Fire Sprinkler Engineering in Pill Hill Chicago

Contact Us!

Searching for the best Fire Sprinkler Plumbing Design Experts in or near Pill Hill Chicago Illinois? Your best bet is to contact is New York Engineers. Not only for Fire Sprinkler Plumbing Design Experts but also MEP Engineering in Chicago and HVAC Firms near Chicago. Call (312) 767.6877

Contact Us!
Importance Of Value Engineering

Solicit any contractor or building owner form Chinatown to Ranch Triangle Chicago, and have them refer you a dependable Architectural Engineering in Chicago, and the answer you will likely get is call NY-Engineers.Com. What is not commonly known is that NY Engineers also your best option for anyone looking for a fire sprinkler engineer in Pill Hill Chicago. To be honest there is no shortage of HVAC engineering or sprinkler engineering firms in Pill Hill Chicago. However, when it comes to meeting deadlines is always best to choose a from like New York Engineers.

In case you are ready to plan the erecting of a building, one of the first professionals that you should check with is known as a fire protection engineer. These are generally individuals who are well aware of design protections and risks that must be considered. They might help in the design of any structure, ensuring you will have the cabability of control, as well as avert, fires that could be catastrophic. They often times work with developers, architects, and building owners that are responsible for the construction of a fresh home or building. There are several reasons for employing a fire protection engineer that you ought to consider.

Why you ought to hire one of those experts – There are 2 main reasons for employing a fire protection engineer. To start with, you need to guarantee the care of everyone that may eventually be present at that edifice on a regular basis. Finally, you should have as many possible likely safeguards into position just in case a fire breakout. Anything that they recommend will be counted on developers, and subsequently included in the particular building. If choosing a fire protection engineer is the next stage in your project, it is possible to find a number of them which can help you.

Just What Is The Meaning Of Fire Protection Engineer in Pill Hill Chicago?

The concept of fire protection engineer is just the study of fire with regards to our built-up environment and exactly how architectural design influences the causes and spread of fire. Moreover, this work of engineering involves using engineering principles (mechanical, chemical, electrical, and civil engineering), chemistry, physics, material science, technology to execute underlying fire suppression system which safeguards both humans and the property in question.

In this connection, fire protection engineering is really a study and field which is involved in saving lives and property from fire way before fire emerges. Fire protection engineers use their training to impact just how the fire suppression system inside a building works. To this particular end, they will likely have a say in the design of a building, the types of materials used in the building of the construction, along with the building layout. Importantly, a fire protection engineer can have input regarding fire discovery and suppression method used.

Their efforts ensure that when a fire happens, the suppression system operates to suppress the fire effectively, and give time for any individual within the building to escape to safety. Furthermore, the suppression system they choose should deter the spread of fire, negating the opportunity of the fire spreading a lot more. There is a great possibility you would like additional information on fire sprinkler engineering services in Pill Hill Chicago by NY Engineers we invite you to take a look at our blog.

Mechanical Engineering Related Post

How Mechanical Engineers Compare Operating Expenses of Different Water Heater Models

HVAC Engineering

One of the key characteristics to consider when deciding between several water heater options is the operating cost; the heater with the lowest price tag is not necessarily the least expensive to own in the long term. Operating cost is determined in great part by equipment efficiency, but there are other equally important factors that mechanical engineers want you to consider:

  • Energy sources have different unit prices. In the case of heating systems, the input is generally electricity, natural gas, propane or fuel oil. There are also zero-cost energy sources, such as geothermal energy and sunlight.
  • Operating schedules may vary depending on the type of heater. Rated power is not the only factor that determines total energy consumption; the operating schedule must also be considered. For example, tankless water heaters have a high rated power but operate in short bursts, saving energy compared to a storage heater that draws less power but operates continuously, assuming the energy source is the same.

This article will provide a guide for calculating and comparing operating expenses with different types of heaters. After these values are calculated, they can be weighed against the upfront cost of each heating system to find the most cost-effective option.

As with any investment in equipment, considering the total ownership cost is very important when purchasing a heater: to calculate the real heating cost per BTU or kWh produced, it is necessary to factor in the initial investment and any maintenance or reparation expenses. For instance, saying that solar heating is free would not be completely true; although the energy input is free, there are equipment and installation costs, and in multistory buildings a small pump may be required for water to reach the rooftop.

