Hiring a HVAC Engineering Company in South Chicago

Value Engineering Examples

Many building owners throughout Glen Cove, New York already know that NY Engineers is the engineering firm to call when you’re searching for MEP Engineering in NY. What a lot local property owners have yet to realized is that NY Engineers is also your best choice if you are searching for HVAC Engineering services in South Chicago, Illinois.

Hiring a HVAC Engineering Contractor in South Chicago involves the ability to examine and understand what is necessary for your construction. Each person is going to be different in relation to the contracting process and it’s better to consider the next merits.

1) Expertise: A good firm will always have trained professionals on the team to assist with HVAC needs. These professionals aren’t just skilled but are going to have several years of skill in the trade. This keeps everything simple, streamlined, and as efficient as you want them to be. Patrons would be more comfortable with a specialist on hand to help.

2) Portfolio of labor: Check out their background to note exactly how they have done before. This can help shed light on whether or not the firm is a passionate team who has good results. If you find issues with their portfolio then it’s gonna filter into the create. Concentrate on this at the earliest opportunity!

Those signify the methods for hiring a top-tier organization and making sure the perfect solution is up to scratch. Or else, the firm can end up creating more problems than answers. Start with these pointers and write a short checklist to have the procedure easier.

For this reason many engineers are employed as consultants because they gain practice. There, they might be only accountable for the next element of the style and will show insight on what works or what doesn’t.  Most HVAC systems are founded by using an South Chicago HVAC design engineer.

Core HVAC Design Engineer Duties

An HVAC design engineer in South Chicago will be granted a checklist of different responsibilities dependant upon the firm, its needs, and just how the assignment unfolds.

On the whole, the HVAC design engineer responsibilities will certainly include a number of tasks including inventing various HVAC systems. Every task will be exclusive because patrons bring tailored needs. These demands might incorporate the size of their system, how it’s going to perform, and the performance metrics they are after with a new HVAC system.

A professional South Chicago HVAC engineer will probably sit down, grasp these needs, and map out a whole HVAC system using high-end design devices. Things are all considered within this time and that’s what an HVAC design engineer is expected to do. In addition to creating the HVAC system, the engineer has to be certain the installation is performed properly and fits in step with precisely what the customer needs.

For this reason most engineers are hired as consultants because they get skilled. In those situations, they might be only accountable for the next element of the style and can show understanding on what works or what doesn’t.  Most HVAC systems are started through the help of an HVAC design engineer in South Chicago. Even with all of this information you would like additional information about the HVAC Engineering services in South Chicago, IL by NY-Engineers.Com we invite you to stop by at our South Chicago Utility Filings blog.

Latest MEP Engineering Related Blog Post

A Plumbing Engineering Expert Explains Storage and Demand-Type Water Heaters

MEP Mechanical

Water heaters are household appliances that normally use natural gas or electricity to produce heat, and often include a tank to store hot water. These plumbing engineering systems provide a very important service for modern society, especially in locations with cold winters. Water heaters represent a significant portion of building energy expenses, so an optimal design is very important to achieve low-cost operation.

The following summarizes the main types of water heaters:

Traditional tank-type water heaters work with either gas or electricity. They offer a large volume of hot water that can be dispersed throughout your entire home, and typically keep the stored water at a temperature near 120°F at all times. Oil-fired models are also available but have a higher running cost than gas heaters and pollute more than other plumbing engineering solutions for water heaters.

Heat pumps also use a storage tank but differ from conventional electric heaters in the method used to raise water temperature. While conventional heaters apply voltage to an electric resistance, heat pumps are like a refrigerator operating in reverse: they cool the surrounding air to heat the water inside.

Tankless or demand-type water heaters do not store hot water, but rather heat it quickly on demand. These are also available in both gas-fired and electric versions.

How to Select a Water Heater

The selection process for a water heater depends on the specific subtype. For example, tankless heaters must be sized to provide rapid heating in short bursts, while storage heaters can provide a steadier and less intense heat output. Regardless of the type of heater chosen, consider that saving water also saves energy, since there are less gallons to heat per day.

1)   Tankless or Demand-Type Water Heater

The first step is to identify the required flowrate in gallons per minute (GPM). To provide an example, consider the following figures from 2010 plumbing standards:

  • Bath lavatory sink = 0.5 GPM
  • Standard shower = 2 to 2.5 GPM
  • Total demand = 3 GPM.

The next step is to determine the temperature rise needed, from the difference between the required water temperature and the incoming water temperature. In this example, if the required temperature is 110°F and the incoming temperature is 57°F, the temperature rise is:

  • Temperature rise = 110°F – 57°F = 53°F

In this application, it would be necessary to select a water heater that runs at 3 GPM with a 53°F heat rise. This is very different from conserving water at 110°F inside a tank, since the demand-type heater must achieve the full temperature rise the moment water flows through.

