Hiring a HVAC Engineering Firm in Near South Side Chicago

Contact Us

In search of HVAC Engineering in Chicago? The one to go to is New York Engineers. Not only for HVAC Chicago but also Value Engineering and Protection Engineering in Near South Side Chicago. Call (312) 767.6877

Contact Us
How To Become An HVAC Engineer

The majority of property owners throughout Buffalo, New York already know that New York Engineers is the engineering company to contact if you are searching for Architectural Engineering in New York. What a lot local building owners have not realized is that NY-Engineers.Com is also your best choice if you are looking for HVAC Engineering services in Near South Side Chicago, IL.

Acquiring a HVAC Company in Near South Side Chicago involves the opportunity to research and recognize what’s necessary for your construction. Each person will be altered with regards to the employing procedure and it’s better to look at the following qualities.

1) Expertise: An effective company will always have skilled staff onboard to assist with HVAC needs. They are not simply trained but are going to have a number of expertise in the business. This keeps everything simple, streamlined, and as well-organized as you require them to be. Patrons should feel confident with a specialist on hand to assist.

2) Range of work: Take a look at their track record to note exactly how they’ve done before. It could help make clear if the business is a avid team that achieves great outcomes. If there are difficulties with their portfolio then It is gonna filter into your create. Center on this as quickly as possible!

Those characterize the methods for getting a top-tier firm and ensuring that the answer is up to scratch. Or else, the firm can wind up causing more problems than solutions. Start out with the following tips and prepare a short checklist to make the process easier.

That is why many engineers are brought on as consultants while they gain practice. That is when, they might be only accountable for the following step of the design and might give insight of what works or what does not.  Most HVAC systems are begun with the aid of an Near South Side Chicago HVAC design engineer.

Key HVAC Design Engineer Responsibilities

An HVAC design engineer in Near South Side Chicago is usually given a list of assorted responsibilities dependant upon the firm, its needs, and exactly how the assignment grows.

On the whole, the HVAC design engineer tasks are going to contain a number of chores including fabricating various HVAC systems. All duty will probably be exclusive since patrons bring tailored needs. These bids can include the size of their system, how it is going to function, and the performance metrics they’re after with a brand new HVAC system.

A qualified Near South Side Chicago HVAC engineer will almost certainly sit down, recognize these needs, and pre-plan a whole HVAC system with high-quality design devices. Everything is considered throughout this time and that is what HVAC design engineers are relied on to perform. Together with creating the HVAC system, the engineer has to make sure the installation is performed correctly and fits in line with exactly what the client needs.

This is the reason a lot of engineers are employed as consultants as they get practice. Then, they are only accountable for the next step in the process and would show understanding on what works or what does not.  Most HVAC systems are established with the help of an HVAC design engineer in Near South Side Chicago. There is only so much you can save this page if you would like more information about the HVAC Engineering services in Near South Side Chicago, IL by NY-Engineers.Com you should stop by at our blog.

Latest Utility Filings Related Post

How Mechanical Engineers Compare Operating Expenses of Different Water Heater Models

Value Engineering Techniques

One of the key characteristics to consider when deciding between several water heater options is the operating cost; the heater with the lowest price tag is not necessarily the least expensive to own in the long term. Operating cost is determined in great part by equipment efficiency, but there are other equally important factors that mechanical engineers want you to consider:

  • Energy sources have different unit prices. In the case of heating systems, the input is generally electricity, natural gas, propane or fuel oil. There are also zero-cost energy sources, such as geothermal energy and sunlight.
  • Operating schedules may vary depending on the type of heater. Rated power is not the only factor that determines total energy consumption; the operating schedule must also be considered. For example, tankless water heaters have a high rated power but operate in short bursts, saving energy compared to a storage heater that draws less power but operates continuously, assuming the energy source is the same.

This article will provide a guide for calculating and comparing operating expenses with different types of heaters. After these values are calculated, they can be weighed against the upfront cost of each heating system to find the most cost-effective option.

As with any investment in equipment, considering the total ownership cost is very important when purchasing a heater: to calculate the real heating cost per BTU or kWh produced, it is necessary to factor in the initial investment and any maintenance or reparation expenses. For instance, saying that solar heating is free would not be completely true; although the energy input is free, there are equipment and installation costs, and in multistory buildings a small pump may be required for water to reach the rooftop.

