Fire Protection Engineer in Chatham Chicago

Contact Us!

In search of the top Fire Sprinkler Plumbing Design Experts in Chatham Chicago Illinois? The one to go to is NY-Engineers.Com. Not only for Commercial & Residential Fire Sprinkler Systems Design but also Architectural Engineering and HVAC Chicago. Call us at (+1) 312 767.6877

Contact Us!
Fire Protection Engineering Jobs

If you approach any contractor or building owner anywhere from Lake View East Chicago to River Grove Chicago, and have them recommend you a affordable HVAC Engineering in Chicago, and the answer you will likely get is go to NY Engineers. What is not very well known is that NY Engineers also your top choice for anyone looking for a fire sprinkler engineering in Chatham Chicago. The reality is there is no shortage of HVAC engineering or protection engineering companies in Chatham Chicago. However, when it comes to meeting deadlines is always best to choose a company like NY Engineers.

When you’re willing to plan the erecting of a building, the first professionals you should check with is named a fire protection engineer. These are typically individuals that are well aware of design safeguards and threats that should be well-thought-out. They are able to assist with the look of any building, making sure you will probably have the cabability of control, as well as avoid, fires that might be catastrophic. They frequently work together with building owners, architects, and developers that are responsible for the making of a whole new building or home. There are many reasons for employing a fire protection engineer that you should consider.

Good reasons to hire one of these brilliant professionals – There are 2 premiere factors behind working with a fire protection engineer. First of all, you must ensure that the wellbeing of everyone that can ultimately be at that house frequently. Secondly, it is very important to have as many possible possible protections in position just in case a fire occurs. Anything that they advise will be respected by investors, and then integrated into the actual building. If getting a fire protection engineer is the next step in your project, it is possible to find many of them that will help you.

What Exactly Is The Meaning Of Fire Protection Engineer in Chatham Chicago?

The meaning of fire protection engineer refers to the study of fire pertaining to our built-up environment and exactly how architectural design effects the causes and spread of fire. Still, this work of engineering involves using engineering principles (mechanical, chemical, electrical, and civil engineering), physics, material science, chemistry, technology to implement underlying fire suppression system which protects both humans along with the property in question.

In connection with this, fire protection engineering can be a study and field which is associated with saving property and lives from fire way before fire emerges. Fire protection engineers use their experience and knowledge to influence just how the fire suppression system within a building works. To this end, they are going to have a say in the appearance of a building, the materials employed in the construction of the property, as well as the building layout. Essentially, a fire protection engineer can have input with regards to fire detection and suppression technology used.

Their efforts ensure that every time a fire arises, the suppression system functions to control the fire effectively, allowing time for any individual from the building to run to to safety. Moreover, the suppression system they choose should deter the spread of fire, nullifying the potential of the fire spreading even more. There is a great possibility you would like more info about fire sprinkler engineering services in Chatham Chicago by NY-Engineers.Com we invite you to take a look at our Chicago Mechanical Engineering blog.

Latest Sprinkler Engineering Related Article

Mechanical Engineering Design Options to Heat and Cool Residential Buildings

How To Become A Fire Protection Engineer

There is a broad range of mechanical engineering and design options available for meeting the heating and cooling needs of residential buildings. Normally, these systems differ in terms of the medium used to deliver their heating or cooling output.

  • Water Piping: Water source heat pumps, radiators using chillers, cooling towers, and boilers.
  • Air Ducts: Packaged rooftop units, packaged ceiling hung units
  • Refrigerant Lines: Split AC systems, VRF systems
  • Direct: Used by window-type air conditioners and PTAC units, which operatedirectly between indoor and outdoor locations, without ducts.

This article will provide an overview of some of the most common mechanical design options used for indoor residential spaces, as well as the strengths and limitations of each type of system:

Detailing Mechanical Engineering and Design Options

Mechanical Design Option #1: Four-Pipe System with Chiller, Cooling Tower, and Boiler

This mechanical design gets its name from the fact that it has two separate water circuits, one carrying hot water and another carrying chilled water, each with a supply and return pipe. The basic operating principle of four-pipe systems is the following:

  • Cooling is accomplished by a chiller and cooling tower: A chilled water circuit is used to remove heat from indoor spaces, and the cooling tower is used to reject it outdoors. If the chiller’s compressor comes equipped with a variable-speed drive, this system can offer a very high efficiency in cooling mode.
  • Heating efficiency is determined by the type of boiler. In general, gas-fired boilerstend to be more cost-effective than those running on oil or electrical resistance heating.
  • Fan-coil units are equipped with both hot and cold water coils, granting them the flexibility of either mode of operation.

