MEP Service in East Hazel Crest, Illinois.

Contact Us

Searching for the best MEP Firms in Chicago? The one to go to is NY-Engineers.Com. Not only for MEP Firms in Chicago but also Architectural Engineering and Sprinkler Engineering near East Hazel Crest. Call us at (312) 767.6877

Contact Us
Fire Protection Engineer Certification

Construction companies throughout Massapequa, New York have come to depend on New York Engineers for a wide range of engineering services ranging from Mechanical Engineering to Engineering Reports. For this reason building owners in East Hazel Crest will tell you that if you’re looking for a excellent MEP Engineering firm in East Hazel Crest, IL you need to consider NY-Engineers.Com.

Chances are, you may have walked through any specific type of building and seen the final results of MEP Engineering. Basically, MEP centers in the mechanical, electrical and plumbing aspects of engineering. Basically, the name already gives a clue to the most typical and spot-on guess of what exactly is MEP. Our article should go into some information on what is MEP Engineering.

So far as the mechanical side is concerned, both for residential and commercial engineering, this handles anything that moves. Furthermore its involves the use of complex and easy machines along with other mechanical mechanisms to carry out certain tasks. Some normal mechanical engineering jobs that can be noticed everyday are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems that cope with increasing the energy efficiency.

The electrical element of construction is centered on the components, functions, electrical safety, and above all, the wiring of the building. Engineers within this sector go to great lengths to ensure that the layout of your building are designed to provide enough power to each individual component in a safe manner where all the electrical codes are met. Some familiar electrical engineering tasks are available in the lighting design, modifying the voltage and allocating the energy to each component within the building which requires a supply.

So far as plumbing, there may be a variety of plumbing components which make up the final style of any building. Plumbing engineering goes deeper than simply faucets, toilets, and sinks, and houses many behind the scene equipments. These being the drainage line and sewage and also the buildings household water supply and how it flows.

As we conclude this article we have now just looked at what is MEP Engineering. MEP Engineering is administered in the construction industry. And, helps with completing the simply ignored technical aspects of any building.

Hiring an MEP Engineering Firm in East Hazel Crest is Necessary for Large Construction Projects

Using an MEP engineering company in Groveland Park Chicago, Illinois, could have a whole lot to do with the prosperity of your construction project. These specialists might help offset the price of making such a hiring decision with regards to energy upkeep alone. When you find yourself talking about large commercial structures, energy conservation is a vital topic of discussion. It’s time to learn a few other great factors behind using MEP engineering company in Heart of Chicago, Illinois.

Engineers play an important role in the physical integrity of the building. If you may well imagine, this means the unseen is extreamly important. Design not just deals in aesthetics but the underpinning of a building and its workings. Which is yet another solid good reason that employing an MEP engineering company will be good for your project.

Think of all the pipes and plumbing. Take into account the cooling and heating systems and how important it is to get all its components in the right places. Energy conservation was stated, and energy efficiency is an additional vital term to note. Energy competence is about your HVAC system, plus it plays an important role in energy conservation in general.

Think of your building’s foundation. Consider the installation of security systems and also the security and safety measures put in place throughout the structure. With everything else mentioned so far, it’s reliable advice that many facets of building construction could be either ignored or minimized short of MEP professionals on-the-job.

Now with all you have read you will be looking to get the best MEP engineering company in the business, right? It’s pretty clear the best engineers must be in the large scale construction of commercial buildings. Customised is the proper term to use to clarify the way these specilists will alter a construction job to meet the needs of your operations. Even with all of this information you would like more details on the MEP Engineering services in East Hazel Crest, Illinois by New York Engineers you should check out at our blog.

Latest Engineering Reports Related Article

How MEP Engineers Explain Radiant Floor Heating and Its Benefits

MEP Engineering Pdf

Radiant floor heating consists of delivering heat through the existing floor surface, as opposed to using air ducts or baseboard heaters. The upfront cost of radiant floor heating is generally higher than that of other systems, since it is necessary for MEP engineers to install hot water piping or electrical wiring under the floor. However, this is compensated by improved comfort and energy efficiency.

According to the US Department of Energy, space heating is the highest energy expense in American households and represents around 45% of energy bills on average. Therefore, any improvements to heating performance and efficiency can yield an attractive return on investment.

How MEP Engineers Classify Radiant Floor Heating Systems

Most radiant floor heating systems are either hydronic, which rely on hot water piping; or electric, which use wiring or conductive mats under the floor. Air-heated installations also exist, but they suffer from a very low efficiency without offering any significant advantages. Radiant floor heating systems can also be classified based on their construction:

  • In wet installations, hydronic piping or electrical wiring is embedded directly in a concrete floor, or any other solid mass than can hold and emit large amounts of heat. It is important to note that “wet installation” is not a literal term: the hot water stays inside hydronic piping, releasing only its heat.
  • In dry installations, on the other hand, piping and cables are installed in an empty space between floor layers or below the floor, but are not embedded.

Deciding which heat source and system construction to use is a matter of cost and benefit that should be analyzed by MEP engineers.

