Electrical Engineer Services in  San Diego California

Construction Engineers

Builders from Minnesota to New Jersey, know that for professional MEP engineering service in San Diego California – NY-Engineers.Com is the ideal option. What quite a few local building owners don’t know is that we is also the best option for anybody looking for Electrical Engineering Service in San Diego California. Just so that you know that New York Engineers if a full-service engineering firm offering Energy Modeling, Utility Filings, Engineering Reports, Building Commissioning, CAD to Revit Modeling, Mechanical Engineering Services, Electrical Engineering Services, Plumbing Engineering Services, Sprinkler Engineering Services, MEP Engineer, Mechanical Engineering, Electrical Engineering, Plumbing Engineering, Sprinkler Engineering, Fire Protection Engineering, Construction Administration, Value Engineering, Building Commissioning Engineering Services, CAD to Revit Modeling Engineering Services, Fire Protection Engineering Services, Construction Administration Engineering Services, Value Engineering Services, Energy Modeling Engineering Services, Utility Filings Engineering Services, Engineering Reports Services, and more. About our Electrical Engineering Service in or near San Diego California. As a full-service firm we can help you with just about anything you can bring to the table. Nevertheless, out most popular jobs include but are not limited to Electrical Lighting Designs, Mechanical Power Designs, Electrical Riser Diagrams, Panel Board Schedules, New Building Electrical Design, Renovation Electrical Design, Preparation of Electric Load Letters, Emergency Generator Systems, Sub-Metering or Direct Metering, Switchgear, Main or Sub Distribution Panel, and Branch Wiring Design.

What do electrical engineers do? If you are considering hiring an electrical engineer for the job, you’re gonna need to successfully choose someone that comes strongly suggested, and you’ll also want to try to find someone who is fully qualified. In addition to all of that , you will want to learn a little bit more in regards to what an electric engineer actually does. This is how discover more relating to this profession.

Speak To People Who Have Hired Engineers Before – Among the finest ways to find out what it could be like to use an electrical engineer is to talk to a number of your colleagues which have hired one before. If they had the engineer develop an electrical system for these people or hired these people to test their existing equipment, you’ll be able to learn considerably using their experiences.

Interview Some Candidates – Not all the engineers have got the same pair of skills. Prior to hiring anyone, you’ll wish to take some time interviewing your top choices. Within this interview, you’ll have the opportunity to look over their past work with them. You will discover if they have relevant expertise.

Look Closely At Your Project – Before deciding if you need to hire one of those engineers, you must measure the project that you will be hiring them for. Look at the work you would need these to do. Take time to consider what an engineer can do for you personally, and explore a number of your additional options as well.

Electrical engineers are prepared for all kinds of electrical work. You must take a closer look at what these professionals do to enable you to find out if they could possibly aid you with your needs. You might benefit greatly if you hire an experienced engineer to help you. As you can see we are not just an Electrical Engineer in or near San Diego California. We can help you with everything from Electrical Engineering Services, Plumbing Engineering Services, Sprinkler Engineering Services, Fire Protection Engineering Services, Construction Administration Engineering Services, Value Engineering Services, Energy Modeling Engineering Services, Utility Filings Engineering Services, Engineering Reports Services, Building Commissioning Engineering Services, to CAD to Revit Modeling Engineering Services, MEP Engineer, Mechanical Engineering, Electrical Engineering, Plumbing Engineering, Sprinkler Engineering, Fire Protection Engineering, Construction Administration, Value Engineering, Energy Modeling, Utility Filings, Engineering Reports, Building Commissioning, CAD to Revit Modeling, Mechanical Engineering Services and more. For more information on everything we do at NY-Engineers.Com take a look at our blog…

Post Related to Electrical Engineer Services in San Diego California

Mechanical Engineering Design Options to Heat and Cool Residential Buildings

Best MEP Engineering Firms

There is a broad range of mechanical engineering and design options available for meeting the heating and cooling needs of residential buildings. Normally, these systems differ in terms of the medium used to deliver their heating or cooling output.

  • Water Piping: Water source heat pumps, radiators using chillers, cooling towers, and boilers.
  • Air Ducts: Packaged rooftop units, packaged ceiling hung units
  • Refrigerant Lines: Split AC systems, VRF systems
  • Direct: Used by window-type air conditioners and PTAC units, which operatedirectly between indoor and outdoor locations, without ducts.

This article will provide an overview of some of the most common mechanical design options used for indoor residential spaces, as well as the strengths and limitations of each type of system:

Detailing Mechanical Engineering and Design Options

Mechanical Design Option #1: Four-Pipe System with Chiller, Cooling Tower, and Boiler

This mechanical design gets its name from the fact that it has two separate water circuits, one carrying hot water and another carrying chilled water, each with a supply and return pipe. The basic operating principle of four-pipe systems is the following:

  • Cooling is accomplished by a chiller and cooling tower: A chilled water circuit is used to remove heat from indoor spaces, and the cooling tower is used to reject it outdoors. If the chiller’s compressor comes equipped with a variable-speed drive, this system can offer a very high efficiency in cooling mode.
  • Heating efficiency is determined by the type of boiler. In general, gas-fired boilerstend to be more cost-effective than those running on oil or electrical resistance heating.
  • Fan-coil units are equipped with both hot and cold water coils, granting them the flexibility of either mode of operation.