The main advantage of four-pipe systems is their ability to use both modes of operation simultaneously and independently. This can be especially useful if heating and cooling needs are different across building zones, and especially in apartment buildings and multi-family dwellings where preferences and schedules normally vary by occupant. Of course, a four-pipe system is an expensive mechanical engineering system to install due to the presence of three separate water circuits: two for the distribution of cold and hot water, and a third one used by the chiller to reject heat through the cooling tower.

Mechanical Design Option #2: Water-Source Heat Pumps with Cooling Tower and Boiler

A heat pump can be described in simple terms as a reversible air conditioner: it can deliver indoor cooling through the refrigeration cycle, but can also operate in heating mode with a much higher efficiency than most types of boilers, especially electrical resistance boilers.

Due to their reversible operation, water-source heat pumps offer great flexibility in residential buildings. Individual units can be set to operate in different modes, and in combined heating and cooling applications the overall system can be extremely efficient:

  • Heat pumps in cooling mode extract heat from indoor spaces and release it into a common water circuit.
  • Then, heat pumps in heating mode can extract the heat now carried by the water, and release it indoors, as required.

The fact that heat pumps share the same water circuit means that the cooling tower and boiler only have to balance system loads, rather than meeting them fully:

  • If the cooling load is greater than the heating load, the cooling tower only has to reject the heat difference, not the total heat removed from all spaces.
  • The same logic applies if the heating load is higher than the cooling load: the boiler only has to make up for the difference, not the full heating load.
  • If the heating and cooling loads happen to balance each other out, both the cooling tower and boiler can remain off.

A four-pipe system lacks these capabilities: the chiller must assume the full cooling load while the boiler provides the full heating load – all the heat absorbed in the chilled water loop is rejected by the cooling tower, and can’t be used for space heating purposes because water circuits are independent.

HVAC systems based on water-source heat pumps are extremely efficient, although expensive due to the fact that every zone must be equipped with an individual heat pump, in addition to having a common water circuit, a cooling tower, and a boiler.

Mechanical Design Option #3: VRF System with Rooftop Condensers & Gas Boiler

VRF stands for variable refrigerant flow, and VRF systems get their name from the fact that refrigerant is used to transport heat instead of water:

  • One or more remotely located condensers provide a flow of refrigerant for multiple indoor fan-coils, and a variable speed drive is used to regulate flow according to load. The units can also provide their own heating.
  • For supplementary heating, a gas-fired boiler with perimeter radiation can be added to the system.
  • Two-pipe VRF systems require all fan-coils to operate in the same mode, but with three-pipe systems, it is possible to provide simultaneous heating and cooling for different areas of the building.

Other than operational flexibility, an advantage of this mechanical design option is their ease of installation: refrigerant lines are more compact than water piping and air ducts. These systems still have a relatively small market share in the USA, but are very common in Japan, where they were developed, and Europe. According to ASHRAE, VRF systems tend to have a comparable cost to that of chiller-based systems, potentially higher if the technology must be imported.

The modular nature of VRF systems is another strong point in favor of this technology. If there will be a building expansion, it is possible to expand the system by simply adding a new condenser and the corresponding indoor evaporators.

Mechanical Design Option #4: PTAC Units with Electric Resistance Heating

Packaged terminal air conditioning units (PTAC) are compact systems, very similar to old window-type air conditioners: the system is self-contained and does not require refrigerant lines, water piping, or air ducts, greatly reducing the installed cost. Some PTAC units are equipped with a resistance heater, allowing them to operate in both heating and cooling modes.

PTAC units offer the advantage of being self-contained and independent from each other. This gives them an advantage in projects that will be built in several stages, for example, apartment buildings, since it is possible to expand HVAC capacity as needed without having a common system on which all units depend.

The main limitation of this mechanical system is that they tend to be outclassed by other systems in terms of efficiency, especially when in heating mode. Resistance heating offers a coefficient of performance of 1.0, which means they must draw one watt of electricity per each watt of heating; on the other hand, heat pumps typically operate with a COP of 2.5 or more, or even above 4.0 if a high-efficiency heat pump is selected.

Concluding Remarks

There is a broad range of heating and cooling technologies available for residential buildings, and also a high degree of flexibility in how the overall system can be configured. No system can be considered superior to the rest under all circumstances – every project offers unique conditions that favor some technologies over others.

What kind of mechanical engineering design has worked the best for you? Let us know by commenting below.

Popular searches related to Sprinkler System Engineer in Chatham Chicago

Value Engineering Process Steps

Fire Protection Engineering Chatham Chicago

Fire Sprinkler System Engineering in Chatham Chicago When you're searching for a competent Fire Sprinkler Systems Design Services near Chatham Chicago Illinois? Your best bet is to reach out to is New York Engineers. Not only for Fire Protection Company but also Architectural Engineering and HVAC Chicago. Call us at (312) 767.6877 Nowadays when you ask any general contractor or builder anywhere from Douglas Park Chicago to Pilsen Chicago, about a [...]

2018-11-18T21:25:45+00:00