MEP Engineering Services in Bucktown Chicago, Illinois.

Value Engineering Process Steps

Real estate investors throughout North Bellmore, NY have come to rely on NY-Engineers.Com for a wide range of engineering services ranging from Electrical Engineering to Engineering Reports. This is why developers in Bucktown Chicago will tell you that if you are looking for a excellent MEP Engineering firm in Bucktown Chicago, IL you should consider NY Engineers.

Odds are, you may have walked into any specific form of building and observed the final results of MEP Engineering. Simply put, MEP centers in the mechanical, electrical and plumbing elements of engineering. Essentially, the name already gives a clue to the most frequent and accurate theory of what is MEP. This article goes into some infor of what is MEP Engineering.

So far as the mechanical side is concerned, for commercial and residential engineering, this relates to anything which moves. Furthermore its entails the use of complex and uncomplicated machines as well as other mechanical mechanisms to do certain tasks. Some common mechanical engineering jobs that can be noticed everyday are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems which take care of improving the energy productivity.

The electrical aspect of construction is focused on the functions, components, electrical safety, and most importantly, the wiring of the building. Engineers within this unit go to great lengths to make sure that the layout of your building are designed to deliver enough electricity to every component in a safe manner where each of the electrical codes are followed. Some familiar electrical engineering tasks can be found in the lighting design, regulating the voltage and distributing the power to each and every component within the building which requires a supply.

With regards to plumbing, there may be a wide array of plumbing factors which constitute the final model of any structure. Plumbing engineering goes deeper than merely sinks, faucets, and toilets, and houses several behind the scene appliances. These being the sewage and drainage lines as well as the buildings household water supply and the way it flows.

As we conclude this article we have now just considered what is MEP Engineering. MEP Engineering is administered in the construction industry. And, supports completing the easily overlooked technical elements of any building.

Hiring an MEP Engineering Firm in Bucktown Chicago is Important for Huge Construction Projects

Using an MEP engineering firm in Wrightwood Chicago, ILO, may have a whole lot to do with the achievements of your construction project. These engineers can help offset the fee for making this kind of hiring decision in terms of energy upkeep alone. If you are talking about huge commercial structures, energy upkeep is a crucial topic of discussion. It’s time to find out some other great causes of employing MEP engineers in Budlong Woods Chicago, ILO.

Engineers have a lot to do with the structural reliability of the building. As you can well envision, it means the unseen is very important. Design not merely deals in aesthetics but the groundwork of a building also its components. That is merely another solid logic why employing an MEP engineering company will likely be useful to any project.

Take into consideration all of the pipes and plumbing. Consider the heating and cooling systems and the importance of getting all of its mechanics inside the right places. Energy saving was mentioned, but energy competence is another vital term to discuss. Energy efficiency is about your HVAC system, plus it plays a huge role in energy conservation overall.

Think about your building’s foundation. Consider the installation of security alarms and the security and safety measures put in place throughout the structure. With everything else talked about so far, it’s safe to say that many elements of building construction could be either ignored or minimized short of MEP pros on the job.

Now with all you have read you are going to look for the best MEP engineering firm in the market, right? It is very clear that the best engineers really need to be active in the large scale construction of commercial buildings. Customised is the right term to use to explain how these experts will alter a construction project to meet the needs of your own operations. Even with all of this information you would like more information about the MEP Engineering services in Bucktown Chicago, IL by NY-Engineers.Com we invite you to take a look at our Bucktown Chicago Building Commissioning blog.

MEP Engineering Related Blog Post

Construction Engineers Present Tips from the Passive House Institute US

How To Become An HVAC Engineer

The Passive House Institute US (PHIUS) is an organization that promotes passive building standards and best practices for construction engineers and others. They also offer certification programs for buildings and products, as well as professional certifications for architects and engineers. This article will provide an overview of some their main guidelines for passive house construction. It is important to note that, although the word “house” is used, these concepts apply for high-rise multifamily buildings and commercial facilities as well.

The PHIUS summarizes its building philosophy as “maximize your gains, minimize your losses”, focusing on achieving synergy between energy efficiency and comfort. The five main principles to consider for passive building are the following:

  1. High-performance insulation
  2. Airtight building envelope
  3. High-performance windows
  4. Using heat and moisture recovery to minimize HVAC expenses
  5. Managing solar heat gain, promoting it during the winter and reducing it during the summer

According to PHIUS, a passive building is around 5% to 10% more expensive than a conventional one, but this is compensated many times during the building lifetime through energy savings. In addition, passive buildings are more comfortable, since they eliminate two main issues affecting conventional buildings: air drafts and temperature fluctuation. In commercial settings, comfort can also lead to increase profits, by stimulating employees to be more productive.

1)   High-Performance Insulation

The main benefit of high-performance insulation is that space heating and cooling loads are reduced. As a result, HVAC systems can be sized smaller, compared with a building that uses the minimum insulation required by construction codes. A smaller HVAC system can be installed with less capital and also has a lower operating cost.

