MEP Service in Dixmoor, Illinois.

Contact Us

Searching for a top rated MEP Chicago? The one to go to is New York Engineers. Not only for MEP Chicago but also Mechanical Engineering and Sprinkler Design Engineering near Dixmoor. Call us at (+1) 312 767.6877

Contact Us
MEP Engineering Firms Near Me

Building owners throughout Levittown, NY have come to rely on NY-Engineers.Com for a wide range of engineering services ranging from Electrical Engineering to CAD to Revit Modeling. That is why real estate investors in Dixmoor will tell you that if you are searching for a dependable MEP Engineering firm in Dixmoor, Illinois you need to consider New York Engineers.

It is very possible, you have walked into any particular sort of building and observed the outcome of MEP Engineering. Basically, MEP centers around the mechanical, electrical and plumbing facets of engineering. In simple terms, the name already gives a clue to the most prevalent and accurate theory of precisely what is MEP. This article goes into some information on what is MEP Engineering.

So far as the mechanical aspect is involved, both for commercial and residential engineering, this handles anything which moves. Additionally its entails the use of complex and uncomplicated machines together with other mechanical mechanisms to execute certain tasks. Some common mechanical engineering tasks which can be noticed regularly are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems that cope with boosting the energy efficiency.

The electrical facet of construction is centered on the electrical safety, functions, components, and more importantly, the wiring associated with a building. Engineers in this particular branch try very hard to make sure that the schematics of your building are meant to bring ample electricity to every individual component in a safe manner where each of the electrical codes are met. Some familiar electrical engineering functions can be found in the lighting design, regulating the voltage and distributing the energy to every single component within the structure which needs a supply.

plumbing, there is a wide array of plumbing components which constitute the final form of any building. Plumbing engineering goes deeper than merely toilets, faucets, and sinks, and houses several behind the scene devices. These being the drainage line and sewage along with the buildings household water supply and the way it flows.

As we conclude this article we certainly have just considered what is MEP Engineering. MEP Engineering is managed inside the construction industry. And, assists in completing the easily unnoticed technical aspects of any building.

Hiring an MEP Engineering Firm in Dixmoor is Essential for Major Construction Projects

Using an MEP engineering company in New Chinatown Chicago, Illinois, might have everything to do with the safety of your construction project. These professionals might help offset the price of making such a hiring decision when it comes to energy conservation alone. While you are talking about huge commercial structures, energy conservation is a crucial topic of discussion. It’s time to learn various other great reasons behind employing MEP engineering firm in Groveland Park Chicago, IL.

Engineers play an important role in the structural reliability of any building. As you may well envision, that means the unseen is very essential. Design not only deals in looks but the groundwork of a building and its mechanism. Which is merely another solid reason why employing an MEP engineering company is going to be beneficial to any project.

Think about all the pipes and plumbing. Look at the cooling and heating systems and the importance of getting all of its mechanics inside the right places. Energy maintenance was discussed, and energy efficiency can be another vital term to discuss. Energy efficiency has everything to do with your HVAC system, and it plays a huge part in energy saving overall.

Take into consideration your building’s footing. Consider setting up security alarms as well as the safety and security measures set up through the structure. With everything described so far, it’s safe to say that many elements of building construction might be either disregarded or underestimated without MEP experts on the job.

Now with all you know you are going to look to find the best MEP engineering company available, right? It is pretty clear that this best engineers must be working in the massive building of commercial structures. Customized is definitely the correct term to work with to describe the way in which these experts will customize a construction project to meet the needs of the operations. There is a great possibility you would like additional information about the MEP Engineering services in Dixmoor, IL by NY-Engineers.Com you should check out at our Dixmoor Construction Administration blog.

New CAD to Revit Modeling Related Post

A Plumbing Engineering Expert Explains Storage and Demand-Type Water Heaters

Fire Protection Engineering Companies

Water heaters are household appliances that normally use natural gas or electricity to produce heat, and often include a tank to store hot water. These plumbing engineering systems provide a very important service for modern society, especially in locations with cold winters. Water heaters represent a significant portion of building energy expenses, so an optimal design is very important to achieve low-cost operation.

The following summarizes the main types of water heaters:

Traditional tank-type water heaters work with either gas or electricity. They offer a large volume of hot water that can be dispersed throughout your entire home, and typically keep the stored water at a temperature near 120°F at all times. Oil-fired models are also available but have a higher running cost than gas heaters and pollute more than other plumbing engineering solutions for water heaters.

Heat pumps also use a storage tank but differ from conventional electric heaters in the method used to raise water temperature. While conventional heaters apply voltage to an electric resistance, heat pumps are like a refrigerator operating in reverse: they cool the surrounding air to heat the water inside.

Tankless or demand-type water heaters do not store hot water, but rather heat it quickly on demand. These are also available in both gas-fired and electric versions.

How to Select a Water Heater

The selection process for a water heater depends on the specific subtype. For example, tankless heaters must be sized to provide rapid heating in short bursts, while storage heaters can provide a steadier and less intense heat output. Regardless of the type of heater chosen, consider that saving water also saves energy, since there are less gallons to heat per day.

1)   Tankless or Demand-Type Water Heater

The first step is to identify the required flowrate in gallons per minute (GPM). To provide an example, consider the following figures from 2010 plumbing standards:

  • Bath lavatory sink = 0.5 GPM
  • Standard shower = 2 to 2.5 GPM
  • Total demand = 3 GPM.

