MEP Service in Armour Square Chicago, IL.

Contact Us

Looking for MEP Firms in Chicago? Your best bet is to reach out to is New York Engineers. Not only for MEP Firms in Chicago but also Mechanical Engineering and Protection Engineering in or near Armour Square Chicago. Contact us at (312) 767-6877

Contact Us
Value Engineers Near Me

Property owners throughout Niagara Falls, NY have come to depend on NY Engineers for a wide range of engineering services ranging from Electrical Engineering to Construction Administration. For this reason construction companies in Armour Square Chicago will tell you that if you are seeking a excellent MEP Engineering firm in Armour Square Chicago, Illinois you should consider NY-Engineers.Com.

Chances are, you have walked into any specific form of building and seen the outcome of MEP Engineering. To put it simply, MEP focuses in the mechanical, electrical and plumbing aspects of engineering. In simple terms, MEP already gives a clue to the most common and spot on theory of what is MEP. This article will go into some details of what is MEP Engineering.

As far as the mechanical part is concerned, for residential and commercial engineering, this deals with anything which moves. Furthermore its involves the use of complex and simple machines as well as other mechanical mechanisms to execute certain tasks. Some normal mechanical engineering jobs that can be noticed on a day to day bacis are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems that deal with improving the energy efficiency.

The electrical aspect of construction is focused on the components, functions, electrical safety, and even more importantly, the wiring associated with a building. Engineers in this particular sector go to great lengths to ensure the layout of your building are meant to bring sufficient electricity to every individual component in a safe manner where every one of the electrical codes are followed. Some commonplace electrical engineering jobs can be obtained from the lighting design, regulating the voltage and distributing the energy to every component inside the building that takes a supply.

As far as plumbing, there exists a variety of plumbing components which constitute the final model of any structure. Plumbing engineering goes deeper than simply faucets, toilets, and sinks, and holds several behind the scene appliances. These being the drainage line and sewage and also the buildings household water supply and just how it flows.

As we wrap up our article we have just reviewed what is MEP Engineering. MEP Engineering is managed inside the construction industry. And, helps with completing the simply ignored technical areas of any building.

Hiring an MEP Engineering Firm in Armour Square Chicago is Essential for Major Construction Projects

Employing an MEP firm in Lincoln Square Chicago, ILO, could have everything to do with the achievements of your construction project. These professionals will help offset the price of making such a hiring decision when it comes to energy upkeep alone. While you are referring to big commercial buildings, energy management is really a topic of discussion. It’s time to determine a few other great causes of using MEP firm in Englewood Chicago, Illinois.

Engineers have everything to do with the physical integrity of the building. As you can well imagine, that means the hidden is extreamly vital. Design not merely deals in looks but the basis of a building and its workings. That is the next solid logic why hiring an MEP engineering company will likely be beneficial to any project.

Consider every one of the pipes and plumbing. Consider the cooling and heating systems and the importance of getting each one of its components in the right places. Energy saving was stated, however energy efficiency is an additional significant term to speak of. Energy efficiency concerns your HVAC system, plus it plays a huge part in energy maintenance as a whole.

Think about your building’s foundation. Consider setting up home security systems and the security and safety measures set up along the entire structure. With everything else mentioned so far, it’s reliable advice that a great many areas of building construction might be either overlooked or minimized short of MEP experts on the job.

Now with all you have read you are going to look to get the best MEP engineering company in the market, right? It’s pretty clear that this best engineers have to be in the large scale building of commercial buildings. Customised is the correct term to work with to describe the way in which these pros will modify a construction project to meet the requirements of your operations. There is only so much you can save this page if you would like more details about the MEP Engineering services in Armour Square Chicago, IL by NY Engineers you should visit at our Armour Square Chicago Plumbing Engineering blog.

New Engineering Reports Related Blog Article

Cut Costs: Simplify Your MEP Engineering Design

Construction Engineer Job Description

There are savings opportunities throughout the entire engineering process, not just the construction stage. With effective communication and adequate team management, it is possible to optimize the design process and reduce costs of your MEP engineering project without compromising quality. High-level design software also helps: it may come at a high price, but the time and cost savings are significant.

When the engineering design process becomes long and expensive, it is typically due to one of the following factors:

  • Poor communication between design teams. This is especially important in the case of mechanical, electrical and plumbing systems – all three have complex physical layouts, and there is a high chance of overlap between components of different systems when team communication is poor.
  • Excessive changes. MEP designs are carried out on existing architectural plans, which means architectural changes can become very disruptive as the MEP design process approaches completion. Completing the final version of the architectural design is highly recommended before MEP design starts; a major architectural change after MEP design has been completed can greatly extend the design process and its cost. Changes to MEP systems are also disruptive, since they have a high degree of interdependence.

This article will provide some recommendations that can help you simplify the engineering design process while reducing its cost. There is a basic rule of thumb for cost optimization: modifications are cheap or even free when requested early in the design process, and prohibitively expensive when requested in the final stages of construction.

