MEP Service in Elk Grove Village, Illinois.

Contact Us

Looking for MEP Chicago? Your best bet is to call is New York Engineers. Not only for MEP Engineering in Chicago but also Value Engineering and Sprinkler System Engineering near Elk Grove Village. Contact us at 312 767.6877

Contact Us
Importance Of Value Engineering

Construction companies throughout Coram, NY have come to depend on New York Engineers for a wide range of engineering services ranging from MEP Engineering to CAD to Revit Modeling. For this reason property owners in Elk Grove Village will tell you that if you’re searching for a top-rated MEP Engineering firm in Elk Grove Village, Illinois you need to consider NY-Engineers.Com.

It is very possible, you might have walked into any specific kind of building and observed the final results of MEP Engineering. To put it simply, MEP focuses in the mechanical, electrical and plumbing facets of engineering. In essence, MEP already gives a clue to the most frequent and spot-on guess of what is MEP. This article goes into some details of what is MEP Engineering.

As far as the mechanical side is concerned, for both residential and commercial engineering, this handles anything that moves. In addition its involves the use of complex and simple machines and also other mechanical mechanisms to carry out certain tasks. Some common mechanical engineering tasks which is often noticed daily are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems that deal with enhancing the energy productivity.

The electrical part of construction is centered on the functions, components, electrical safety, and most importantly, the wiring for any building. Engineers in this unit go to great lengths to ensure that the schematics of the building are created to provide sufficient electricity to every component in a safe manner where all the electrical codes are met. Some common electrical engineering jobs can be found in the lighting design, regulating the voltage and allocating the electricity to every single component inside the structure which demands a supply.

As far as plumbing, there is certainly a wide array of plumbing components which make up the final style of any building. Plumbing engineering goes deeper than merely toilets, faucets, and sinks, and accommodates many behind the scene devices. These being the drainage line and sewage and also the buildings household water supply and exactly how it flows.

As we wrap up our article we have now just considered what is MEP Engineering. MEP Engineering is managed within the construction industry. And, assists in completing the simply overlooked technical elements of any building.

Hiring an MEP Engineering Firm in Elk Grove Village is Essential for Major Construction Projects

Hiring an MEP engineering company in Pulaski Park Chicago, Illinois, might have everything to do with the achievements of your construction project. These professionals can help offset the cost of making this type of hiring decision in relation to energy conservation alone. When you find yourself referring to big commercial structures, energy conservation is really a topic of discussion. It’s time to learn some other great factors behind employing MEP engineering firm in Clearing West Chicago, Illinois.

Engineers play an important role in the physical reliability of the building. If you can well imagine, that means the hidden is extreamly important. Design not merely deals in aesthetics but the underpinning of a building and its components. That is certainly yet another solid logic why hiring an MEP engineering company is going to be good for any project.

Think of all of the pipes and plumbing. Think about the heating and air conditioning systems and how important it is to get all of its components in the correct places. Energy saving was discussed, but energy competence is yet another significant term to mention. Energy competence has everything to do with your HVAC system, plus it plays a huge role in energy conservation as a whole.

Consider your building’s foundation. Consider installing security alarms and the security and safety measures set up through the structure. With everything discussed to date, it’s safe to say that numerous areas of building construction can be either overlooked or underestimated short of MEP engineers on-the-job.

Now with all you know you will be looking to get the best MEP engineering firm in the industry, right? It is pretty obvious the best engineers need to be in the large building of commercial buildings. Personalized is definitely the proper term to make use of to describe how these experts will modify a construction project to meet the requirements of your operations. There is a great possibility you would like additional details about the MEP Engineering services in Elk Grove Village, Illinois by NY-Engineers.Com we invite you to stop by at our Elk Grove Village Fire Protection Engineering blog.

MEP Engineering Related Blog

Heating and Cooling Upgrades: Where to Start? Architectural Engineers Have This Advice

Mechanical Engineering Jobs

Space heating represents the highest energy use in many buildings. In addition, domestic hot water and space cooling systems use less energy than space heating, but they are also among the top five building systems that use the most energy. According to architectural engineers, a building can reduce its energy consumption dramatically by replacing its existing heating and cooling systems with modern and high-efficiency equipment.

However, before proceeding with a large-scale building upgrade it is necessary to define a starting point. Building upgrades are investments after all, where the property owner spends capital with the goal of achieving a permanent reduction in building ownership cost. In other words, building system upgrades only make sense from the financial standpoint if the long-term benefit outweighs the associated upfront expenses.

Is There an Upcoming Major Renovation?

Heating and cooling upgrades provide long-term benefits but can be disrupting for building operation. If a major renovation is planned in the short term, it represents an excellent chance to also improve HVAC performance.