The PHIUS emphasizes the importance of avoiding thermal bridges, which are concentrated spots in the building envelope where insulation is deficient compared with the surroundings. Heat transfer tends to concentrate in thermal bridges, causing unwanted heat gain in the summer and heat loss in the winter.

Current building codes are limited when addressing thermal bridges, since their specifications are based on U-values for insulation and one-dimensional modeling of thermal envelopes. Thermal bridges are a complex three-dimensional phenomenon that can be addressed more effectively with the building modeling software utilized by knowledgeable construction engineers.

2) Airtightness

Air leaks can be just as detrimental as poor insulation when it comes to building envelope performance. Any air exchange between conditioned and unconditioned spaces causes heating and cooling equipment to work harder. Air leakage tends to be more common around windows, doors, plumbing fixtures and electrical fixtures.

In existing constructions, air leakage can be addressed effectively with caulking and weatherstripping. Both have the same purpose, which is blocking spaces where air leakage occurs. The main difference is that caulking is designed for fixed elements like plumbing and electrical fixtures, while weatherstripping is designed to tolerate friction in moving elements like doors and windows. However, caulking should be used for the external edges of door and window frames, which are not subject to relative motion. In new constructions, airtightness can be built into the envelope during the project construction phase.

3) High-Performance Windows

Significant heat transfer occurs through windows, even when the surrounding walls are well insulated. High-performance windows are one of those energy efficiency upgrades that can be deployed in existing constructions, but which is much more cost-effective in new buildings.

  • In an existing building, the upgrade cost is the full price of the window plus the associated labor cost.
  • In new constructions, there is a baseline window and labor cost that is unavoidable, and only the price premium of a high-performance window is considered for financial analysis.

The most energy-efficient windows in the market currently use a triple pane, inert gas to fill the two resulting spaces, a fiberglass frame and low-emissivity coating for the glass. Double pane windows apply the same concept, giving up on part of the energy efficiency to achieve a lower price. However, both triple-pane and double-pane windows are much more efficient than conventional models with single uncoated sheets of glass and metallic frames. A double-pane window is around 50% more efficient than a conventional one, while a triple-pane window provides an efficiency boost of 20-30% compared with a double-pane one.

4) Heat and Moisture Recovery

Since HVAC systems have the goal of controlling temperature and humidity, a higher efficiency can be achieved if the exhaust air is used to precondition the intake air. Heat-recovery ventilation (HRV) only exchanges heat between the supply and exhaust airstreams, while energy-recovery ventilation (ERV) exchanges heat and moisture. The operating principle is reversed for summer and winter conditions:

  • Outdoor air tends to be warmer and more humid during the summer. Therefore, the exhaust air can be used to remove some of its heat and moisture. This reduces the HVAC load and improves energy efficiency.
  • Outdoor air is cool and dry during the winter, so the exhaust air can be used to preheat and humidify it before reaching the HVAC system. This also achieves a load reduction.

5) Solar Heat Gain Optimization

Managing solar heat gain can be tricky. It is beneficial during the winter since it reduces the load on space heating systems; however, during the summer it increases cooling load and must, therefore, be minimized. Also, solar glare should be avoided regardless of the time of the year – it causes discomfort and distraction while having the potential to damage human vision.

Window shades are a simple and effective measure to control solar heat gain. The sun is higher in the sky during the summer, and shades block a larger portion of its radiation. The sun’s altitude drops as winter approaches, and more radiation enters the building, reducing space heating loads. In some locations in the northern hemisphere, is important to note that south-facing windows get the most sunshine throughout the year, and north-facing windows get the least. East-facing windows receive plenty of sunshine during the morning and west-facing windows during the afternoon. Windows should be arranged so that the sun itself is not in direct line-of-sight for occupants. Greater control is possible with optimal building orientation, window shades, and well-placed vegetation.

Construction Engineers Make These Final Recommendations

Developers interested in a passive building can achieve the best results by working with certified design professionals. For example, the Passive House Institute US has the Certified Passive House Consultant (CPHC) program. There are more than 1,300 CPHCs in the USA, and they have been extensively trained in energy modeling software and passive building while considering the variety of climate zones in the USA. The US Green Building Council also offers the LEED certification for construction engineers and other professionals, where many topics covered deal with energy-efficient construction.

Common searches related to Building Commissioning in Bucktown Chicago, Illinois.

HVAC Engineering

(MEP) Engineering Service in Bucktown Chicago

How Can Our Bucktown Chicago MEP Engineers Help You! Successful general contractors throughout Lynbrook, NY have come to rely on NY Engineers for a wide range of engineering services ranging from Fire Protection Engineering to Energy Modeling. This is why developers in Bucktown Chicago will tell you that if you are seeking a dependable MEP Engineering firm in Bucktown Chicago, IL you need to consider New York Engineers. A mechanical, electrical, plumbing [...]

2018-09-15T18:35:10+00:00