frequency drives (VFD) to the fans. Reducing fan speed is much more efficient than intermittent operation when you don’t need the full rated airflow. In the case of fractional horsepower fans, a brushless DC motor is recommended instead of a VFD, since they come with built-in speed control.

Packaged rooftop units are an example of an HVAC system that uses air as the main heat distribution and heat removal medium.

Heat Distribution with Water

Some HVAC systems heat or cool water instead of air, and water then interacts with indoor air through fan coils. When this configuration is used, the installation is referred to as a hydronic system. Compared with air, water can hold much more heat per unit of volume, thanks to its higher specific heat and density. As a result, it is the preferred heat-carrying medium in large commercial and industrial installations: hydronic piping uses much less space than air ducts for a given heating or cooling load.

Just like airflow can be controlled with dampers and VFD-equipped fans, the flow of water in a hydronic system can be controlled with valves and VFD-equipped pumps. The basic principle is the same: finding an operating point where each zone is kept at the required temperature and humidity, at the lowest energy cost possible.

Chillers and boilers are two examples of HVAC systems that rely on water to carry heat. Indoor air can then be heated or cooled using fan-coils. Another possible configuration is using larger air-handling units (AHU) connected to an air duct system, where heat exchange occurs between the hydronic piping and the air being circulated by the AHU.

Refrigerant

All air conditioning compressors and heat pumps use refrigerant internally, but there also HVAC systems with longer refrigerant lines connecting different pieces of equipment. Refrigerant lines are even more compact than hydronic piping, not to mention air ducts. Just like when water is used to carry heat, refrigerant flow can be controlled with the combination of valves and variable speed control for the compressor.

Ductless air conditioners and heat pumps use refrigerant lines between the condenser and evaporator units, and typically offer a very high efficiency. The concept can also be applied for multiple zones served by a single outdoor unit, using a variable refrigerant flow system (VRF). VRF systems are very efficient as well, while consolidating heating and cooling systems into a single installation.

Steam

Many buildings in New York City use steam as a heat-carrying fluid, since a significant portion of the city gets steam as a utility service from Con Edison. However, if you plan to install your own boiler, a hot water system is preferred over a steam system.

The main drawback of steam is that you can use it only for heating in most cases. The only way to achieve cooling with steam through an absorption chiller, but a conventional electric chiller is much more economic in multifamily and commercial settings. Absorption chillers are better suited for applications where heat is available at a very low cost or as a waste product of industrial activity – not when you are paying for steam as utility service.

Since steam cannot be used directly for cooling, buildings with steam radiators often have window-type or through-the-wall air conditioning units. These normally suffer from poor efficiency, so you can consider upgrading to ductless units while the heating system is retrofitted to use hot water.

Our Construction Engineers’ Conclusion

HVAC systems are characterized by their variety, and each configuration brings a different set of performance features. Working with qualified HVAC consultants and construction engineers is recommended to identify the system configuration that works best, according to the specific needs of your building. Also keep in mind that only a registered design professional can submit HVAC designs for approval by the NYC Department of Buildings.

Top Engineering Firms

Electrical Engineer Service Bellevue Washington

Electrical Engineer Services in  Bellevue Washington From Florida to Virgin Islands developers have come to rely on us when they need expert MEP Engineering Services in or near Bellevue Washington. With that said, it is adequate to point out that NY Engineers is more than that! We're eight national engineering outfit offering not only design but also consulting services. Although our focus is in mechanical, electrical and plumbing (MEP) installations. We offer [...]

2019-02-19T03:42:34+00:00

MEP Engineer Service in Bellevue Washington

MEP Engineer Service Bellevue Washington A Great number of architectural firms in New Mexico know that New York Engineers is the preferred choice if you are looking for Utility Filings Engineering Services. With that said, primarily because of the company's constant expansion many building owners have not to realize that NY-Engineers.Com is without a doubt best partner when you are in search of MEP Engineer in or near Bellevue Washington. MEP is [...]

2019-01-22T00:29:26+00:00