Electrical Engineer Services in  Fort Collins Colorado

Fire Protection Engineering Magazine

Building owners from Arizona to Texas, are aware that for fast MEP engineering service in Fort Collins Colorado – New York Engineers is the ideal choice. What many local architects don’t know is that NY-Engineers.Com is also the ideal partners for everyone searching for Electrical Engineering Service in or near Fort Collins Colorado. It is important to point out that New York Engineers if a full-service national engineering firm offering Energy Modeling, Utility Filings, Engineering Reports, Building Commissioning, CAD to Revit Modeling, Mechanical Engineering Services, Electrical Engineering Services, Plumbing Engineering Services, Sprinkler Engineering Services, MEP Engineer, Mechanical Engineering, Electrical Engineering, Plumbing Engineering, Sprinkler Engineering, Fire Protection Engineering, Construction Administration, Value Engineering, Building Commissioning Engineering Services, CAD to Revit Modeling Engineering Services, Fire Protection Engineering Services, Construction Administration Engineering Services, Value Engineering Services, Energy Modeling Engineering Services, Utility Filings Engineering Services, Engineering Reports Services, and more. In regards to our Electrical Engineer in or near Fort Collins Colorado. As a full-service firm we can help project with just about anything you can bring to us. Nevertheless, out most popular projects include but are not limited to Electrical Lighting Designs, Mechanical Power Designs, Electrical Riser Diagrams, Panel Board Schedules, New Building Electrical Design, Renovation Electrical Design, Preparation of Electric Load Letters, Emergency Generator Systems, Sub-Metering or Direct Metering, Switchgear, Main or Sub Distribution Panel, and Branch Wiring Design.

Exactly what do electrical engineers do? If you are considering hiring an electric engineer for a job, you are gonna want to successfully choose someone who comes strongly suggested, and you’ll want to look for someone that is totally qualified. As well as that, you will want to learn a bit more in regards to what an electrical engineer actually does. This is how discover more relating to this profession.

Talk With People That Have Hired Engineers Before – Among the best ways to discover what it would be like to work with an electrical engineer is to talk to several of your colleagues who have hired one in the past. Whether or not they had the engineer develop a power system on their behalf or hired these people to test their current equipment, you’ll be capable of learn a lot off their experiences.

Interview Some Candidates – Not all engineers have the same list of skills. Before you hire anyone, you will want to take some time interviewing your top choices. Throughout this interview, you will have the opportunity to go over their past deal with them. You can find out in case they have relevant expertise.

Pay Attention To Any Project – Before deciding whether or not you must hire one of these brilliant engineers, you must look at the project that you will be hiring them for. Look at the work you would need these to do. Take the time to consider what an engineer would be able to do for you personally, and explore a few of your other available choices also.

Electrical engineers are equipped for a myriad of electrical work. You must take a close look at what these professionals do to be able to find out if they could possibly assist you with your needs. You could benefit greatly when you hire a seasoned engineer to be of assistance. As you can see NY Engineers is not just your local Electrical Engineering Service in Fort Collins Colorado. We can help your company with everything from Energy Modeling, Utility Filings, Engineering Reports, Building Commissioning, CAD to Revit Modeling, Mechanical Engineering Services, Electrical Engineering Services, Plumbing Engineering Services, Sprinkler Engineering Services, MEP Engineer, Mechanical Engineering, Electrical Engineering, to Plumbing Engineering, Sprinkler Engineering, Fire Protection Engineering, Construction Administration, Value Engineering, Building Commissioning Engineering Services, CAD to Revit Modeling Engineering Services, Fire Protection Engineering Services, Construction Administration Engineering Services, Value Engineering Services, Energy Modeling Engineering Services, Utility Filings Engineering Services, Engineering Reports Services and more. For more information on everything we do at NY-Engineers.Com take a look at our Energy Modeling Engineering Services blog.

Top Blog Article Related to Electrical Engineer Services in Fort Collins Colorado

Heating and Cooling Upgrades: Where to Start? Architectural Engineers Have This Advice

Electrical Engineering Salary

Space heating represents the highest energy use in many buildings. In addition, domestic hot water and space cooling systems use less energy than space heating, but they are also among the top five building systems that use the most energy. According to architectural engineers, a building can reduce its energy consumption dramatically by replacing its existing heating and cooling systems with modern and high-efficiency equipment.

However, before proceeding with a large-scale building upgrade it is necessary to define a starting point. Building upgrades are investments after all, where the property owner spends capital with the goal of achieving a permanent reduction in building ownership cost. In other words, building system upgrades only make sense from the financial standpoint if the long-term benefit outweighs the associated upfront expenses.

Is There an Upcoming Major Renovation?

Heating and cooling upgrades provide long-term benefits but can be disrupting for building operation. If a major renovation is planned in the short term, it represents an excellent chance to also improve HVAC performance.