The next step is to determine the temperature rise needed, from the difference between the required water temperature and the incoming water temperature. In this example, if the required temperature is 110°F and the incoming temperature is 57°F, the temperature rise is:

  • Temperature rise = 110°F – 57°F = 53°F

In this application, it would be necessary to select a water heater that runs at 3 GPM with a 53°F heat rise. This is very different from conserving water at 110°F inside a tank, since the demand-type heater must achieve the full temperature rise the moment water flows through.

2) Storage-Type Water Heater

The design approach here is different, since this type of heater keeps a reservoir for when hot water is needed. Hot water demand is typically analyzed in gallons per hour (GPH) instead of gallons per minute (GPM). Normally, GPH values come from local plumbing codes, while demand factors and storage factors for commercial and residential occupancies are mentioned in ASHRAE Codes.

Consider the following example:

  • Hot water demand = 492 GPH
  • Demand factor = 0.3 (for private residences per ASHRAE)
  • Storage factor = 0.7 (for private residences per ASHRAE)
  • Temperature rise (ΔT) = 100°F

The first step is to determine the required recovery rate, which describes how many gallons of water must be handled by the heater per hour. This value is obtained by multiplying the total hot water demand and the demand factor:

  • Recovery rate = 492 GPH x 0.3 = 147.6 GPH

The actual heat input is calculated as follows:

  • Heat input (BTU/H) = Recovery Rate (GPH) x ΔT (°F) x Specific Heat (BTU/gal °F)
  • Heat input (BTU/H) = 147.6 GPH x 100°F x 8.33 BTU/gal °F = 122,950.8 BTU/H
  • Heat input (BTU/H) = 123 MBTU/H (thousand BTU per hour)

The required capacity of the tank is determined by the storage factor:

  • Tank capacity = Recovery Rate x Storage Factor
  • Tank capacity (gal) = 147.6 GPH x 0.7 = 103 gal

In this application, the water heater must have a capacity of 123 MBTU/H at 100°F temperature rise and a recovery rate of 147.6 GPH.

Advantages and Disadvantages of Each Heater Type in Plumbing Engineering

Like with any engineering decision, water heaters come with distinct advantages and disadvantages. This section summarizes the strong points of each technology, as well as the limitations.

Storage-type Water Heater

Advantages:

  • Lower initial cost – A traditional water heater can cost half as much as a tankless water heater.
  • Easy and inexpensive to replace – A simpler installation means there’s less that can go wrong. Maintenance and reparations have a lower cost.

Disadvantages:

  • Higher utility bill – Water is heated and reheated at a preset temperature regardless of your hot water needs. This increases your utility bill, especially during the winter.
  • Space requirements – They occupy more room and can’t be placed outside.
  • Can run out of hot water – Ever been the last in your family to get the shower? It’s a chilling experience. This problem can be avoided by purchasing a larger tank, but this also leads to more energy costs because a larger volume of water must be kept hot.
  • Shorter service life – This type of heater lasts 10-15 years. As a result you have to buy them twice as often as tankless water heaters.

Tankless Water Heater

Advantages:

  • Saves money in the long run – For homes that use below 41 gallons of hot water per day, demand-type water heaters can be 24–34% more energy efficient than conventional storage heaters.
  • Compact and versatile – They are small and can be installed in more places compared with storage heaters, even outside a wall.
  • Longer service life – Last 20 years or more, almost doubling a traditional water heater’s service life.
  • Deliver hot water on demand – Tankless heaters provide two to three gallons of hot water per minute on demand. This can up to 5 GPM with gas-fired heaters.

Disadvantages:

  • Higher initial cost – Cost between $2800 to $4500 installed, depending on the model and supplier.
  • Retrofitting adds to upfront cost – Replacing a traditional water heater with a tankless system is more complicated, since the capacity of the electric or gas service entrance must be increased in most cases.

Which Are The Best Applications for Each Type of Heater?

Storage-type water heaters tend to work best when demand for hot water is constant and fluctuating, where low-demand periods can be used to replenish the tank. Some examples of suitable applications are restaurants, commercial areas, residential apartments and hotels.

Tankless water heaters are better suited for applications where the demand of hot water is well-known and occurs occasionally in short bursts. Some suitable applications are remote bathrooms and hot tubs. These heaters are also useful as boosters for dishwashers, clothes washers and other similar appliances. They can also complement solar water heaters that are unable to meet hot water demand by themselves.

If you are considering a new domestic hot water system, the best recommendation is to get professional assistance. A plumbing engineering professional will help ensure the DHW system will be adequate for the needs of your building.

Popular searches related to Construction Administration in Dixmoor, IL.

MEP Consulting Engineers Reviews

(MEP) Engineering Service in Dixmoor

MEP Engineers Dixmoor! If you're looking for a competent MEP Chicago in Firm? Your best bet is to contact is NY Engineers. Not only for MEP Chicago but also HVAC Engineering and Sprinkler System Engineering throughout Dixmoor. Contact us at (+1) (312) 767.6877 Several building owners throughout Copiague, New York have come to depend on New York Engineers for a wide range of engineering services ranging from Sprinkler Engineering to Utility [...]

2018-09-14T22:22:51+00:00