Hiring a HVAC Engineering Contractor in Lincolnwood Chicago

Contact Us!

Searching for a top HVAC Chicago? The one to go to is NY-Engineers.Com. Not only for HVAC Engineering in Chicago but also Electrical Engineering and Sprinkler Engineering throughout Lincolnwood Chicago. Contact us at 312 767.6877

Contact Us!
Electrical Engineering Careers

The majority of construction companies throughout Kingston, NY already know that NY-Engineers.Com is the engineering company to call if you’re looking for Architectural Engineering in NYC. What a lot local building owners have not realized is that New York Engineers is also your best choice if you’re searching for HVAC Engineering services in Lincolnwood Chicago, IL.

Contracting a HVAC Contractor in Lincolnwood Chicago entails the opportunity to research and recognize what’s necessary for your construction. Each individual will probably be different with regards to the signing process and it is better to look at these attributes.

1) Expertise: An excellent company will invariably have skilled professionals on the team to help with HVAC requirements. They aren’t just qualified but are going to have a number of know-how in the marketplace. This keeps things simple, streamlined, and as efficient as you want them to be. Clients should be confident with a specialist available to help.

2) Range of employment: Check out their background to see how they have done before. This can help make clear whether or not the firm is really a passionate team who has great outcomes. If you find issues with their portfolio then It is planning to sort into your put in place. Center on this as soon as possible!

Here are the strategies for employing a top-tier organization and making sure the perfect solution meets the proper standards. If not, the company could find themselves causing more problems than answers. Start out with these pointers and write a short checklist to have the procedure easier.

For this reason a lot of engineers are brought on as consultants while they get skilled. There, they might be only responsible for the next step of the design and might provide insight about what works or what does not.  Most HVAC systems are begun by using an Lincolnwood Chicago HVAC design engineer.

Key HVAC Design Engineer Duties

An HVAC engineer in Lincolnwood Chicago will be given a list of assorted duties depending on the firm, its requirements, and how the assignment grows.

Generally, the HVAC design engineer duties are going to contain a lot of tasks including inventing different HVAC systems. Every task will be unique as customers come in with tailored requests. These requests could include the dimesions of their system, how it is going to operate, and the performance metrics they’re after with a new HVAC system.

A qualified Lincolnwood Chicago HVAC engineer will sit back, grasp these needs, and map out a complete HVAC system using high-quality design instruments. Things are taken into account within this time and that is what an HVAC design engineer is expected to do. Along with designing the HVAC system, the engineer has to be certain the mechanism is performed correctly and fits in accordance with just what the requester is after.

That is why many engineers are brought on as consultants while they gain practice. Then, they are only responsible for the following step of the design process and will show understanding about what works or what does not.  Most HVAC systems are creaded by using an HVAC design engineer in Lincolnwood Chicago. Even with all of this information you would like more information on the HVAC Engineering services in Lincolnwood Chicago, Illinois by NY Engineers we invite you to visit at our blog.

New Fire Protection Engineering Related Article

Mechanical Engineering Design Options to Heat and Cool Residential Buildings

Construction Engineers Near Me

There is a broad range of mechanical engineering and design options available for meeting the heating and cooling needs of residential buildings. Normally, these systems differ in terms of the medium used to deliver their heating or cooling output.

  • Water Piping: Water source heat pumps, radiators using chillers, cooling towers, and boilers.
  • Air Ducts: Packaged rooftop units, packaged ceiling hung units
  • Refrigerant Lines: Split AC systems, VRF systems
  • Direct: Used by window-type air conditioners and PTAC units, which operatedirectly between indoor and outdoor locations, without ducts.

This article will provide an overview of some of the most common mechanical design options used for indoor residential spaces, as well as the strengths and limitations of each type of system:

Detailing Mechanical Engineering and Design Options

Mechanical Design Option #1: Four-Pipe System with Chiller, Cooling Tower, and Boiler

This mechanical design gets its name from the fact that it has two separate water circuits, one carrying hot water and another carrying chilled water, each with a supply and return pipe. The basic operating principle of four-pipe systems is the following:

  • Cooling is accomplished by a chiller and cooling tower: A chilled water circuit is used to remove heat from indoor spaces, and the cooling tower is used to reject it outdoors. If the chiller’s compressor comes equipped with a variable-speed drive, this system can offer a very high efficiency in cooling mode.
  • Heating efficiency is determined by the type of boiler. In general, gas-fired boilerstend to be more cost-effective than those running on oil or electrical resistance heating.
  • Fan-coil units are equipped with both hot and cold water coils, granting them the flexibility of either mode of operation.

The main advantage of four-pipe systems is their ability to use both modes of operation simultaneously and independently. This can be especially useful if heating and cooling needs are different across building zones, and especially in apartment buildings and multi-family dwellings where preferences and schedules normally vary by occupant. Of course, a four-pipe system is an expensive mechanical engineering system to install due to the presence of three separate water circuits: two for the distribution of cold and hot water, and a third one used by the chiller to reject heat through the cooling tower.

