Fire Sprinkler Design Engineer in Galewood Chicago

Contact Us

Looking for Fire Protection Engineer in Galewood Chicago Illinois? Your best bet is to call is NY-Engineers.Com. Not only for Commercial & Residential Fire Sprinkler Systems Design but also Electrical Engineering and HVAC Firms near Chicago. Call us at (+1) 312 767.6877

Contact Us
Importance Of Value Engineering

Ask any contracting company or building management company anywhere from East Beverly to River Forest, and have them refer you a affordable Electrical Engineering in Chicago, and most the common answer will be go to NY-Engineers.Com. What’s not very well known is that NY Engineers also your top choice for anyone looking for a fire sprinkler engineer in Galewood Chicago. To be honest there is no shortage of mechanical engineering or sprinkler engineering firms in Galewood Chicago. However, when it comes to meeting deadlines is always best to choose a company like NY-Engineers.Com.

In case you are prepared to plan the construction of a building, one of the first professionals who you must consult with is a fire protection engineer. They are individuals that are knowledgeable about design safeguards and threats that need to be well-thought-out. They are able to assist with the design of any building, ensuring you will have the ability to control, as well as prevent, fires that might be catastrophic. They generally work together with building owners, architects, and developers that are responsible for the making of a new building or home. Plenty good reason exist for working with a fire protection engineer that you must consider.

Why you need to hire one of these experts – There are two premiere factors behind getting a fire protection engineer. First of all, you must make sure the care of everyone which will sooner or later be present at that edifice regularly. Secondly, you should have several likely protections in position in the event that a fire occurs. Precisely what they recommend will likely be counted on contractors, and then integrated into the particular building. If choosing a fire protection engineer is the next step of your project, you can actually find many of them which will help you out.

Just What’s The Concept Of Fire Protection Engineer in Galewood Chicago?

The concept of fire protection engineer is just the study of fire in terms of our built-up environment and the way architectural design effects the causes and spread of fire. Moreover, this task of engineering has to do with utilizing engineering principles (mechanical, chemical, electrical, and civil engineering), chemistry, physics, material science, technology to implement underlying fire subdual system which safeguards both humans along with the property involved.

In this connection, fire protection engineering is a study and field that is associated with saving lives and property from disaster way before fire emerges. Fire protection engineers apply their skill to influence just how the fire suppression system within a building works. For this end, they are going to have a say in the design of a building, the types of materials used in the building of the building, and also the building layout. Essentially, a fire protection engineer may have input regarding fire discovery and suppression technology used.

Their efforts ensure that when a fire arises, the suppression system works to suppress the fire effectively, and give time for everyone in the building to get to safety. Moreover, the suppression system that is choosen should hinder the spread of fire, negating the chance of the fire spreading even more. There is a great possibility you would like more details on fire sprinkler system engineer services in Galewood Chicago by New York Engineers we invite you to visit at our Chicago Electrical Engineering blog.

Electrical Engineering Related Blog Article

Advantages of Electronically Commutated Motors in Electrical Engineering

MEP Engineering Pdf

Electronically commutated motors (ECMs) can achieve significant energy savings in electrical engineering applications where fractional horsepower is required. Although NEMA Premium Efficiency motors with variable-frequency drives provide the most efficient solution to drive equipment above 1 hp, induction motors are outclassed by ECMs as the rated horsepower is reduced.

What is an Electronically Commutated Motor?

Although ECMs are designed to run with an AC power supply, it is important to note they are actually direct-current motors with permanent magnets on their rotor. Unlike conventional DC motors, which create a rotating magnetic field with a combination of brush contacts and slip rings, ECMs achieve the same effect with a voltage rectifier and an electronic control circuit. As a result, the friction and sparks associated with brush contacts are eliminated, and this is one of the reasons why ECMs are so efficient. They also have a longer service life than brushed motors, since the wear associated with sparks and friction is eliminated. Compared with other common types of fractional horsepower motors, ECMs are the top choice in terms of efficiency:

  • Shaded-pole motors are very common and more affordable, but their efficiency is very poor, going below 20% in some cases.
  • Permanent-split capacitor (PSC) motors have an average efficiency of 40%, which means they outclass shaded-pole motors. In terms of efficiency, they are an intermediate option between shaded-pole motors and ECMs.
  • ECM efficiency is normally above 60%, which means they consume one-third of the energy used by shaded-pole motors on average.

