Fire Sprinkler Design Engineer in Bolingbrook

Contact Us

Looking for Fire Sprinkler Plumbing Design Experts in or near Bolingbrook Illinois? Your best bet is to reach out to is NY-Engineers.Com. Not only for Commercial & Residential Fire Sprinkler Systems Design but also Electrical Engineering and HVAC Chicago. Call 312 767.6877

Contact Us
Construction Engineering Vs Civil Engineering

Solicit any contracting company or building owner form Dunning Chicago to Sheridan Station Corridor Chicago, and have them recommend you a affordable MEP Engineering in Chicago, and the majority will say contact New York Engineers. What’s not commonly known is that NY-Engineers.Com also your top choice for anyone looking for a fire sprinkler system engineering in Bolingbrook. To be honest there is no shortage of HVAC engineering or sprinkler system engineering firms in Bolingbrook. However, when it comes to reliability is always best to choose a company like NY Engineers.

When you’re prepared to plan the making of a building, the first professionals who you must check with is known as a fire protection engineer. They are individuals who are knowledgeable about design safeguards and threats that ought to be studied. They might aid in the look of any building, ensuring that you may have the cabability of control, and in addition stop, fires that may be catastrophic. They often work with developers, architects, and building owners that are responsible for the construction of a whole new building or home. Plenty good reason exist for hiring a fire protection engineer that you should consider.

Why you need to hire one of those experts – Here are the two main reasons for getting a fire protection engineer. To begin with, you should ensure the care of everyone which will sooner or later be at that house frequently. Also, it is very important to have several possible safeties in position in the event that a fire happens. Everything that they advise is going to be respected by investors, and subsequently incorporated into the specific structure. If choosing a fire protection engineer is the next step of your project, you can easily find many of them that can help you.

Exactly What Is The Concept Of Fire Protection Engineer in Bolingbrook?

The meaning of fire protection engineer is the study of fire with regards to our built-up environment and just how architectural design sways the causes and spread of fire. Besides, this task of engineering involves utilizing engineering principles (mechanical, chemical, electrical, and civil engineering), physics, material science, chemistry, technology to implement underlying fire suppression system that safeguards both humans as well as the property involved.

In this connection, fire protection engineering is really a study and field that may be associated with saving lives and property from fire way before fire emerges. Fire protection engineers apply their skill to influence the way the fire suppression system within a building occurs. To this end, they will likely have a say in the design of a building, the materials utilized in the making of the construction, and the building layout. Essentially, a fire protection engineer may have input in relation to fire discovery and suppression method used.

Their efforts make certain that each time a fire starts, the suppression system actively works to suppress the fire effectively, and give time for everyone inside the building to escape to safety. Moreover, the suppression system that is choosen should hinder the spread of fire, nullifying the potential of the fire spreading even more. Even with all of this information you would like additional info on fire sprinkler engineering services in Bolingbrook by NY Engineers you should stop by at our Chicago Sprinkler Engineering blog.

New Plumbing Engineering Related Post

Operating Modes of VRF Systems in HVAC Engineering

Mechanical Engineering Requirements

Variable Refrigerant Flow (VRF) is an HVAC engineering (air conditioning) technology that achieves an extremely high efficiency by varying the flow of refrigerant to indoor units, based on the exact demand of each individual area. This ability to control the flow of refrigerant makes VRF systems ideal for applications with varying loads. In addition, VRF systems can also provide space heating, consolidating two building systems in one and saving space.

VRF technology is available in two versions – heat pump systems and heat recovery systems. Heat pump VRF systems can either cool or heat the entire building but cannot perform both functions at the same time. Heat recovery systems do not have this limitation and can serve simultaneous heating and cooling loads, thus leading to 3 different modes of operation:

  • Cooling mode
  • Heating mode
  • Simultaneous cooling & heating, or heat recovery mode

VRF Systems in Cooling Mode

In cooling mode, VRF operation is not very different from that of an air conditioning system: indoor units are supplied with liquid refrigerant, and an expansion valve inside each unit controls the amount of refrigerant flowing through. When refrigerant enters the cooling coil, it undergoes evaporation, removing heat from indoor air and thereby cooling the room. The heat extracted from indoor spaces is then rejected outdoors.

VRF systems are much more efficient than conventional packaged rooftop units (RTU), packaged terminal air conditioners (PTAC) and window units, according to HVAC engineering experts. Ductless mini-split systems and water-cooled chillers offer a similar efficiency in cooling mode but are unable to operate in heating mode.