Mechanical Design Option #2: Water-Source Heat Pumps with Cooling Tower and Boiler

A heat pump can be described in simple terms as a reversible air conditioner: it can deliver indoor cooling through the refrigeration cycle, but can also operate in heating mode with a much higher efficiency than most types of boilers, especially electrical resistance boilers.

Due to their reversible operation, water-source heat pumps offer great flexibility in residential buildings. Individual units can be set to operate in different modes, and in combined heating and cooling applications the overall system can be extremely efficient:

  • Heat pumps in cooling mode extract heat from indoor spaces and release it into a common water circuit.
  • Then, heat pumps in heating mode can extract the heat now carried by the water, and release it indoors, as required.

The fact that heat pumps share the same water circuit means that the cooling tower and boiler only have to balance system loads, rather than meeting them fully:

  • If the cooling load is greater than the heating load, the cooling tower only has to reject the heat difference, not the total heat removed from all spaces.
  • The same logic applies if the heating load is higher than the cooling load: the boiler only has to make up for the difference, not the full heating load.
  • If the heating and cooling loads happen to balance each other out, both the cooling tower and boiler can remain off.

A four-pipe system lacks these capabilities: the chiller must assume the full cooling load while the boiler provides the full heating load – all the heat absorbed in the chilled water loop is rejected by the cooling tower, and can’t be used for space heating purposes because water circuits are independent.

HVAC systems based on water-source heat pumps are extremely efficient, although expensive due to the fact that every zone must be equipped with an individual heat pump, in addition to having a common water circuit, a cooling tower, and a boiler.

Mechanical Design Option #3: VRF System with Rooftop Condensers & Gas Boiler

VRF stands for variable refrigerant flow, and VRF systems get their name from the fact that refrigerant is used to transport heat instead of water:

  • One or more remotely located condensers provide a flow of refrigerant for multiple indoor fan-coils, and a variable speed drive is used to regulate flow according to load. The units can also provide their own heating.
  • For supplementary heating, a gas-fired boiler with perimeter radiation can be added to the system.
  • Two-pipe VRF systems require all fan-coils to operate in the same mode, but with three-pipe systems, it is possible to provide simultaneous heating and cooling for different areas of the building.

Other than operational flexibility, an advantage of this mechanical design option is their ease of installation: refrigerant lines are more compact than water piping and air ducts. These systems still have a relatively small market share in the USA, but are very common in Japan, where they were developed, and Europe. According to ASHRAE, VRF systems tend to have a comparable cost to that of chiller-based systems, potentially higher if the technology must be imported.

The modular nature of VRF systems is another strong point in favor of this technology. If there will be a building expansion, it is possible to expand the system by simply adding a new condenser and the corresponding indoor evaporators.

Mechanical Design Option #4: PTAC Units with Electric Resistance Heating

Packaged terminal air conditioning units (PTAC) are compact systems, very similar to old window-type air conditioners: the system is self-contained and does not require refrigerant lines, water piping, or air ducts, greatly reducing the installed cost. Some PTAC units are equipped with a resistance heater, allowing them to operate in both heating and cooling modes.

PTAC units offer the advantage of being self-contained and independent from each other. This gives them an advantage in projects that will be built in several stages, for example, apartment buildings, since it is possible to expand HVAC capacity as needed without having a common system on which all units depend.

The main limitation of this mechanical system is that they tend to be outclassed by other systems in terms of efficiency, especially when in heating mode. Resistance heating offers a coefficient of performance of 1.0, which means they must draw one watt of electricity per each watt of heating; on the other hand, heat pumps typically operate with a COP of 2.5 or more, or even above 4.0 if a high-efficiency heat pump is selected.

Concluding Remarks

There is a broad range of heating and cooling technologies available for residential buildings, and also a high degree of flexibility in how the overall system can be configured. No system can be considered superior to the rest under all circumstances – every project offers unique conditions that favor some technologies over others.

What kind of mechanical engineering design has worked the best for you? Let us know by commenting below.

Popular Searches Related to HVAC Engineering in Lincolnwood Chicago, Illinois.

MEP Engineering Courses

HVAC Engineering Lincolnwood Chicago, IL

What Can Our HVAC Engineers in Lincolnwood Chicago Do For You? If you re searching for a dependable HVAC Engineering in Chicago? Your best bet is to call is NY-Engineers.Com. Not only for HVAC Chicago but also Electrical Engineering and Sprinkler Engineering throughout Lincolnwood Chicago. Contact us at (312) 767.6877 Since coming to market the majority of construction companies throughout Holbrook, NY already know that NY-Engineers.Com is the engineering firm to [...]

2018-10-19T23:14:04+00:00