ECMs can also be manufactured with built-in speed control circuits, allowing them to operate at reduced speed without relying on an external VFD. It is also important to note that ECMs do not suffer a drastic reduction in their efficiency when operating below rated RPM. Fixed-speed ECMs are also available for applications where speed control is not necessary.

Electronically Commutated Motors in Electrical Engineering Applications

ECMs are normally the most efficient option in fractional horsepower applications, but they tend to deliver the highest savings when used in air-conditioning and refrigeration systems. Being more efficient that shaded-pole and PSC motors, they also dissipate less heat, and the reduced heating effect helps AC and refrigeration systems operate more efficiently. This effect applies for all air-conditioning or refrigeration components that are found inside the conditioned space, such as air handlers and evaporators.

As an example, assume a cold-storage room has an evaporator unit with five shaded-pole motors, consuming 900W each. They are replaced with ECMs that only consume 300 W each.

  • 600 W are saved per motor, for a total of 3,000 W.
  • However, these 3,000 W are also subtracted from the refrigeration load. If the system operates with a coefficient of performance of 3, an extra 1,000 W of electric power are saved.
  • In other words, this upgrade saves 3 kW in motor power and 1 kW thanks to refrigeration load reduction.

Keep in mind this is just a simple example, and each electrical engineering project requires a detailed analysis to know the exact savings. However, the heating reduction benefit applies for all cases where ECM motors are deployed in air-conditioned or refrigerated locations.

The brushless design of ECMs makes them quieter than their less efficient counterparts, which also provides a comfort advantage. In business applications, the silent operation of ECMs helps employees concentrate better. ECMs are also lighter than other types of fractional horsepower motors, which makes them easier to install.

Electronically Commutated Motors in Ventilation Systems

As previously stated, shaded-pole and PSC motors are inefficient. Also, three-phase motors with VFDs are impractical for fractional horsepower applications, unable to offer the efficiency that characterizes them in larger systems. Ventilation systems represent an excellent opportunity to deploy ECMs, for two main reasons:

  • Fans with fractional horsepower are common, which means they are often driven by shaded-pole or PSC motors.
  • Many fans have intermittent operation, which represents a chance to use ECMs running at reduced speed. For example, running a fan 80% of the time saves 20% of the energy, while running it at 80% speed saves nearly 50%.

ECMs are a highly recommended upgrade for furnace fans, since they can achieve a much more uniform temperature distribution with their speed control, in addition to offering the energy savings that characterize them.

Payback Period of ECM Upgrades

Like with many energy efficiency measures, the financial benefit of an ECM upgrade changes depending on project conditions. The project payback period can only be calculated with precision after a detailed analysis by a professional energy consultant, but in general the following results can be expected:

  • Replacing shaded-pole motors normally yields a faster payback period than replacing PSC motors, since the efficiency gain is higher. Of course, there can be exceptions; replacing a PSC motor that is used frequently may yield higher savings than upgrading a shaded-pole motor that is only used moderately.
  • ECMs can also be an attractive option in appliances that require speed control. Other types of motors may suffer a drastic efficiency reduction at partial speed.
  • As previously mentioned, the energy savings are higher when ECMs are deployed in air-conditioned or refrigerated spaces.

The financial return of an ECM upgrade can also be enhanced if there are incentive programs at the project’s location. The incentive is calculated based on yearly energy savings, at a rate of $0.16/kWh.

Conclusion

Electronically-commutated motors (ECMs) can achieve significant energy savings in fractional horsepower applications, especially when they replace shaded-pole motors. However, like with any energy efficiency upgrade, professional guidance is highly recommended when defining the project scope and specifications.

When upgrading to ECMs, the return on investment is higher in some cases, and it others the payback period may be too long to justify the upgrade. Ideally, upgrades should focus on where the highest return is obtained from each dollar spent upfront. Recruit the help of an electrical engineering expertise to help you properly apply the information shared in this article to your project.

searches related to Protection Engineer in Galewood Chicago

Fire Protection Engineering UMD

Fire Protection Engineering Galewood Chicago

Fire Sprinkler Design Engineer in Galewood Chicago When you re searching for a fast responding Fire Protection Engineer in or near Galewood Chicago Illinois? Your best bet is to contact is New York Engineers. Not only for Commercial & Residential Fire Sprinkler Systems Design but also MEP Firms in Chicago and HVAC Engineering in Chicago. Call us at (312) 767-6877 For sometime now when you solicit any general contractor or building [...]

2018-11-23T20:16:31+00:00