VRF Systems in Heating Mode

Unlike cooling mode, where indoor units receive liquid refrigerant, here they are supplied with hot gas refrigerant. Gas flow to individual units is controlled with the same electronic expansion valves used for cooling mode, and the heating effect occurs when hot gas undergoes condensation.

The basic principle is still the refrigeration cycle, with the difference that heat is absorbed from outdoors and rejected indoors; in simple terms it is like air-conditioning the cooler outdoor environment to remove heat from it and use it indoors. This operating mode change is made possible with special 4-way reversing valves, which exchange the roles of evaporator and condenser between indoor and outdoor units.

In heating mode, the electric power consumed becomes useful heat, while in cooling mode it is rejected outdoors. Thus, a VRF outdoor unit can operate above 100% of its rated capacity when in heating mode. However, it is also important to note that the capacity may be derated, especially when the system is subject to a large variation in outdoor conditions. Longer piping lengths, longer distances between the outdoor unit and the last indoor unit, and higher vertical separation are some other causes of derating.

VRF Systems in Heat Recovery Mode

A heat recovery system is ideal when simultaneous heating and cooling are required. The greatest efficiency is achieved when the heating and cooling loads are equal, by maximizing the amount of energy transferred from one zone to another using the refrigerant. Heat rejection from cooling spaces can be utilized for space heating in the areas that need it at the same time. Thanks to this configuration, each occupant is free to choose either cooling or heating mode.

Heat recovery systems are very useful when a building has an east-west or south-north orientation with glass façades. East-west and south-north orientations cause a large difference in load requirements for each direction during the morning and evening, providing a chance for the VRF system to operate in simultaneous heating and cooling mode. Heat recovery is particularly useful in buildings with electrical rooms or data centers that need permanent cooling, since they also become a constant source of heat.

Heat Recovery System Piping Configurations in HVAC Engineering

Heat recovery systems come in 2-pipe and 3-pipe configurations, where the 2-pipe system is the option requiring the highest refrigerant flow. To operate with reduced flow, the 3-pipe system has a liquid line, a high-pressure gas line and a low-pressure gas line. The control function is achieved with a Mode Change Unit (MCU) or Mode Selection Box, which has three headers for high-pressure gas, low-pressure gas, and liquid.

  • When there are zones that need space heating, their indoor units work like condensers, supplying heat from the condensation of high-pressure refrigerant gas. After heating, the saturated refrigerant is fed to the liquid header.
  • Liquid refrigerant is then supplied to the units in space cooling mode, where it evaporates and absorbs heat, becoming a low-pressure gas.
  • The low-pressure gas is returned to its respective header and then to the compressor, repeating the cycle.

In this case, the outdoor unit must only provide the balance between heating and cooling – the one that is higher will determine the operating mode of the outdoor unit.

  • If cooling load is higher, the outdoor unit operates as a condenser, rejecting the surplus heat outdoors.
  • If the heating load is higher, the outdoor units operates as an evaporator, drawing from outdoor air the extra heat needed inside.

The best recommendation is locate the MCU in a public access area such as a corridor, thus minimizing noise and disruption for the end user. Maintenance of heat recovery systems is relatively easy, since the outdoor condenser unit is only connected to the MCU, facilitating system separation into upstream and downstream portions.

As per ASHRAE Standard 34-2013, the refrigerant concentration limit (RCL) is 26 lb per 1,000 ft3 of room volume for occupied spaces, and 13 lb per 1,000 ft3 for institutional buildings. This can be easily achieved by locating the units outside of compact rooms. According to Standard 15, a VRF system is classified as a direct system/high-probability system where a refrigerant leak can potentially enter occupied space.

The use of heat recovery systems in VRF proves to be better option, economically and environmentally, in these types of HVAC engineering systems. This spares the building owners from having to install and service two separate systems, while achieving a very high efficiency. With separate systems for space heating and cooling it is impossible to boost efficiency by exchanging heat, even if both systems are very efficient separately.

Top searches related to Protection Engineer in Bolingbrook

MEP Consulting Engineers

Fire Protection Engineering Bolingbrook

Fire Sprinkler Engineer in Bolingbrook If you're looking for a fast responding Fire Sprinkler Systems Design Services in or near Bolingbrook Illinois? Your best bet is to reach out to is New York Engineers. Not only for Fire Protection Company but also Construction Engineering and HVAC Engineering in Chicago. Call us at (+1) (312) 767-6877 For sometime now if you solicit any contractor or builder form Cabrini Green Chicago to South [...]

2018-11-15T15:27:14+00:00