2) Storage-Type Water Heater

The design approach here is different, since this type of heater keeps a reservoir for when hot water is needed. Hot water demand is typically analyzed in gallons per hour (GPH) instead of gallons per minute (GPM). Normally, GPH values come from local plumbing codes, while demand factors and storage factors for commercial and residential occupancies are mentioned in ASHRAE Codes.

Consider the following example:

  • Hot water demand = 492 GPH
  • Demand factor = 0.3 (for private residences per ASHRAE)
  • Storage factor = 0.7 (for private residences per ASHRAE)
  • Temperature rise (ΔT) = 100°F

The first step is to determine the required recovery rate, which describes how many gallons of water must be handled by the heater per hour. This value is obtained by multiplying the total hot water demand and the demand factor:

  • Recovery rate = 492 GPH x 0.3 = 147.6 GPH

The actual heat input is calculated as follows:

  • Heat input (BTU/H) = Recovery Rate (GPH) x ΔT (°F) x Specific Heat (BTU/gal °F)
  • Heat input (BTU/H) = 147.6 GPH x 100°F x 8.33 BTU/gal °F = 122,950.8 BTU/H
  • Heat input (BTU/H) = 123 MBTU/H (thousand BTU per hour)

The required capacity of the tank is determined by the storage factor:

  • Tank capacity = Recovery Rate x Storage Factor
  • Tank capacity (gal) = 147.6 GPH x 0.7 = 103 gal

In this application, the water heater must have a capacity of 123 MBTU/H at 100°F temperature rise and a recovery rate of 147.6 GPH.

Advantages and Disadvantages of Each Heater Type in Plumbing Engineering

Like with any engineering decision, water heaters come with distinct advantages and disadvantages. This section summarizes the strong points of each technology, as well as the limitations.

Storage-type Water Heater

Advantages:

  • Lower initial cost – A traditional water heater can cost half as much as a tankless water heater.
  • Easy and inexpensive to replace – A simpler installation means there’s less that can go wrong. Maintenance and reparations have a lower cost.

Disadvantages:

  • Higher utility bill – Water is heated and reheated at a preset temperature regardless of your hot water needs. This increases your utility bill, especially during the winter.
  • Space requirements – They occupy more room and can’t be placed outside.
  • Can run out of hot water – Ever been the last in your family to get the shower? It’s a chilling experience. This problem can be avoided by purchasing a larger tank, but this also leads to more energy costs because a larger volume of water must be kept hot.
  • Shorter service life – This type of heater lasts 10-15 years. As a result you have to buy them twice as often as tankless water heaters.

Tankless Water Heater

Advantages:

  • Saves money in the long run – For homes that use below 41 gallons of hot water per day, demand-type water heaters can be 24–34% more energy efficient than conventional storage heaters.
  • Compact and versatile – They are small and can be installed in more places compared with storage heaters, even outside a wall.
  • Longer service life – Last 20 years or more, almost doubling a traditional water heater’s service life.
  • Deliver hot water on demand – Tankless heaters provide two to three gallons of hot water per minute on demand. This can up to 5 GPM with gas-fired heaters.

Disadvantages:

  • Higher initial cost – Cost between $2800 to $4500 installed, depending on the model and supplier.
  • Retrofitting adds to upfront cost – Replacing a traditional water heater with a tankless system is more complicated, since the capacity of the electric or gas service entrance must be increased in most cases.

Which Are The Best Applications for Each Type of Heater?

Storage-type water heaters tend to work best when demand for hot water is constant and fluctuating, where low-demand periods can be used to replenish the tank. Some examples of suitable applications are restaurants, commercial areas, residential apartments and hotels.

Tankless water heaters are better suited for applications where the demand of hot water is well-known and occurs occasionally in short bursts. Some suitable applications are remote bathrooms and hot tubs. These heaters are also useful as boosters for dishwashers, clothes washers and other similar appliances. They can also complement solar water heaters that are unable to meet hot water demand by themselves.

If you are considering a new domestic hot water system, the best recommendation is to get professional assistance. A plumbing engineering professional will help ensure the DHW system will be adequate for the needs of your building.

Popular Searches Related to HVAC Engineering in South Chicago, Illinois.

Architectural Engineering Courses

HVAC Engineering South Chicago, IL

What Can Our HVAC Engineers in South Chicago Do For You? Since coming to market many developers throughout Albany, New York already know that NY Engineers is the engineering firm to contact when you're searching for Construction Engineering in NY. What many local property owners have not realized is the NY Engineers is also your top choice if you're searching for HVAC Engineering services in South Chicago, IL. Those who want to learn [...]

2018-10-03T09:52:05+00:00