Energy Factor: How Mechanical Engineers Calculate Heating Expenses

The energy factor (EF) is the ratio of heating output to energy input offered by a heating system. It considers how effectively the heater converts its energy input into an increase in water temperature, but also accounts for other aspects of heater operation:

  • Standby losses – These losses are found in storage heaters, and they represent the heat loss associated with keeping the water in the tank at the desired temperature. Although proper insulation mitigates standby losses, they are impossible to eliminate completely.
  • Cycling losses – These losses occur as water circulates through the heater’s internal piping, and through the storage tank if present.

Heaters running on fossil fuels have energy factors well below unity, electric tankless heaters operate close an EF of 1, and heat pumps have EF values higher than unity because their inverse refrigeration cycle allows them to draw heat from the surrounding environment.

Comparing Water Heaters: An Example

Assume you are presented with four water heaters for a household that consumes 80 million BTU per year, and want to calculate the operating costs associated with each alternative:

  • A gas-fired storage heater with an EF of 0.55
  • A tankless electric heater with an EF of 0.97
  • A tankless gas heater with an EF of 0.80
  • An electric air-source heat pump with an EF of 2.5

Since the example is for one city, assume the cost of natural gas is $1.20 per 100,000 BTU, and the electricity rate is $0.18 per kilowatt-hour.

  • For the gas heaters, the calculation procedure can be carried out directly because the heating output and energy input are both in BTU.
  • The tankless electric heater and heat pump run with electricity, so the heating output must be converted to kWh before proceeding.
  • Heating Output (kWh)=80,000,000 BTU x 1kWh/3412.14 BTU= 23,446 kWh

Other than this, the calculation procedure is the same for all four heaters. The yearly heating output is divided by the energy factor (EF) to calculate yearly energy consumption, and this value is then multiplied by the unit price of energy, per kWh or BTU. This formula is applied by mechanical engineers to all four water heaters, to determine which is the least expensive to operate.

Gas-fired storage heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.55×1.20 USD/100,000 BTU=1745 USD

Tankless electric heater operating cost:
Operating Cost (USD/yr)=23,446 kWh/.97X.18 USD/kWh=4351 USD

Tankless gas heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.8 X 1.20 USD/100,000 BTU=1200 USD

Electric air-source heat pump operating cost:
Operating Cost (USD/yr)=23,446 kWh/2.5 X .18 USD/kWh=1688 USD

Operating Cost Comparison

In this case, the tankless gas heater has the lowest operating cost. The heat pump and gas-fired storage heater follow, although the heat pump wins by a slight margin. The tankless electric heater is the most expensive to operate by far.

Total Cost of Owning and Operating Heaters

For a full evaluation, the upfront cost and service life must be considered as well. For this example, assume the following cost and rated life values:

HeaterInstalled CostService life
Heat Pump$180015
Tankless electric heater$150020
Tankless gas heater$200020
Gas-fired storage heater$120010

For simplicity, the analysis will be limited to upfront and operation costs. The yearly ownership cost of each heater option would be:

  • Heat Pump Cost = $1688/year + ($1800/15 years) = $1808/year
  • Tankless Electric Heater = $4351/year + ($1500/20 years) = $4426/year
  • Tankless Gas Heater = $1200/year + ($2000/20 years) = $1300/year
  • Gas-Fired Storage Heater = $1745/year + ($1200/10 years) = $1865/year

The tankless gas heater is still the winner in this case, despite its higher upfront cost. The heat pump and gas-fired storage heater have a similar cost of ownership, and the tankless electric heater is very expensive to operate due to the high electricity rates of some cities. However, keep in mind this is just an example, and different results may be obtained for different locations.

Concluding Remarks

To determine which type of heater is the best match for your property, getting a professional assessment from one or more mechanical engineers is highly recommended. For example, if you don’t have a chimney, the installation cost of any gas heater will increase significantly. Remember that electricity and gas prices also vary by location, and what is true in one location may not always apply in another city or state.

Top searches related to Sprinkler Design Engineering in Pill Hill Chicago

Top Engineering Firms

Fire Protection Engineering Pill Hill Chicago

Fire Sprinkler Engineer in Pill Hill Chicago When you're looking for a reliable Fire Protection Engineering in or near Pill Hill Chicago Illinois? The one to go to is NY-Engineers.Com. Not only for Commercial & Residential Fire Sprinkler Systems Design but also Electrical Engineering and HVAC Firms near Chicago. Contact us at (+1) 312 767.6877 Today when you ask any contractor or building management company anywhere from Gage Park Chicago to [...]

2018-11-01T09:57:44+00:00