MEP Service in Des Plaines, IL.

Contact Us

Looking for a top MEP Firms in Chicago? Your best bet is to call is NY-Engineers.Com. Not only for MEP Engineering in Chicago but also Value Engineering and Sprinkler Design Engineering in Des Plaines. Call (+1) (312) 767-6877

Contact Us
MEP Engineering Courses

Developers throughout Lake Ronkonkoma, New York have come to depend on New York Engineers for a wide range of engineering services ranging from Plumbing Engineering to Value Engineering. This is why property owners in Des Plaines will tell you that if you are seeking a top-rated MEP Engineering firm in Des Plaines, Illinois you need to consider New York Engineers.

Odds are, you have walked into any particular kind of building and witnessed the outcomes of MEP Engineering. Simply put, MEP centers in the mechanical, electrical and plumbing facets of engineering. Essentially, MEP already gives a clue to the most prevalent and precise notion of precisely what is MEP. This article goes into some infor of what is MEP Engineering.

As far as the mechanical part is involved, for residential and commercial engineering, this works with anything that moves. Additionally its entails the usage of complex and easy machines as well as other mechanical mechanisms to do certain tasks. Some ordinary mechanical engineering jobs which is often noticed regularly are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems that cope with enhancing the energy productivity.

The electrical element of construction is centered on the components, functions, electrical safety, and more importantly, the wiring of the building. Engineers in this department try very hard to make sure that the schematics of the building are created to deliver sufficient electricity to every individual component in a safe manner ensuring that each of the electrical codes are met. Some familiar electrical engineering tasks can be found in the lighting design, modifying the voltage and allocating the energy to each component within the building that demands a supply.

In terms of plumbing, there may be a wide array of plumbing components which constitute the final model of any structure. Plumbing engineering goes deeper than only sinks, faucets, and toilets, and houses several behind the scene appliances. These being the sewage and drainage lines as well as the buildings household water supply and how it flows.

As we conclude this article we certainly have just checked out what is MEP Engineering. MEP Engineering is managed inside the construction industry. And, helps with completing the simply unnoticed technical elements of any building.

Hiring an MEP Engineering Firm in Des Plaines is Important for Huge Construction Projects

Hiring an MEP engineering firm in Chrysler Village Chicago, Illinois, might have a whole lot to do with the prosperity of your construction project. These specialists may help offset the expense of making this type of hiring decision in relation to energy upkeep alone. When you find yourself speaking about big commercial buildings, energy management is a crucial topic of discussion. It’s time to discover some other great causes of employing MEP firm in Nortown Chicago, IL.

Engineers have a lot to do with the physical integrity of your building. If you can well envision, it means the unseen is very vital. Design not just deals in aesthetics but the base of a building also its workings. That may be yet another solid good reason that hiring an MEP engineering company will be helpful to your project.

Think about each of the pipes and plumbing. Consider the air conditioning systems and how important it is to get all its components in the correct places. Energy maintenance was discussed, however energy efficiency can be another vital term to bring up. Energy efficiency concerns your HVAC system, and it plays a vital part in energy conservation overall.

Think about your building’s shell. Consider the installation of home security systems along with the safety and security measures set up throughout the structure. With everything else discussed thus far, it’s safe to say that numerous elements of building construction can be either ignored or minimized without MEP engineers at work.

Now with all you know you will look for the very best MEP engineering firm in the industry, right? It is pretty obvious that the best engineers need to be active in the large building of commercial structures. Personalized is the best term to work with to illustrate how these experts will covert a construction job to meet the needs of the operations. There’s only so much you can save this page if you would like more details on the MEP Engineering services in Des Plaines, Illinois by NY-Engineers.Com you should take a look at our Des Plaines CAD to Revit Modeling blog.

New CAD to Revit Modeling Related Blog

How MEP Engineers Explain Radiant Floor Heating and Its Benefits

Mechanical Engineers

Radiant floor heating consists of delivering heat through the existing floor surface, as opposed to using air ducts or baseboard heaters. The upfront cost of radiant floor heating is generally higher than that of other systems, since it is necessary for MEP engineers to install hot water piping or electrical wiring under the floor. However, this is compensated by improved comfort and energy efficiency.

According to the US Department of Energy, space heating is the highest energy expense in American households and represents around 45% of energy bills on average. Therefore, any improvements to heating performance and efficiency can yield an attractive return on investment.

How MEP Engineers Classify Radiant Floor Heating Systems

Most radiant floor heating systems are either hydronic, which rely on hot water piping; or electric, which use wiring or conductive mats under the floor. Air-heated installations also exist, but they suffer from a very low efficiency without offering any significant advantages. Radiant floor heating systems can also be classified based on their construction:

  • In wet installations, hydronic piping or electrical wiring is embedded directly in a concrete floor, or any other solid mass than can hold and emit large amounts of heat. It is important to note that “wet installation” is not a literal term: the hot water stays inside hydronic piping, releasing only its heat.
  • In dry installations, on the other hand, piping and cables are installed in an empty space between floor layers or below the floor, but are not embedded.