A major renovation also provides an excellent chance to improve the building envelope, architectural engineers advise. Poor insulation and air leaks can be detected and fixed, reducing the required heating and cooling capacity after the renovation. This way, the new heating and cooling systems can be specified not only with a higher efficiency, but also with a lower capacity.

  • For example, if you replace a 100-ton air-cooled chiller consuming 1.2 kW/ton with a more efficient water-cooled unit that only uses 0.6 kW/ton, you achieve 50% energy savings.
  • However, if the new unit has a required capacity of only 80 tons thanks to building envelope improvements, energy savings are increased to 60%.

A building envelope improvement can be complemented with a lighting system upgrade. Solid-state LED lighting emits significantly less heat than incandescent, halogen or old fluorescent lighting. All this heat is subtracted from space cooling loads, providing additional energy savings beyond those achieved directly with the lighting upgrade.

Consider that a 60-watt incandescent bulb can generally be replaced with a 10-watt LED bulb, and a 4-lamp T12 fluorescent fixture (4x 34W) can generally be replaced with an integral LED fixture consuming 40-45W. The lighting heat reduction is not significant for a single fixture, but can save several tons of cooling capacity in a building with hundreds of inefficient fixtures.

Building Upgrades: Cost and Benefit

When upgrading a building it can be tempting to prioritize space heating systems, since they consume the most energy. However, it is also important to consider the energy source used by each appliance.

For a given amount of energy delivered, electricity is far more expensive than gas in major cities. Natural gas from Con Edison has a price of around 1.05 USD per therm for residential users, which translates to approximately 3.6 cents per kWh of heat, before considering appliance efficiency. On the other hand, electricity prices typically exceed 20 cents per kWh. Even if most combustion appliances are less efficient than electric appliances, the price of electricity is too high compared with that of gas. This effect is evident in electric resistance heaters, which are around four times more expensive to operate than gas heaters.

Property owners can achieve the best results by getting a professional energy audit before deciding which building upgrades to carry out. With an energy audit, property owners can get a detailed breakdown of energy efficiency measures, along with the expected cost of each. More importantly, an energy audit helps determine the return on investment for each energy efficiency measure – how many dollars will it return over its service life for each dollar spent upfront? Given the price gap between electricity and gas, upgrades that target electric system generally offer a shorter payback period and a higher ROI.

Before proceeding with any building upgrade, checking the Con Edison incentive program is highly advised. Many energy efficiency measures are eligible for attractive cash rebates, which further improves their financial performance. Consider that some rebate programs only apply during certain times of the year or have limited funding, so building upgrades should be planned accordingly.

Importance of Building Type to Architectural Engineers

Not all buildings consume energy the same way. For example, mechanical ventilation typically represents around 13% of energy use in office buildings, but only 1% in multifamily residential settings. This is a consequence of the requirements established by construction codes for each property type – natural ventilation design is mandatory in residential constructions, but designers can choose between natural and mechanical ventilation for office buildings. Domestic hot water systems experience the opposite effect as ventilation systems, representing only 2% of energy use in office buildings but 19% in multi-family residential buildings.

Differences like this are present for many building systems. For example, office occupancy is normally higher than residential occupancy during the day, which extends lighting and space cooling schedules for office buildings, and the corresponding energy expense. However, this does not mean lighting and cooling upgrades should be discarded in the residential sector: these systems represent a reduced percentage of energy consumption but are typically older than those found in office buildings, which can result in an attractive financial return.

Final Recommendations

When deciding which cooling and heating upgrades to prioritize, it is very important to select an adequate time frame for the project, and getting an energy audit to determine the cost and benefit of each measure. Ideally, deep retrofits should be scheduled along with major renovations to minimize disruption and cost. It is also important to find synergy between upgrades, for example when both lighting and space cooling are upgraded. Of course, the financial return is also a very important consideration: as a property owner you will want to prioritize measures that maximize the return on each dollar invested.

In general, energy efficiency measures that target electric systems will have a better financial performance than those targeting gas-fired systems. Nevertheless, there are exceptions to this; an energy audit of the building is the best way to tell, agree experienced architectural engineers.

Common searches related to Energy Modeling Elk Grove Village, Illinois.

Architectural Engineering Courses

(MEP) Engineering Service in Elk Grove Village

MEP Firm Elk Grove Village! When you're searching for a reliable MEP Firms in Chicago? Your best bet is to call is New York Engineers. Not only for MEP Chicago but also Value Engineering and Sprinkler Design Engineering near Elk Grove Village. Call us at (+1) (312) 767-6877 Quite a few builders throughout North Tonawanda, NY have come to rely on NY Engineers for a wide range of engineering services ranging [...]

2018-09-10T13:25:38+00:00