Fire Protection Engineering in Glenview

Contact Us!

In search of Fire Sprinkler Systems Design Services in or near Glenview Illinois? The one to go to is New York Engineers. Not only for Fire Protection Contractor but also Mechanical Engineering and HVAC Chicago. Call (+1) 312 767-6877

Contact Us!
Construction Engineering Companies

If you ask any contracting company or builder anywhere from Groveland Park to Nortown, and have them recommend you a affordable Construction Engineering in Chicago, and most the common answer will be contact New York Engineers. What is not very well known is that NY-Engineers.Com also your best bet for anyone looking for a fire protection engineering in Glenview. The reality is there is no shortage of construction engineering or sprinkler design engineering companies in Glenview. However, when it comes to affordability is always best to choose a from like New York Engineers.

If you are able to plan the making of a building, one of the first professionals that you ought to speak with is known as a fire protection engineer. These are persons who are well aware of design safeguards and threats that must be well-thought-out. They might help in the style of any structure, making sure that you may have the capability to control, and also avert, fires that might be tragic. They often times work together with developers, architects, and building owners that are responsible for the construction of a fresh building or home. There are many reasons for working with a fire protection engineer that you need to consider.

Why you should hire one of those experts – There are 2 premiere factors behind working with a fire protection engineer. Firstly, you should ensure the safety of everybody who will sooner or later be present at that edifice consistently. Secondly, you should have several possible safeguards into position in the event that a fire occurs. Exactly what they propose is going to be respected by investors, and subsequently included in the actual structure. If locating a fire protection engineer is the next step of your respective project, you can easily find a number of them that will help you out.

What Exactly Is The Meaning Of Fire Protection Engineer in Glenview?

The concept of fire protection engineer is the study of fire with regards to our built-up environment and the way architectural design influences the reasons and spread of fire. Still, this task of engineering has to do with making use of engineering principles (mechanical, chemical, electrical, and civil engineering), physics, material science, chemistry, technology to execute underlying fire subdual system which safeguards both humans and also the property involved.

In this connection, fire protection engineering is really a study and field that is associated with saving property and lives from fire way before fire emerges. Fire protection engineers use their training to impact the way the fire suppression system in a building happens. To this end, they may have input in the style of a building, the materials utilized in the construction of the building, along with the building layout. Essentially, a fire protection engineer may have input in terms of fire detection and suppression technology used.

Their efforts guarantee that when a fire happens, the suppression system works to suppress the fire effectively, and give time for anybody in the building to run to to safety. Moreover, the suppression system that is choosen should prevent the spread of fire, nullifying the opportunity of the fire spreading even more. Even with all of this information you would like more info on fire sprinkler engineer services in Glenview by NY Engineers you should take a look at our Chicago Utility Filings blog.

Latest Electrical Engineering Related Blog

Operating Modes of VRF Systems in HVAC Engineering

What Do Mechanical Engineers Do

Variable Refrigerant Flow (VRF) is an HVAC engineering (air conditioning) technology that achieves an extremely high efficiency by varying the flow of refrigerant to indoor units, based on the exact demand of each individual area. This ability to control the flow of refrigerant makes VRF systems ideal for applications with varying loads. In addition, VRF systems can also provide space heating, consolidating two building systems in one and saving space.

VRF technology is available in two versions – heat pump systems and heat recovery systems. Heat pump VRF systems can either cool or heat the entire building but cannot perform both functions at the same time. Heat recovery systems do not have this limitation and can serve simultaneous heating and cooling loads, thus leading to 3 different modes of operation:

  • Cooling mode
  • Heating mode
  • Simultaneous cooling & heating, or heat recovery mode

VRF Systems in Cooling Mode

In cooling mode, VRF operation is not very different from that of an air conditioning system: indoor units are supplied with liquid refrigerant, and an expansion valve inside each unit controls the amount of refrigerant flowing through. When refrigerant enters the cooling coil, it undergoes evaporation, removing heat from indoor air and thereby cooling the room. The heat extracted from indoor spaces is then rejected outdoors.

VRF systems are much more efficient than conventional packaged rooftop units (RTU), packaged terminal air conditioners (PTAC) and window units, according to HVAC engineering experts. Ductless mini-split systems and water-cooled chillers offer a similar efficiency in cooling mode but are unable to operate in heating mode.

