MEP Service in Altgeld Gardens Chicago, Illinois.

Contact Us

In search of the best MEP Firms in Chicago? The one to go to is New York Engineers. Not only for MEP Chicago but also Electrical Engineering and Sprinkler System Engineering near Altgeld Gardens Chicago. Contact us at (+1) 312 767.6877

Contact Us
Construction Engineering Companies

Construction companies throughout Bay Shore, New York have come to rely on NY-Engineers.Com for a wide range of engineering services ranging from Mechanical Engineering to Building Commissioning. This is why real estate investors in Altgeld Gardens Chicago will tell you that if you’re looking for a top-rated MEP Engineering firm in Altgeld Gardens Chicago, Illinois you need to consider New York Engineers.

Chances are, you may have walked through any specific kind of building and saw the outcomes of MEP Engineering. To put it simply, MEP centers on the mechanical, electrical and plumbing aspects of engineering. Essentially, the name already gives rise to the most typical and precise assumption of precisely what is MEP. This article may go into some infor of what is MEP Engineering.

As far as the mechanical part is involved, for both commercial and residential engineering, this deals with anything which moves. Furthermore its entails the use of complex and simple machines as well as other mechanical mechanisms to perform certain tasks. Some common mechanical engineering tasks which can be noticed on a day to day bacis are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems which deal with increasing the energy efficiency.

The electrical part of construction is focused on the electrical safety, functions, components, and even more importantly, the wiring of the building. Engineers within this unit try very hard to make certain that the layout of any building are meant to deliver enough electricity to each individual component in a safe manner where all the electrical codes are met. Some common electrical engineering tasks are available in the lighting design, modifying the voltage and allocating the electricity to every single component of building which requires a supply.

plumbing, there is a variety of plumbing factors which constitute the final style of any building. Plumbing engineering goes deeper than simply sinks, faucets, and toilets, and houses several behind the scene equipments. These being the drainage line and sewage as well as the buildings household water supply and the way it flows.

As we wrap up our article we have now just looked at what is MEP Engineering. MEP Engineering is managed in the construction industry. And, helps with completing the simply overlooked technical elements of any building.

Hiring an MEP Engineering Firm in Altgeld Gardens Chicago is Necessary for Large Construction Projects

Employing an MEP engineering company in River West Chicago, ILO, could have everything to do with the success of your construction project. These specialists might help offset the cost of making this type of hiring decision in terms of energy conservation alone. When you are speaking about big commercial buildings, energy conservation is a vital topic of discussion. It’s time to find out a few other great reasons for hiring MEP company in Illinois Medical District Chicago, IL.

Engineers have a great deal to do with the physical integrity of the building. If you may well envision, it means the unseen is extreamly essential. Design not only deals in aesthetics but the foundation of a building also its mechanism. That is merely another solid good reason that using an MEP engineering company is going to be helpful to any project.

Take into consideration all the pipes and plumbing. Think about the cooling and heating systems and the importance of getting all its components inside the exact places. Energy saving was mentioned, but energy competence is yet another important term to bring up. Energy efficiency has everything to do with your HVAC system, plus it plays an important part in energy conservation in general.

Think about your building’s shell. Consider the installation of security alarms as well as the security and safety measures put in place through the structure. With everything else described thus far, it’s safe to say that a great many areas of building construction could be either overlooked or underestimated without MEP engineers on the job.

Now with all you know you are going to be looking for the very best MEP engineering company in the market, right? It is pretty clear the best engineers need to be working in the large scale building of commercial buildings. Personalized may be the correct term to make use of to describe the way these specilists will adapt a construction project to meet the needs of the operations. There is a great possibility you would like additional details on the MEP Engineering services in Altgeld Gardens Chicago, Illinois by NY-Engineers.Com you should visit at our blog.

Utility Filings Related Blog

A Plumbing Engineering Expert Explains Storage and Demand-Type Water Heaters

Fire Protection Engineering Companies

Water heaters are household appliances that normally use natural gas or electricity to produce heat, and often include a tank to store hot water. These plumbing engineering systems provide a very important service for modern society, especially in locations with cold winters. Water heaters represent a significant portion of building energy expenses, so an optimal design is very important to achieve low-cost operation.

The following summarizes the main types of water heaters:

Traditional tank-type water heaters work with either gas or electricity. They offer a large volume of hot water that can be dispersed throughout your entire home, and typically keep the stored water at a temperature near 120°F at all times. Oil-fired models are also available but have a higher running cost than gas heaters and pollute more than other plumbing engineering solutions for water heaters.

Heat pumps also use a storage tank but differ from conventional electric heaters in the method used to raise water temperature. While conventional heaters apply voltage to an electric resistance, heat pumps are like a refrigerator operating in reverse: they cool the surrounding air to heat the water inside.

Tankless or demand-type water heaters do not store hot water, but rather heat it quickly on demand. These are also available in both gas-fired and electric versions.

How to Select a Water Heater

The selection process for a water heater depends on the specific subtype. For example, tankless heaters must be sized to provide rapid heating in short bursts, while storage heaters can provide a steadier and less intense heat output. Regardless of the type of heater chosen, consider that saving water also saves energy, since there are less gallons to heat per day.

1)   Tankless or Demand-Type Water Heater

The first step is to identify the required flowrate in gallons per minute (GPM). To provide an example, consider the following figures from 2010 plumbing standards:

  • Bath lavatory sink = 0.5 GPM
  • Standard shower = 2 to 2.5 GPM
  • Total demand = 3 GPM.