Energy Factor: How Mechanical Engineers Calculate Heating Expenses

The energy factor (EF) is the ratio of heating output to energy input offered by a heating system. It considers how effectively the heater converts its energy input into an increase in water temperature, but also accounts for other aspects of heater operation:

  • Standby losses – These losses are found in storage heaters, and they represent the heat loss associated with keeping the water in the tank at the desired temperature. Although proper insulation mitigates standby losses, they are impossible to eliminate completely.
  • Cycling losses – These losses occur as water circulates through the heater’s internal piping, and through the storage tank if present.

Heaters running on fossil fuels have energy factors well below unity, electric tankless heaters operate close an EF of 1, and heat pumps have EF values higher than unity because their inverse refrigeration cycle allows them to draw heat from the surrounding environment.

Comparing Water Heaters: An Example

Assume you are presented with four water heaters for a household that consumes 80 million BTU per year, and want to calculate the operating costs associated with each alternative:

  • A gas-fired storage heater with an EF of 0.55
  • A tankless electric heater with an EF of 0.97
  • A tankless gas heater with an EF of 0.80
  • An electric air-source heat pump with an EF of 2.5

Since the example is for one city, assume the cost of natural gas is $1.20 per 100,000 BTU, and the electricity rate is $0.18 per kilowatt-hour.

  • For the gas heaters, the calculation procedure can be carried out directly because the heating output and energy input are both in BTU.
  • The tankless electric heater and heat pump run with electricity, so the heating output must be converted to kWh before proceeding.
  • Heating Output (kWh)=80,000,000 BTU x 1kWh/3412.14 BTU= 23,446 kWh

Other than this, the calculation procedure is the same for all four heaters. The yearly heating output is divided by the energy factor (EF) to calculate yearly energy consumption, and this value is then multiplied by the unit price of energy, per kWh or BTU. This formula is applied by mechanical engineers to all four water heaters, to determine which is the least expensive to operate.

Gas-fired storage heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.55×1.20 USD/100,000 BTU=1745 USD

Tankless electric heater operating cost:
Operating Cost (USD/yr)=23,446 kWh/.97X.18 USD/kWh=4351 USD

Tankless gas heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.8 X 1.20 USD/100,000 BTU=1200 USD

Electric air-source heat pump operating cost:
Operating Cost (USD/yr)=23,446 kWh/2.5 X .18 USD/kWh=1688 USD

Operating Cost Comparison

In this case, the tankless gas heater has the lowest operating cost. The heat pump and gas-fired storage heater follow, although the heat pump wins by a slight margin. The tankless electric heater is the most expensive to operate by far.

Total Cost of Owning and Operating Heaters

For a full evaluation, the upfront cost and service life must be considered as well. For this example, assume the following cost and rated life values:

HeaterInstalled CostService life
Heat Pump$180015
Tankless electric heater$150020
Tankless gas heater$200020
Gas-fired storage heater$120010

For simplicity, the analysis will be limited to upfront and operation costs. The yearly ownership cost of each heater option would be:

  • Heat Pump Cost = $1688/year + ($1800/15 years) = $1808/year
  • Tankless Electric Heater = $4351/year + ($1500/20 years) = $4426/year
  • Tankless Gas Heater = $1200/year + ($2000/20 years) = $1300/year
  • Gas-Fired Storage Heater = $1745/year + ($1200/10 years) = $1865/year

The tankless gas heater is still the winner in this case, despite its higher upfront cost. The heat pump and gas-fired storage heater have a similar cost of ownership, and the tankless electric heater is very expensive to operate due to the high electricity rates of some cities. However, keep in mind this is just an example, and different results may be obtained for different locations.

Concluding Remarks

To determine which type of heater is the best match for your property, getting a professional assessment from one or more mechanical engineers is highly recommended. For example, if you don’t have a chimney, the installation cost of any gas heater will increase significantly. Remember that electricity and gas prices also vary by location, and what is true in one location may not always apply in another city or state.

Common Searches Related to HVAC Engineering in Near South Side Chicago, IL.

HVAC Engineering Companies

HVAC Engineering Near South Side Chicago, IL

What Can Our HVAC Engineers in Near South Side Chicago Do For You? When you're looking for a reliable HVAC Chicago? Your best bet is to call is New York Engineers. Not only for HVAC Firms in Chicago but also Mechanical Engineering and Sprinkler System Engineering in or near Near South Side Chicago. Call (312) 767.6877 Over the last decade the majority of property owners throughout Mamaroneck, NY already know that [...]

2018-10-01T22:23:29+00:00