VRF Systems in Heating Mode

Unlike cooling mode, where indoor units receive liquid refrigerant, here they are supplied with hot gas refrigerant. Gas flow to individual units is controlled with the same electronic expansion valves used for cooling mode, and the heating effect occurs when hot gas undergoes condensation.

The basic principle is still the refrigeration cycle, with the difference that heat is absorbed from outdoors and rejected indoors; in simple terms it is like air-conditioning the cooler outdoor environment to remove heat from it and use it indoors. This operating mode change is made possible with special 4-way reversing valves, which exchange the roles of evaporator and condenser between indoor and outdoor units.

In heating mode, the electric power consumed becomes useful heat, while in cooling mode it is rejected outdoors. Thus, a VRF outdoor unit can operate above 100% of its rated capacity when in heating mode. However, it is also important to note that the capacity may be derated, especially when the system is subject to a large variation in outdoor conditions. Longer piping lengths, longer distances between the outdoor unit and the last indoor unit, and higher vertical separation are some other causes of derating.

VRF Systems in Heat Recovery Mode

A heat recovery system is ideal when simultaneous heating and cooling are required. The greatest efficiency is achieved when the heating and cooling loads are equal, by maximizing the amount of energy transferred from one zone to another using the refrigerant. Heat rejection from cooling spaces can be utilized for space heating in the areas that need it at the same time. Thanks to this configuration, each occupant is free to choose either cooling or heating mode.

Heat recovery systems are very useful when a building has an east-west or south-north orientation with glass façades. East-west and south-north orientations cause a large difference in load requirements for each direction during the morning and evening, providing a chance for the VRF system to operate in simultaneous heating and cooling mode. Heat recovery is particularly useful in buildings with electrical rooms or data centers that need permanent cooling, since they also become a constant source of heat.

Heat Recovery System Piping Configurations in HVAC Engineering

Heat recovery systems come in 2-pipe and 3-pipe configurations, where the 2-pipe system is the option requiring the highest refrigerant flow. To operate with reduced flow, the 3-pipe system has a liquid line, a high-pressure gas line and a low-pressure gas line. The control function is achieved with a Mode Change Unit (MCU) or Mode Selection Box, which has three headers for high-pressure gas, low-pressure gas, and liquid.

  • When there are zones that need space heating, their indoor units work like condensers, supplying heat from the condensation of high-pressure refrigerant gas. After heating, the saturated refrigerant is fed to the liquid header.
  • Liquid refrigerant is then supplied to the units in space cooling mode, where it evaporates and absorbs heat, becoming a low-pressure gas.
  • The low-pressure gas is returned to its respective header and then to the compressor, repeating the cycle.

In this case, the outdoor unit must only provide the balance between heating and cooling – the one that is higher will determine the operating mode of the outdoor unit.

  • If cooling load is higher, the outdoor unit operates as a condenser, rejecting the surplus heat outdoors.
  • If the heating load is higher, the outdoor units operates as an evaporator, drawing from outdoor air the extra heat needed inside.

The best recommendation is locate the MCU in a public access area such as a corridor, thus minimizing noise and disruption for the end user. Maintenance of heat recovery systems is relatively easy, since the outdoor condenser unit is only connected to the MCU, facilitating system separation into upstream and downstream portions.

As per ASHRAE Standard 34-2013, the refrigerant concentration limit (RCL) is 26 lb per 1,000 ft3 of room volume for occupied spaces, and 13 lb per 1,000 ft3 for institutional buildings. This can be easily achieved by locating the units outside of compact rooms. According to Standard 15, a VRF system is classified as a direct system/high-probability system where a refrigerant leak can potentially enter occupied space.

The use of heat recovery systems in VRF proves to be better option, economically and environmentally, in these types of HVAC engineering systems. This spares the building owners from having to install and service two separate systems, while achieving a very high efficiency. With separate systems for space heating and cooling it is impossible to boost efficiency by exchanging heat, even if both systems are very efficient separately.

Common searches related to Sprinkler Design Engineering in Glenview

HVAC Mechanical Engineer

Fire Protection Engineering Glenview

Fire Sprinkler System Engineer in Glenview If you re looking for a competent Fire Protection Engineering near Glenview Illinois? Your best bet is to call is NY-Engineers.Com. Not only for Fire Sprinkler Systems Design Services but also Architectural Engineering and HVAC Engineering in Chicago. Call us at (312) 767.6877 Nowadays if you solicit any contracting company or building management company form Buena Park Chicago to Oriole Park Chicago, about a dependable [...]

2018-11-10T21:30:35+00:00