MEP Service in Budlong Woods Chicago, IL.

Contact Us

In search of the top MEP Chicago? Your best bet is to reach out to is NY-Engineers.Com. Not only for MEP Chicago but also Architectural Engineering and Protection Engineering throughout Budlong Woods Chicago. Call us at (+1) (312) 767.6877

Contact Us
Value Engineering Process Steps

Construction companies throughout Plattsburgh, NY have come to rely on NY-Engineers.Com for a wide range of engineering services ranging from MEP Engineering to CAD to Revit Modeling. This is why real estate investors in Budlong Woods Chicago will tell you that if you’re looking for a top-rated MEP Engineering firm in Budlong Woods Chicago, IL you need to consider New York Engineers.

Chances are, you have walked into any specific kind of building and seen the results of MEP Engineering. Basically, MEP centers in the mechanical, electrical and plumbing facets of engineering. In simple terms, the name already gives rise to the most prevalent and spot on theory of what is MEP. This article goes into some specifics of what is MEP Engineering.

As far as the mechanical side is involved, both for commercial and residential engineering, this deals with anything that moves. Moreover its involves the application of complex and uncomplicated machines and also other mechanical mechanisms to execute certain tasks. Some ordinary mechanical engineering tasks which can be noticed regularly are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems that handle boosting the energy efficiency.

The electrical facet of construction is focused on the electrical safety, functions, components, and most importantly, the wiring associated with a building. Engineers in this particular sector go to great lengths to make certain that the layout of your building are meant to provide ample power to each individual component in a safe manner where all the electrical codes are followed. Some commonplace electrical engineering functions are available in the lighting design, modifying the voltage and allocating the power to every component within the building that takes a supply.

As far as plumbing, there exists a variety of plumbing components which constitute the final form of any building. Plumbing engineering goes deeper than just toilets, faucets, and sinks, and accommodates several behind the scene equipments. These being the drainage line and sewage as well as the buildings domestic water supply and just how it flows.

As we conclude this article we have just looked at what is MEP Engineering. MEP Engineering is administered inside the construction industry. And, assists in completing the easily unnoticed technical facets of any building.

Hiring an MEP Engineering Firm in Budlong Woods Chicago is Necessary for Major Construction Projects

Using an MEP engineering company in East Pilsen Chicago, Illinois, might have everything to do with the safety of your construction project. These professionals will help offset the expense of making this type of hiring decision when it comes to energy saving alone. When you are talking about big commercial buildings, energy management is really a topic of discussion. It’s time to determine a few other great reasons for hiring MEP engineering firm in Albany Park Chicago, IL.

Engineers play an important role in the structural integrity of your building. As you may well imagine, this means the unseen is extreamly important. Design not simply deals in looks but the groundwork of a building including its workings. Which is just another solid reason why hiring an MEP engineering firm will be useful to any project.

Think of each of the pipes and plumbing. Think about the heating and cooling systems and how important it is to get all its mechanics in the precise places. Energy maintenance was stated, however energy efficiency can be another important term to discuss. Energy competence is related to your HVAC system, and it plays a vital role in energy maintenance overall.

Take into consideration your building’s foundation. Consider setting up security systems and the safety and security measures set up through the entire structure. With everything discussed up to now, it’s safe to say that many areas of building construction might be either disregarded or minimized without MEP engineers at the job.

Now with this info you will be looking to get the best MEP engineering company in the business, right? It is very clear that the best engineers must be in the large scale construction of commercial buildings. Tailor made is definitely the correct term to work with to illustrate how these pros will modify a construction project to meet the needs of the operations. There is a great possibility you would like additional details about the MEP Engineering services in Budlong Woods Chicago, Illinois by NY Engineers we invite you to take a look at our blog.

New MEP Engineering Related Blog Post

A Plumbing Engineering Expert Explains Storage and Demand-Type Water Heaters

Mechanical Engineering Career

Water heaters are household appliances that normally use natural gas or electricity to produce heat, and often include a tank to store hot water. These plumbing engineering systems provide a very important service for modern society, especially in locations with cold winters. Water heaters represent a significant portion of building energy expenses, so an optimal design is very important to achieve low-cost operation.

The following summarizes the main types of water heaters:

Traditional tank-type water heaters work with either gas or electricity. They offer a large volume of hot water that can be dispersed throughout your entire home, and typically keep the stored water at a temperature near 120°F at all times. Oil-fired models are also available but have a higher running cost than gas heaters and pollute more than other plumbing engineering solutions for water heaters.

Heat pumps also use a storage tank but differ from conventional electric heaters in the method used to raise water temperature. While conventional heaters apply voltage to an electric resistance, heat pumps are like a refrigerator operating in reverse: they cool the surrounding air to heat the water inside.

Tankless or demand-type water heaters do not store hot water, but rather heat it quickly on demand. These are also available in both gas-fired and electric versions.

How to Select a Water Heater

The selection process for a water heater depends on the specific subtype. For example, tankless heaters must be sized to provide rapid heating in short bursts, while storage heaters can provide a steadier and less intense heat output. Regardless of the type of heater chosen, consider that saving water also saves energy, since there are less gallons to heat per day.

1)   Tankless or Demand-Type Water Heater

The first step is to identify the required flowrate in gallons per minute (GPM). To provide an example, consider the following figures from 2010 plumbing standards:

  • Bath lavatory sink = 0.5 GPM
  • Standard shower = 2 to 2.5 GPM
  • Total demand = 3 GPM.