Deciding which heat source and system construction to use is a matter of cost and benefit that should be analyzed by MEP engineers.

For example, an electric radiant heating system of dry construction will generally be the cheapest but least efficient option. On the other hand, an embedded hydronic system is likely to have the highest upfront cost but also the lowest operating cost.

Energy Sources for Radiant Floor Heating

The heat sources available depend on the type of heating system. Hydronic radiant heating is the most versatile option because any energy source capable of heating water is viable; the system can run with electricity, natural gas, oil, propane, biomass or solar radiation. Electric radiant heating systems are much more limited, since their design only allows resistance-based heating.

Hydronic Radiant Floor Heating

As previously stated, the main advantages of this configuration are versatility and energy efficiency. Homeowners with hydronic radiant heating can choose from a wide variety of energy sources:

  • Boilers: These can be fired by natural gas, propane, oil or biomass, allowing their owners to choose the cheapest option at their location. Electric resistance boilers can also be used, but their high operating cost negates the efficiency benefit of radiant heating.
  • Heat Pumps: They are a cost-effective alternative to electric resistance boilers. Although they also run with electricity, but can match the output of an equivalent resistance heater with just a fraction of the energy input. In many cases, heat pumps can compete with gas boilers due to their superior efficiency.
  • Solar Collectors: Water heated by a solar collector can be used directly in a hydronic radiant heating system. If the available solar radiation is not enough to meet the heating load completely, the system can be complemented with a boiler or heat pump. Solar collectors can achieve excellent results when hydronic piping is embedded in a concrete slab, since it essentially allows energy from the sun to be stored thermally for nighttime heating.

An engineering consultant or design firm can help you determine the best option for your home, depending on your needs and site conditions. For instance, solar collectors are not viable if your rooftop has shading issues, and gas boilers can be very expensive to install if your property lacks a chimney or service entrance of enough capacity.

Another advantage of hydronic heating systems is that a central heating unit can be used for both water and space heating, consolidating two building systems and reducing their total cost.

Electric Radiant Floor Heating

This system configuration is characterized by a simple and cheap installation, but also a very high operating cost. No central boiler or heating unit is required: electric current is carried by wiring, and heat is generated locally. This type of system can be cost-effective when electricity rates are low and heating is used for only a few months each year, but this is not always the case.

Some electric radiant heating systems use conductive mats instead of wiring. The basic operating principle is the same, but heat distribution is improved.

Comfort and Health Advantages of Radiant Floor Heating

Radiant floor heating systems offer comfort and health benefits that apply regardless of the energy source and system construction.

Improved Comfort

Radiant heating systems operate without blowers and ducts, creating a uniform heat distribution throughout indoor spaces. Heat is radiated from the floor, and then distributed by natural air convection. This eliminates some issues that are common in forced-air systems and cause discomfort:

  • Uneven heat distribution
  • Noisy ducts
  • Draftiness

Health and Air Quality Benefits

Another advantage of radiant floor heating systems is that they can’t distribute allergens, volatile organic compounds (VOCs) or airborne germs because there is no forced air circulation. In addition, the ventilation system becomes independent from heating and can be designed specifically for indoor air quality.

Disadvantages of Radiant Floor Heating

As in all engineering decisions, radiant floor heating is not free from limitations: it generally comes with a higher price tag, and responds more slowly than other types of heating systems.

The cost of radiant floor heating can be very high in existing buildings, since it is necessary to embed a new system within the existing floor. The installation is even more expensive if an embedded system will be used, since it is necessary to pour a new concrete slab. Radiant floor heating is much more affordable in new construction, where floor installation costs are already part of the project baseline and it is only necessary to add one extra element.

Another disadvantage of radiant floor heating systems is that they take longer to heat an indoor space, compared with forced-air systems. However, this can be easily compensated with automation: smart thermostat can be configured to preheat rooms when the lowest hourly electricity rates are being applied, saving energy in the process!

General Recommendations for Radiant Floor Heating Systems

The choice of construction materials is very important when dealing with radiant floor heating. The Department of Energy recommends the use of ceramic tiles instead of wood, since ceramic can hold and emit heat more effectively. On the other hand, wood is essentially a form of insulation and it reduces system efficiency. Another disadvantage of wood floors is that they can crack in response to temperature changes.

Another recommendation offered by MEP engineers, which applies not only for radiant floor heating but for any HVAC upgrade, is to improve the building envelope before sizing the new equipment. This way, heating and cooling loads are reduced and the new equipment can be sized smaller, increasing the energy-saving potential.

Popular searches related to Plumbing Engineering in Des Plaines, Illinois.

Electrical Engineering Schools

(MEP) Engineering Service in Des Plaines

MEP Firm Des Plaines! If you re searching for a dependable MEP Firms in Chicago? Your best bet is to contact is NY Engineers. Not only for MEP Firms in Chicago but also Architectural Engineering and Protection Engineering throughout Des Plaines. Call us at (+1) 312 767.6877 Many building owners throughout Elmira, NY have come to rely on New York Engineers for a wide range of engineering services ranging from Plumbing [...]

2018-08-26T00:35:40+00:00