MEP Engineering Services in Chicago, Illinois.

Structural Engineering Near Me

Real estate investors throughout Ithaca, New York have come to depend on NY Engineers for a wide range of engineering services ranging from Electrical Engineering to Value Engineering. For this reason real estate investors in Chicago will tell you that if you’re seeking a dependable MEP Engineering firm in Chicago, Illinois you should consider New York Engineers.

Odds are, you have walked through any particular form of building and observed the results of MEP Engineering. To put it simply, MEP centers on the mechanical, electrical and plumbing elements of engineering. Essentially, MEP already gives a clue to the most frequent and correct guess of precisely what is MEP. Our article goes into some details of what is MEP Engineering.

So far as the mechanical part is involved, both for commercial and residential engineering, this deals with anything that moves. Additionally its involves the usage of complex and easy machines along with other mechanical mechanisms to execute certain tasks. Some normal mechanical engineering tasks which is often noticed everyday are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems which deal with improving the energy productivity.

The electrical element of construction is centered on the functions, components, electrical safety, and more importantly, the wiring of any building. Engineers in this section go to great lengths to make certain that the layout of a building are meant to deliver sufficient power to every component in a safe manner ensuring that every one of the electrical codes are followed. Some common electrical engineering jobs may be found in the lighting design, regulating the voltage and distributing the electricity to each component within the structure which requires a supply.

With regards to plumbing, there may be a wide array of plumbing factors that constitute the final model of any structure. Plumbing engineering goes deeper than only faucets, toilets, and sinks, and holds several behind the scene equipments. These being the sewage and drainage lines as well as the buildings domestic water supply and how it flows.

As we conclude this article we have just reviewed what is MEP Engineering. MEP Engineering is administered inside the construction industry. And, supports completing the easily ignored technical elements of any building.

Hiring an MEP Engineering Firm in Chicago is Essential for Large Construction Projects

Hiring an MEP engineering company in Ravenswood Gardens Chicago, ILO, might have everything to do with the success of your construction project. These pros can help offset the price of making such a hiring decision when it comes to energy saving alone. When you find yourself referring to large commercial structures, energy management is a crucial topic of discussion. It’s time to discover various other great factors behind using MEP engineers in Greektown Chicago, ILO.

Engineers have a lot to do with the physical reliability of any building. As you can well imagine, this means the unseen is extreamly vital. Design not merely deals in looks but the basis of a building and its mechanism. That is certainly yet another solid logic why using an MEP engineering company will likely be beneficial to any project.

Think about every one of the pipes and plumbing. Take into account the heating and cooling systems and the importance of getting all of its components inside the right places. Energy maintenance was stated, and energy efficiency is an additional important term to mention. Energy efficiency is related to your HVAC system, and it plays an important part in energy conservation overall.

Think about your building’s shell. Consider the installation of security systems and also the security and safety measures set up through the entire structure. With everything else talked about thus far, it’s reliable advice that a great many elements of building construction might be either ignored or minimized short of MEP engineers on the job.

Now with all you know you are going to look to get the best MEP engineering firm in the market, right? It is very obvious the best engineers have to be involved in the massive construction of commercial buildings. Customised is the proper term to work with to illustrate the way in which these engineers will adapt a construction job to meet the needs of your respective operations. There’s only so much you can save this page if you would like additional information on the MEP Engineering services in Chicago, IL by New York Engineers we invite you to visit at our blog.

Mechanical Engineering Related Blog

Heating and Cooling Upgrades: Where to Start? Architectural Engineers Have This Advice

Electrical Engineering Information

Space heating represents the highest energy use in many buildings. In addition, domestic hot water and space cooling systems use less energy than space heating, but they are also among the top five building systems that use the most energy. According to architectural engineers, a building can reduce its energy consumption dramatically by replacing its existing heating and cooling systems with modern and high-efficiency equipment.

However, before proceeding with a large-scale building upgrade it is necessary to define a starting point. Building upgrades are investments after all, where the property owner spends capital with the goal of achieving a permanent reduction in building ownership cost. In other words, building system upgrades only make sense from the financial standpoint if the long-term benefit outweighs the associated upfront expenses.

Is There an Upcoming Major Renovation?

Heating and cooling upgrades provide long-term benefits but can be disrupting for building operation. If a major renovation is planned in the short term, it represents an excellent chance to also improve HVAC performance.

A major renovation also provides an excellent chance to improve the building envelope, architectural engineers advise. Poor insulation and air leaks can be detected and fixed, reducing the required heating and cooling capacity after the renovation. This way, the new heating and cooling systems can be specified not only with a higher efficiency, but also with a lower capacity.