A major renovation also provides an excellent chance to improve the building envelope, architectural engineers advise. Poor insulation and air leaks can be detected and fixed, reducing the required heating and cooling capacity after the renovation. This way, the new heating and cooling systems can be specified not only with a higher efficiency, but also with a lower capacity.

  • For example, if you replace a 100-ton air-cooled chiller consuming 1.2 kW/ton with a more efficient water-cooled unit that only uses 0.6 kW/ton, you achieve 50% energy savings.
  • However, if the new unit has a required capacity of only 80 tons thanks to building envelope improvements, energy savings are increased to 60%.

A building envelope improvement can be complemented with a lighting system upgrade. Solid-state LED lighting emits significantly less heat than incandescent, halogen or old fluorescent lighting. All this heat is subtracted from space cooling loads, providing additional energy savings beyond those achieved directly with the lighting upgrade.

Consider that a 60-watt incandescent bulb can generally be replaced with a 10-watt LED bulb, and a 4-lamp T12 fluorescent fixture (4x 34W) can generally be replaced with an integral LED fixture consuming 40-45W. The lighting heat reduction is not significant for a single fixture, but can save several tons of cooling capacity in a building with hundreds of inefficient fixtures.

Building Upgrades: Cost and Benefit

When upgrading a building it can be tempting to prioritize space heating systems, since they consume the most energy. However, it is also important to consider the energy source used by each appliance.

For a given amount of energy delivered, electricity is far more expensive than gas in major cities. Natural gas from Con Edison has a price of around 1.05 USD per therm for residential users, which translates to approximately 3.6 cents per kWh of heat, before considering appliance efficiency. On the other hand, electricity prices typically exceed 20 cents per kWh. Even if most combustion appliances are less efficient than electric appliances, the price of electricity is too high compared with that of gas. This effect is evident in electric resistance heaters, which are around four times more expensive to operate than gas heaters.

Property owners can achieve the best results by getting a professional energy audit before deciding which building upgrades to carry out. With an energy audit, property owners can get a detailed breakdown of energy efficiency measures, along with the expected cost of each. More importantly, an energy audit helps determine the return on investment for each energy efficiency measure – how many dollars will it return over its service life for each dollar spent upfront? Given the price gap between electricity and gas, upgrades that target electric system generally offer a shorter payback period and a higher ROI.

Before proceeding with any building upgrade, checking the Con Edison incentive program is highly advised. Many energy efficiency measures are eligible for attractive cash rebates, which further improves their financial performance. Consider that some rebate programs only apply during certain times of the year or have limited funding, so building upgrades should be planned accordingly.

Importance of Building Type to Architectural Engineers

Not all buildings consume energy the same way. For example, mechanical ventilation typically represents around 13% of energy use in office buildings, but only 1% in multifamily residential settings. This is a consequence of the requirements established by construction codes for each property type – natural ventilation design is mandatory in residential constructions, but designers can choose between natural and mechanical ventilation for office buildings. Domestic hot water systems experience the opposite effect as ventilation systems, representing only 2% of energy use in office buildings but 19% in multi-family residential buildings.

Differences like this are present for many building systems. For example, office occupancy is normally higher than residential occupancy during the day, which extends lighting and space cooling schedules for office buildings, and the corresponding energy expense. However, this does not mean lighting and cooling upgrades should be discarded in the residential sector: these systems represent a reduced percentage of energy consumption but are typically older than those found in office buildings, which can result in an attractive financial return.

Final Recommendations

When deciding which cooling and heating upgrades to prioritize, it is very important to select an adequate time frame for the project, and getting an energy audit to determine the cost and benefit of each measure. Ideally, deep retrofits should be scheduled along with major renovations to minimize disruption and cost. It is also important to find synergy between upgrades, for example when both lighting and space cooling are upgraded. Of course, the financial return is also a very important consideration: as a property owner you will want to prioritize measures that maximize the return on each dollar invested.

In general, energy efficiency measures that target electric systems will have a better financial performance than those targeting gas-fired systems. Nevertheless, there are exceptions to this; an energy audit of the building is the best way to tell, agree experienced architectural engineers.

MEP Engineering Books

Electrical Engineer Service Fort Collins Colorado

Electrical Engineer Services in  Fort Collins Colorado From California to Utah general contractors have come to rely on New York Engineers when they need reliable MEP Engineering Services in or near Fort Collins Colorado. With that said, it is imperative to note that NY Engineers is more than that. We're eight national engineering outfit offering not only design but also consultation services. Even though our focus is in mechanical, electrical and plumbing [...]

2019-02-11T17:16:02+00:00

MEP Engineer Service in Fort Collins Colorado

MEP Engineer Service Fort Collins Colorado A Great number of builders in Guam are aware that NY-Engineers.Com is the go to company if you are in search of the best CAD to Revit Modeling. However, and with the company's rapid growth many individuals have failed to realize that NY-Engineers.Com is the unequivocal top partner when you're in search of MEP Engineering Service near Fort Collins Colorado. MEP means mechanical, electrical, and plumbing. [...]

2019-01-29T08:09:50+00:00