For example, an electric radiant heating system of dry construction will generally be the cheapest but least efficient option. On the other hand, an embedded hydronic system is likely to have the highest upfront cost but also the lowest operating cost.

Energy Sources for Radiant Floor Heating

The heat sources available depend on the type of heating system. Hydronic radiant heating is the most versatile option because any energy source capable of heating water is viable; the system can run with electricity, natural gas, oil, propane, biomass or solar radiation. Electric radiant heating systems are much more limited, since their design only allows resistance-based heating.

Hydronic Radiant Floor Heating

As previously stated, the main advantages of this configuration are versatility and energy efficiency. Homeowners with hydronic radiant heating can choose from a wide variety of energy sources:

  • Boilers: These can be fired by natural gas, propane, oil or biomass, allowing their owners to choose the cheapest option at their location. Electric resistance boilers can also be used, but their high operating cost negates the efficiency benefit of radiant heating.
  • Heat Pumps: They are a cost-effective alternative to electric resistance boilers. Although they also run with electricity, but can match the output of an equivalent resistance heater with just a fraction of the energy input. In many cases, heat pumps can compete with gas boilers due to their superior efficiency.
  • Solar Collectors: Water heated by a solar collector can be used directly in a hydronic radiant heating system. If the available solar radiation is not enough to meet the heating load completely, the system can be complemented with a boiler or heat pump. Solar collectors can achieve excellent results when hydronic piping is embedded in a concrete slab, since it essentially allows energy from the sun to be stored thermally for nighttime heating.

An engineering consultant or design firm can help you determine the best option for your home, depending on your needs and site conditions. For instance, solar collectors are not viable if your rooftop has shading issues, and gas boilers can be very expensive to install if your property lacks a chimney or service entrance of enough capacity.

Another advantage of hydronic heating systems is that a central heating unit can be used for both water and space heating, consolidating two building systems and reducing their total cost.

Electric Radiant Floor Heating

This system configuration is characterized by a simple and cheap installation, but also a very high operating cost. No central boiler or heating unit is required: electric current is carried by wiring, and heat is generated locally. This type of system can be cost-effective when electricity rates are low and heating is used for only a few months each year, but this is not always the case.

Some electric radiant heating systems use conductive mats instead of wiring. The basic operating principle is the same, but heat distribution is improved.

Comfort and Health Advantages of Radiant Floor Heating

Radiant floor heating systems offer comfort and health benefits that apply regardless of the energy source and system construction.

Improved Comfort

Radiant heating systems operate without blowers and ducts, creating a uniform heat distribution throughout indoor spaces. Heat is radiated from the floor, and then distributed by natural air convection. This eliminates some issues that are common in forced-air systems and cause discomfort:

  • Uneven heat distribution
  • Noisy ducts
  • Draftiness

Health and Air Quality Benefits

Another advantage of radiant floor heating systems is that they can’t distribute allergens, volatile organic compounds (VOCs) or airborne germs because there is no forced air circulation. In addition, the ventilation system becomes independent from heating and can be designed specifically for indoor air quality.

Disadvantages of Radiant Floor Heating

As in all engineering decisions, radiant floor heating is not free from limitations: it generally comes with a higher price tag, and responds more slowly than other types of heating systems.

The cost of radiant floor heating can be very high in existing buildings, since it is necessary to embed a new system within the existing floor. The installation is even more expensive if an embedded system will be used, since it is necessary to pour a new concrete slab. Radiant floor heating is much more affordable in new construction, where floor installation costs are already part of the project baseline and it is only necessary to add one extra element.

Another disadvantage of radiant floor heating systems is that they take longer to heat an indoor space, compared with forced-air systems. However, this can be easily compensated with automation: smart thermostat can be configured to preheat rooms when the lowest hourly electricity rates are being applied, saving energy in the process!

General Recommendations for Radiant Floor Heating Systems

The choice of construction materials is very important when dealing with radiant floor heating. The Department of Energy recommends the use of ceramic tiles instead of wood, since ceramic can hold and emit heat more effectively. On the other hand, wood is essentially a form of insulation and it reduces system efficiency. Another disadvantage of wood floors is that they can crack in response to temperature changes.

Another recommendation offered by MEP engineers, which applies not only for radiant floor heating but for any HVAC upgrade, is to improve the building envelope before sizing the new equipment. This way, heating and cooling loads are reduced and the new equipment can be sized smaller, increasing the energy-saving potential.

Popular searches related to Value Engineering in East Hazel Crest, Illinois.

MEP Engineering Firms Near Me

(MEP) Engineering Service in East Hazel Crest

MEP Engineers East Hazel Crest! When you're searching for a fast responding MEP Engineering in Chicago? The top choice is is NY Engineers. Not only for MEP Chicago but also Mechanical Engineering and Sprinkler System Engineering throughout East Hazel Crest. Call us at (+1) 312 767-6877 Quite a few real estate investors throughout Auburn, NY have come to rely on NY-Engineers.Com for a wide range of engineering services ranging from Plumbing [...]

2018-09-14T02:44:09+00:00