The main advantage of four-pipe systems is their ability to use both modes of operation simultaneously and independently. This can be especially useful if heating and cooling needs are different across building zones, and especially in apartment buildings and multi-family dwellings where preferences and schedules normally vary by occupant. Of course, a four-pipe system is an expensive mechanical engineering system to install due to the presence of three separate water circuits: two for the distribution of cold and hot water, and a third one used by the chiller to reject heat through the cooling tower.

Mechanical Design Option #2: Water-Source Heat Pumps with Cooling Tower and Boiler

A heat pump can be described in simple terms as a reversible air conditioner: it can deliver indoor cooling through the refrigeration cycle, but can also operate in heating mode with a much higher efficiency than most types of boilers, especially electrical resistance boilers.

Due to their reversible operation, water-source heat pumps offer great flexibility in residential buildings. Individual units can be set to operate in different modes, and in combined heating and cooling applications the overall system can be extremely efficient:

  • Heat pumps in cooling mode extract heat from indoor spaces and release it into a common water circuit.
  • Then, heat pumps in heating mode can extract the heat now carried by the water, and release it indoors, as required.

The fact that heat pumps share the same water circuit means that the cooling tower and boiler only have to balance system loads, rather than meeting them fully:

  • If the cooling load is greater than the heating load, the cooling tower only has to reject the heat difference, not the total heat removed from all spaces.
  • The same logic applies if the heating load is higher than the cooling load: the boiler only has to make up for the difference, not the full heating load.
  • If the heating and cooling loads happen to balance each other out, both the cooling tower and boiler can remain off.

A four-pipe system lacks these capabilities: the chiller must assume the full cooling load while the boiler provides the full heating load – all the heat absorbed in the chilled water loop is rejected by the cooling tower, and can’t be used for space heating purposes because water circuits are independent.

HVAC systems based on water-source heat pumps are extremely efficient, although expensive due to the fact that every zone must be equipped with an individual heat pump, in addition to having a common water circuit, a cooling tower, and a boiler.

Mechanical Design Option #3: VRF System with Rooftop Condensers & Gas Boiler

VRF stands for variable refrigerant flow, and VRF systems get their name from the fact that refrigerant is used to transport heat instead of water:

  • One or more remotely located condensers provide a flow of refrigerant for multiple indoor fan-coils, and a variable speed drive is used to regulate flow according to load. The units can also provide their own heating.
  • For supplementary heating, a gas-fired boiler with perimeter radiation can be added to the system.
  • Two-pipe VRF systems require all fan-coils to operate in the same mode, but with three-pipe systems, it is possible to provide simultaneous heating and cooling for different areas of the building.

Other than operational flexibility, an advantage of this mechanical design option is their ease of installation: refrigerant lines are more compact than water piping and air ducts. These systems still have a relatively small market share in the USA, but are very common in Japan, where they were developed, and Europe. According to ASHRAE, VRF systems tend to have a comparable cost to that of chiller-based systems, potentially higher if the technology must be imported.

The modular nature of VRF systems is another strong point in favor of this technology. If there will be a building expansion, it is possible to expand the system by simply adding a new condenser and the corresponding indoor evaporators.

Mechanical Design Option #4: PTAC Units with Electric Resistance Heating

Packaged terminal air conditioning units (PTAC) are compact systems, very similar to old window-type air conditioners: the system is self-contained and does not require refrigerant lines, water piping, or air ducts, greatly reducing the installed cost. Some PTAC units are equipped with a resistance heater, allowing them to operate in both heating and cooling modes.

PTAC units offer the advantage of being self-contained and independent from each other. This gives them an advantage in projects that will be built in several stages, for example, apartment buildings, since it is possible to expand HVAC capacity as needed without having a common system on which all units depend.

The main limitation of this mechanical system is that they tend to be outclassed by other systems in terms of efficiency, especially when in heating mode. Resistance heating offers a coefficient of performance of 1.0, which means they must draw one watt of electricity per each watt of heating; on the other hand, heat pumps typically operate with a COP of 2.5 or more, or even above 4.0 if a high-efficiency heat pump is selected.

Concluding Remarks

There is a broad range of heating and cooling technologies available for residential buildings, and also a high degree of flexibility in how the overall system can be configured. No system can be considered superior to the rest under all circumstances – every project offers unique conditions that favor some technologies over others.

What kind of mechanical engineering design has worked the best for you? Let us know by commenting below.

Construction Engineers Near Me

Electrical Engineer Service San Diego California

Electrical Engineer Services in  San Diego California From Alabama to Puerto Rico developers have come to rely on NY-Engineers.Com when they need expert MEP Engineers in or near San Diego California. With that said, it is adequate to point out that NY Engineers is more than that! We are eight national engineering firm offering design but also advisory services. Even though we are focused on mechanical, electrical and plumbing (MEP) installations. We [...]

2019-03-08T00:07:17+00:00

MEP Engineer Service in San Diego California

MEP Engineer Service San Diego California Many top real estate developers in North Dakota are aware that New York Engineers is the right candidate if you are in search of the best Mechanical Engineering Services. With that said, primarily because of the company's constant expansion many general contractors have failed to realize that MEP.NY-Engineers.Com is without a doubt best partner if you're looking for MEP Engineering Service near San Diego California. MEP [...]

2019-02-06T07:52:55+00:00