MEP Engineering Services in Brighton Park Chicago, IL.

Value Engineering

Real estate investors throughout Lindenhurst, NY have come to depend on New York Engineers for a wide range of engineering services ranging from Fire Protection Engineering to Energy Modeling. That is why building owners in Brighton Park Chicago will tell you that if you’re looking for a top-rated MEP Engineering firm in Brighton Park Chicago, IL you should consider NY Engineers.

Chances are, you may have walked into any specific form of building and saw the outcomes of MEP Engineering. In other words, MEP concentrates in the mechanical, electrical and plumbing aspects of engineering. Essentially, the name already gives a clue to the most prevalent and correct assumption of exactly what is MEP. This article should go into some infor of what is MEP Engineering.

So far as the mechanical side is concerned, for commercial and residential engineering, this handles anything that moves. In addition its involves using complex and simple machines and also other mechanical mechanisms to carry out certain tasks. Some normal mechanical engineering tasks which may be noticed on a day to day bacis are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems which deal with improving the energy productivity.

The electrical element of construction is focused on the components, functions, electrical safety, and more importantly, the wiring for any building. Engineers within this section go to great lengths to make certain that the schematics of your building are made to bring sufficient electricity to every component in a safe manner where every one of the electrical codes are met. Some common electrical engineering jobs may be found in the lighting design, modifying the voltage and allocating the electricity to every single component of building which requires a supply.

So far as plumbing, there is a wide array of plumbing factors which constitute the final model of any building. Plumbing engineering goes deeper than only sinks, faucets, and toilets, and accommodates many behind the scene equipments. These being the drainage line and sewage and also the buildings household water supply and the way it flows.

As we conclude this article we certainly have just considered what is MEP Engineering. MEP Engineering is managed in the construction industry. And, supports completing the easily overlooked technical aspects of any building.

Hiring an MEP Engineering Firm in Brighton Park Chicago is Essential for Major Construction Projects

Using an MEP engineering company in Wrightwood Chicago, Illinois, could have a whole lot to do with the safety of your construction project. These professionals might help offset the cost of making such a hiring decision in relation to energy conservation alone. While you are talking about large commercial structures, energy conservation is really a topic of discussion. It’s time to determine a few other great reasons behind employing MEP engineers in River’s Edge Chicago, ILO.

Engineers have a great deal to do with the structural reliability of a building. As you can well imagine, this means the hidden is extreamly important. Design not simply deals in looks but the foundation of a building including its components. That is just another solid reason why employing an MEP engineering company is going to be helpful to any project.

Consider each of the pipes and plumbing. Think about the heating and air conditioning systems and how important it is to get all of its components in the precise places. Energy saving was mentioned, but energy efficiency is yet another vital term to bring up. Energy efficiency is related to your HVAC system, plus it plays a vital role in energy conservation in general.

Take into consideration your building’s base. Consider installing security systems and the safety and security measures put in place through the structure. With everything else mentioned to date, it’s reliable advice that lots of facets of building construction might be either overlooked or underestimated without MEP engineers at the job.

Now with this info you are going to be looking to get the best MEP engineering company in the market, right? It is pretty obvious how the best engineers must be in the massive building of commercial structures. Tailor made may be the best term to use to describe the way these pros will customize a construction project to meet the needs of your respective operations. Even with all of this information you would like additional information on the MEP Engineering services in Brighton Park Chicago, Illinois by New York Engineers you should check out at our blog.

New CAD to Revit Modeling Related Blog Article

How Mechanical Engineers Compare Operating Expenses of Different Water Heater Models

Construction Engineers

One of the key characteristics to consider when deciding between several water heater options is the operating cost; the heater with the lowest price tag is not necessarily the least expensive to own in the long term. Operating cost is determined in great part by equipment efficiency, but there are other equally important factors that mechanical engineers want you to consider:

  • Energy sources have different unit prices. In the case of heating systems, the input is generally electricity, natural gas, propane or fuel oil. There are also zero-cost energy sources, such as geothermal energy and sunlight.
  • Operating schedules may vary depending on the type of heater. Rated power is not the only factor that determines total energy consumption; the operating schedule must also be considered. For example, tankless water heaters have a high rated power but operate in short bursts, saving energy compared to a storage heater that draws less power but operates continuously, assuming the energy source is the same.

This article will provide a guide for calculating and comparing operating expenses with different types of heaters. After these values are calculated, they can be weighed against the upfront cost of each heating system to find the most cost-effective option.

As with any investment in equipment, considering the total ownership cost is very important when purchasing a heater: to calculate the real heating cost per BTU or kWh produced, it is necessary to factor in the initial investment and any maintenance or reparation expenses. For instance, saying that solar heating is free would not be completely true; although the energy input is free, there are equipment and installation costs, and in multistory buildings a small pump may be required for water to reach the rooftop.