1) Involve All Project Stakeholders Before the Design Process Starts

If the needs and requirements of all parties are clearly stated from the beginning, they can be accounted for during project design. For example, some contractors and equipment vendors may have special requirements; if this information is known before MEP engineering design starts, changes are avoided later. These changes normally add man-hours to the design process, and if omitted they may result in expensive modifications during construction.

Make sure your MEP design team reviews all equipment specifications before the design process starts, ensuring any special requirements are accounted for. Keep in mind that some building systems involve all three areas of MEP; for example, chilled water systems involve both electrical installations and hydronic piping.

2) Follow an Integral Approach for Mechanical, Electrical and Plumbing Design

As previously stated, these three systems have very complex layouts, and if design teams don’t work in coordination, you are very likely to have issues with overlapping equipment locations. Also, keep in mind that all three systems distribute fluids or air throughout the building, and the means of distribution must not interfere with each other.

  • Mechanical systems typically involve air ducts, refrigerant lines and hydronic piping. If combustion-based heating is deployed, there will also be a chimney for flue gases, along with fuel piping and tanks.
  • Electrical Systems involve conduit and wiring, and there are also bus ducts in high-power applications. Keep in mind that transformers, motors, generators, panelboards and similar equipment may require a lot of space, and clearances may be required with respect to walls and other pieces of equipment.
  • Plumbing Systems involve pumps, as well as independent piping for potable water, wastewater, etc.

The layout of ducts and piping must be specified so that the least amount of materials is used, but taking care not to overlap components from different building systems.

3) Use Three-Dimensional MEP Engineering Design Software

There are now MEP design solutions where a three-dimensional model of the building is stored in a web server that can be accessed by all design teams, and building systems are laid out and specified directly on the model. This offers several advantages over conventional two-dimensional design:

  • Equipment locations can be visualized more clearly, especially when components from all three systems must be installed in tight spaces.
  • Modern MEP design software is smart enough to detect overlap, and design engineers can be notified immediately if it occurs. For example, if the optimal location for two pieces of equipment is the same, they can decide which of the two devices can be relocated for the least cost.
  • The confusion associated with different versions of the same design is eliminated; versions no longer exist, since the entire design process is carried out on a unified 3D model.
  • Most three-dimensional MEP design software can calculate all bills of materials (BOM) automatically, further reducing the total man-hours required for the project.

MEP design software has a high upfront cost, but the investment is compensated by the sheer number of man-hours saved. Also, there are now software solutions with the option of paying a recurring monthly fee, instead of an expensive one-time license. This purchasing model tends to be more attractive for smaller companies with limited budgets.

Having a well-trained staff is just as important as implementing a powerful software solution. If you will invest in a high-level MEP design package, make sure your engineering team learns how to use it effectively. For example, software solutions often have keyboard shortcuts and commands that considerably speed up the work, and using them is much faster than clicking on functions with the mouse. The difference may not be evident for a single action, but when you consider the total man-hours saved the effect is significant.

4) Use a Project Management Platform

E-mail is not always practical when coordinating multidisciplinary teams: tasks must be assigned textually, and there is always the chance of missing or misspelling one of the e-mail addresses. There are now project management platforms where team members can be added to common dashboards, and notifications are sent automatically whenever a task is assigned, modified or completed.

Project management platforms allow team members to focus on the tasks assigned, while communication is streamlined and automated in the background. For example, marking a milestone as finished and linking a project deliverable is faster than sending an e-mail to the entire team with the file as an attachment.

5) Consider Outsourcing the Entire MEP Design Process

Having an in-house engineering team may make sense in industrial settings, or other business sectors where technical assistance is required on an ongoing basis. However, there are companies for which the cost of a permanent engineering staff can’t be justified, and in makes more sense to hire an external firm specializing in MEP design and consulting. This way, the client can save the capital and time required for workstations, software and team building, dedicating it to core business activities instead.

If you will follow this approach, we strongly recommend you hire a firm that provides integral MEP design; if you hire separate designers for mechanical, electrical and plumbing installations, projection integration will be a daunting task.

Concluding Remarks

When optimizing the engineering design process, remember that poor team communication and frequent changes are the main factors that increase costs. With the combination of solid management practices, information technologies and strategic outsourcing, you can improve results while cutting costs. Effective communication before and during your MEP engineering project also promotes collaboration and mitigates conflict.

searches related to Electrical Engineering Armour Square Chicago, IL.

MEP Engineering Books

(MEP) Engineering Service in Armour Square Chicago

MEP Firm Armour Square Chicago! If you re looking for a fast responding MEP Firms in Chicago? Your best bet is to reach out to is NY Engineers. Not only for MEP Engineering in Chicago but also Electrical Engineering and Sprinkler System Engineering in or near Armour Square Chicago. Call (+1) (312) 767.6877 Quite a few construction companies throughout Bay Shore, NY have come to rely on NY Engineers for a [...]

2018-09-12T11:12:07+00:00