The next step is to determine the temperature rise needed, from the difference between the required water temperature and the incoming water temperature. In this example, if the required temperature is 110°F and the incoming temperature is 57°F, the temperature rise is:

  • Temperature rise = 110°F – 57°F = 53°F

In this application, it would be necessary to select a water heater that runs at 3 GPM with a 53°F heat rise. This is very different from conserving water at 110°F inside a tank, since the demand-type heater must achieve the full temperature rise the moment water flows through.

2) Storage-Type Water Heater

The design approach here is different, since this type of heater keeps a reservoir for when hot water is needed. Hot water demand is typically analyzed in gallons per hour (GPH) instead of gallons per minute (GPM). Normally, GPH values come from local plumbing codes, while demand factors and storage factors for commercial and residential occupancies are mentioned in ASHRAE Codes.

Consider the following example:

  • Hot water demand = 492 GPH
  • Demand factor = 0.3 (for private residences per ASHRAE)
  • Storage factor = 0.7 (for private residences per ASHRAE)
  • Temperature rise (ΔT) = 100°F

The first step is to determine the required recovery rate, which describes how many gallons of water must be handled by the heater per hour. This value is obtained by multiplying the total hot water demand and the demand factor:

  • Recovery rate = 492 GPH x 0.3 = 147.6 GPH

The actual heat input is calculated as follows:

  • Heat input (BTU/H) = Recovery Rate (GPH) x ΔT (°F) x Specific Heat (BTU/gal °F)
  • Heat input (BTU/H) = 147.6 GPH x 100°F x 8.33 BTU/gal °F = 122,950.8 BTU/H
  • Heat input (BTU/H) = 123 MBTU/H (thousand BTU per hour)

The required capacity of the tank is determined by the storage factor:

  • Tank capacity = Recovery Rate x Storage Factor
  • Tank capacity (gal) = 147.6 GPH x 0.7 = 103 gal

In this application, the water heater must have a capacity of 123 MBTU/H at 100°F temperature rise and a recovery rate of 147.6 GPH.

Advantages and Disadvantages of Each Heater Type in Plumbing Engineering

Like with any engineering decision, water heaters come with distinct advantages and disadvantages. This section summarizes the strong points of each technology, as well as the limitations.

Storage-type Water Heater

Advantages:

  • Lower initial cost – A traditional water heater can cost half as much as a tankless water heater.
  • Easy and inexpensive to replace – A simpler installation means there’s less that can go wrong. Maintenance and reparations have a lower cost.

Disadvantages:

  • Higher utility bill – Water is heated and reheated at a preset temperature regardless of your hot water needs. This increases your utility bill, especially during the winter.
  • Space requirements – They occupy more room and can’t be placed outside.
  • Can run out of hot water – Ever been the last in your family to get the shower? It’s a chilling experience. This problem can be avoided by purchasing a larger tank, but this also leads to more energy costs because a larger volume of water must be kept hot.
  • Shorter service life – This type of heater lasts 10-15 years. As a result you have to buy them twice as often as tankless water heaters.

Tankless Water Heater

Advantages:

  • Saves money in the long run – For homes that use below 41 gallons of hot water per day, demand-type water heaters can be 24–34% more energy efficient than conventional storage heaters.
  • Compact and versatile – They are small and can be installed in more places compared with storage heaters, even outside a wall.
  • Longer service life – Last 20 years or more, almost doubling a traditional water heater’s service life.
  • Deliver hot water on demand – Tankless heaters provide two to three gallons of hot water per minute on demand. This can up to 5 GPM with gas-fired heaters.

Disadvantages:

  • Higher initial cost – Cost between $2800 to $4500 installed, depending on the model and supplier.
  • Retrofitting adds to upfront cost – Replacing a traditional water heater with a tankless system is more complicated, since the capacity of the electric or gas service entrance must be increased in most cases.

Which Are The Best Applications for Each Type of Heater?

Storage-type water heaters tend to work best when demand for hot water is constant and fluctuating, where low-demand periods can be used to replenish the tank. Some examples of suitable applications are restaurants, commercial areas, residential apartments and hotels.

Tankless water heaters are better suited for applications where the demand of hot water is well-known and occurs occasionally in short bursts. Some suitable applications are remote bathrooms and hot tubs. These heaters are also useful as boosters for dishwashers, clothes washers and other similar appliances. They can also complement solar water heaters that are unable to meet hot water demand by themselves.

If you are considering a new domestic hot water system, the best recommendation is to get professional assistance. A plumbing engineering professional will help ensure the DHW system will be adequate for the needs of your building.

searches related to Engineering Reports in Altgeld Gardens Chicago, Illinois.

Electrical Engineering Subjects

(MEP) Engineering Service in Altgeld Gardens Chicago

MEP Engineers Altgeld Gardens Chicago! If you re searching for a dependable MEP Firms in Chicago? Your best bet is to contact is NY Engineers. Not only for MEP Firms in Chicago but also Mechanical Engineering and Protection Engineering near Altgeld Gardens Chicago. Call (+1) (312) 767-6877 Quite a few builders throughout Tonawanda, NY have come to depend on NY Engineers for a wide range of engineering services ranging from Fire [...]

2018-09-07T08:19:22+00:00