Energy Factor: How Mechanical Engineers Calculate Heating Expenses

The energy factor (EF) is the ratio of heating output to energy input offered by a heating system. It considers how effectively the heater converts its energy input into an increase in water temperature, but also accounts for other aspects of heater operation:

  • Standby losses – These losses are found in storage heaters, and they represent the heat loss associated with keeping the water in the tank at the desired temperature. Although proper insulation mitigates standby losses, they are impossible to eliminate completely.
  • Cycling losses – These losses occur as water circulates through the heater’s internal piping, and through the storage tank if present.

Heaters running on fossil fuels have energy factors well below unity, electric tankless heaters operate close an EF of 1, and heat pumps have EF values higher than unity because their inverse refrigeration cycle allows them to draw heat from the surrounding environment.

Comparing Water Heaters: An Example

Assume you are presented with four water heaters for a household that consumes 80 million BTU per year, and want to calculate the operating costs associated with each alternative:

  • A gas-fired storage heater with an EF of 0.55
  • A tankless electric heater with an EF of 0.97
  • A tankless gas heater with an EF of 0.80
  • An electric air-source heat pump with an EF of 2.5

Since the example is for one city, assume the cost of natural gas is $1.20 per 100,000 BTU, and the electricity rate is $0.18 per kilowatt-hour.

  • For the gas heaters, the calculation procedure can be carried out directly because the heating output and energy input are both in BTU.
  • The tankless electric heater and heat pump run with electricity, so the heating output must be converted to kWh before proceeding.
  • Heating Output (kWh)=80,000,000 BTU x 1kWh/3412.14 BTU= 23,446 kWh

Other than this, the calculation procedure is the same for all four heaters. The yearly heating output is divided by the energy factor (EF) to calculate yearly energy consumption, and this value is then multiplied by the unit price of energy, per kWh or BTU. This formula is applied by mechanical engineers to all four water heaters, to determine which is the least expensive to operate.

Gas-fired storage heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.55×1.20 USD/100,000 BTU=1745 USD

Tankless electric heater operating cost:
Operating Cost (USD/yr)=23,446 kWh/.97X.18 USD/kWh=4351 USD

Tankless gas heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.8 X 1.20 USD/100,000 BTU=1200 USD

Electric air-source heat pump operating cost:
Operating Cost (USD/yr)=23,446 kWh/2.5 X .18 USD/kWh=1688 USD

Operating Cost Comparison

In this case, the tankless gas heater has the lowest operating cost. The heat pump and gas-fired storage heater follow, although the heat pump wins by a slight margin. The tankless electric heater is the most expensive to operate by far.

Total Cost of Owning and Operating Heaters

For a full evaluation, the upfront cost and service life must be considered as well. For this example, assume the following cost and rated life values:

HeaterInstalled CostService life
Heat Pump$180015
Tankless electric heater$150020
Tankless gas heater$200020
Gas-fired storage heater$120010

For simplicity, the analysis will be limited to upfront and operation costs. The yearly ownership cost of each heater option would be:

  • Heat Pump Cost = $1688/year + ($1800/15 years) = $1808/year
  • Tankless Electric Heater = $4351/year + ($1500/20 years) = $4426/year
  • Tankless Gas Heater = $1200/year + ($2000/20 years) = $1300/year
  • Gas-Fired Storage Heater = $1745/year + ($1200/10 years) = $1865/year

The tankless gas heater is still the winner in this case, despite its higher upfront cost. The heat pump and gas-fired storage heater have a similar cost of ownership, and the tankless electric heater is very expensive to operate due to the high electricity rates of some cities. However, keep in mind this is just an example, and different results may be obtained for different locations.

Concluding Remarks

To determine which type of heater is the best match for your property, getting a professional assessment from one or more mechanical engineers is highly recommended. For example, if you don’t have a chimney, the installation cost of any gas heater will increase significantly. Remember that electricity and gas prices also vary by location, and what is true in one location may not always apply in another city or state.

Popular searches related to Building Commissioning in Brighton Park Chicago, IL.

Electrical Engineering Information

(MEP) Engineering Service in Brighton Park Chicago

How Can Our Brighton Park Chicago MEP Engineers Help You! Many property owners throughout Baldwin, New York have come to depend on New York Engineers for a wide range of engineering services ranging from Mechanical Engineering to CAD to Revit Modeling. This is why property owners in Brighton Park Chicago will tell you that if you're seeking a dependable MEP Engineering firm in Brighton Park Chicago, Illinois you need to consider New [...]

2018-09-04T03:40:03+00:00