  • For example, if you replace a 100-ton air-cooled chiller consuming 1.2 kW/ton with a more efficient water-cooled unit that only uses 0.6 kW/ton, you achieve 50% energy savings.
  • However, if the new unit has a required capacity of only 80 tons thanks to building envelope improvements, energy savings are increased to 60%.

A building envelope improvement can be complemented with a lighting system upgrade. Solid-state LED lighting emits significantly less heat than incandescent, halogen or old fluorescent lighting. All this heat is subtracted from space cooling loads, providing additional energy savings beyond those achieved directly with the lighting upgrade.

Consider that a 60-watt incandescent bulb can generally be replaced with a 10-watt LED bulb, and a 4-lamp T12 fluorescent fixture (4x 34W) can generally be replaced with an integral LED fixture consuming 40-45W. The lighting heat reduction is not significant for a single fixture, but can save several tons of cooling capacity in a building with hundreds of inefficient fixtures.

Building Upgrades: Cost and Benefit

When upgrading a building it can be tempting to prioritize space heating systems, since they consume the most energy. However, it is also important to consider the energy source used by each appliance.

For a given amount of energy delivered, electricity is far more expensive than gas in major cities. Natural gas from Con Edison has a price of around 1.05 USD per therm for residential users, which translates to approximately 3.6 cents per kWh of heat, before considering appliance efficiency. On the other hand, electricity prices typically exceed 20 cents per kWh. Even if most combustion appliances are less efficient than electric appliances, the price of electricity is too high compared with that of gas. This effect is evident in electric resistance heaters, which are around four times more expensive to operate than gas heaters.

Property owners can achieve the best results by getting a professional energy audit before deciding which building upgrades to carry out. With an energy audit, property owners can get a detailed breakdown of energy efficiency measures, along with the expected cost of each. More importantly, an energy audit helps determine the return on investment for each energy efficiency measure – how many dollars will it return over its service life for each dollar spent upfront? Given the price gap between electricity and gas, upgrades that target electric system generally offer a shorter payback period and a higher ROI.

Before proceeding with any building upgrade, checking the Con Edison incentive program is highly advised. Many energy efficiency measures are eligible for attractive cash rebates, which further improves their financial performance. Consider that some rebate programs only apply during certain times of the year or have limited funding, so building upgrades should be planned accordingly.

Importance of Building Type to Architectural Engineers

Not all buildings consume energy the same way. For example, mechanical ventilation typically represents around 13% of energy use in office buildings, but only 1% in multifamily residential settings. This is a consequence of the requirements established by construction codes for each property type – natural ventilation design is mandatory in residential constructions, but designers can choose between natural and mechanical ventilation for office buildings. Domestic hot water systems experience the opposite effect as ventilation systems, representing only 2% of energy use in office buildings but 19% in multi-family residential buildings.

Differences like this are present for many building systems. For example, office occupancy is normally higher than residential occupancy during the day, which extends lighting and space cooling schedules for office buildings, and the corresponding energy expense. However, this does not mean lighting and cooling upgrades should be discarded in the residential sector: these systems represent a reduced percentage of energy consumption but are typically older than those found in office buildings, which can result in an attractive financial return.

Final Recommendations

When deciding which cooling and heating upgrades to prioritize, it is very important to select an adequate time frame for the project, and getting an energy audit to determine the cost and benefit of each measure. Ideally, deep retrofits should be scheduled along with major renovations to minimize disruption and cost. It is also important to find synergy between upgrades, for example when both lighting and space cooling are upgraded. Of course, the financial return is also a very important consideration: as a property owner you will want to prioritize measures that maximize the return on each dollar invested.

In general, energy efficiency measures that target electric systems will have a better financial performance than those targeting gas-fired systems. Nevertheless, there are exceptions to this; an energy audit of the building is the best way to tell, agree experienced architectural engineers.

Common searches related to Energy Modeling in Chicago, IL.

Electrical Engineering Schools

(MEP) Engineering Service in Chicago

How Can Our Chicago MEP Engineers Help You! A great number of real estate investors throughout Coram, NY have come to rely on New York Engineers for a wide range of engineering services ranging from Plumbing Engineering to Building Commissioning. For this reason developers in Chicago will tell you that if you are seeking a dependable MEP Engineering firm in Chicago, Illinois you need to consider NY Engineers. A MEP engineer, or [...]

2018-09-20T19:45:24+00:00