The next step is to determine the temperature rise needed, from the difference between the required water temperature and the incoming water temperature. In this example, if the required temperature is 110°F and the incoming temperature is 57°F, the temperature rise is:

  • Temperature rise = 110°F – 57°F = 53°F

In this application, it would be necessary to select a water heater that runs at 3 GPM with a 53°F heat rise. This is very different from conserving water at 110°F inside a tank, since the demand-type heater must achieve the full temperature rise the moment water flows through.

2) Storage-Type Water Heater

The design approach here is different, since this type of heater keeps a reservoir for when hot water is needed. Hot water demand is typically analyzed in gallons per hour (GPH) instead of gallons per minute (GPM). Normally, GPH values come from local plumbing codes, while demand factors and storage factors for commercial and residential occupancies are mentioned in ASHRAE Codes.

Consider the following example:

  • Hot water demand = 492 GPH
  • Demand factor = 0.3 (for private residences per ASHRAE)
  • Storage factor = 0.7 (for private residences per ASHRAE)
  • Temperature rise (ΔT) = 100°F

The first step is to determine the required recovery rate, which describes how many gallons of water must be handled by the heater per hour. This value is obtained by multiplying the total hot water demand and the demand factor:

  • Recovery rate = 492 GPH x 0.3 = 147.6 GPH

The actual heat input is calculated as follows:

  • Heat input (BTU/H) = Recovery Rate (GPH) x ΔT (°F) x Specific Heat (BTU/gal °F)
  • Heat input (BTU/H) = 147.6 GPH x 100°F x 8.33 BTU/gal °F = 122,950.8 BTU/H
  • Heat input (BTU/H) = 123 MBTU/H (thousand BTU per hour)

The required capacity of the tank is determined by the storage factor:

  • Tank capacity = Recovery Rate x Storage Factor
  • Tank capacity (gal) = 147.6 GPH x 0.7 = 103 gal

In this application, the water heater must have a capacity of 123 MBTU/H at 100°F temperature rise and a recovery rate of 147.6 GPH.

Advantages and Disadvantages of Each Heater Type in Plumbing Engineering

Like with any engineering decision, water heaters come with distinct advantages and disadvantages. This section summarizes the strong points of each technology, as well as the limitations.

Storage-type Water Heater

Advantages:

  • Lower initial cost – A traditional water heater can cost half as much as a tankless water heater.
  • Easy and inexpensive to replace – A simpler installation means there’s less that can go wrong. Maintenance and reparations have a lower cost.

Disadvantages:

  • Higher utility bill – Water is heated and reheated at a preset temperature regardless of your hot water needs. This increases your utility bill, especially during the winter.
  • Space requirements – They occupy more room and can’t be placed outside.
  • Can run out of hot water – Ever been the last in your family to get the shower? It’s a chilling experience. This problem can be avoided by purchasing a larger tank, but this also leads to more energy costs because a larger volume of water must be kept hot.
  • Shorter service life – This type of heater lasts 10-15 years. As a result you have to buy them twice as often as tankless water heaters.

Tankless Water Heater

Advantages:

  • Saves money in the long run – For homes that use below 41 gallons of hot water per day, demand-type water heaters can be 24–34% more energy efficient than conventional storage heaters.
  • Compact and versatile – They are small and can be installed in more places compared with storage heaters, even outside a wall.
  • Longer service life – Last 20 years or more, almost doubling a traditional water heater’s service life.
  • Deliver hot water on demand – Tankless heaters provide two to three gallons of hot water per minute on demand. This can up to 5 GPM with gas-fired heaters.

Disadvantages:

  • Higher initial cost – Cost between $2800 to $4500 installed, depending on the model and supplier.
  • Retrofitting adds to upfront cost – Replacing a traditional water heater with a tankless system is more complicated, since the capacity of the electric or gas service entrance must be increased in most cases.

Which Are The Best Applications for Each Type of Heater?

Storage-type water heaters tend to work best when demand for hot water is constant and fluctuating, where low-demand periods can be used to replenish the tank. Some examples of suitable applications are restaurants, commercial areas, residential apartments and hotels.

Tankless water heaters are better suited for applications where the demand of hot water is well-known and occurs occasionally in short bursts. Some suitable applications are remote bathrooms and hot tubs. These heaters are also useful as boosters for dishwashers, clothes washers and other similar appliances. They can also complement solar water heaters that are unable to meet hot water demand by themselves.

If you are considering a new domestic hot water system, the best recommendation is to get professional assistance. A plumbing engineering professional will help ensure the DHW system will be adequate for the needs of your building.

Popular searches related to Electrical Engineering in Budlong Woods Chicago, IL.

Value Engineering Architecture

(MEP) Engineering Service in Budlong Woods Chicago

MEP Engineers Budlong Woods Chicago! When you re searching for a reliable MEP Firms in Chicago? The one to go to is is NY-Engineers.Com. Not only for MEP Engineering in Chicago but also Construction Engineering and Protection Engineering near Budlong Woods Chicago. Contact us at (+1) 312 767-6877 The great majority of general contractors throughout Bay Shore, NY have come to depend on New York Engineers for a wide range of [...]

2018-09-13T03:33:06+00:00