MEP Service in Elmwood Park Chicago, Illinois.

Contact Us

Looking for the top MEP Engineering in Chicago? Your best bet is to contact is New York Engineers. Not only for MEP Firms in Chicago but also Construction Engineering and Sprinkler Engineering in or near Elmwood Park Chicago. Call us at (312) 767-6877

Contact Us
How To Become A Fire Protection Engineer

Property owners throughout Cortland, NY have come to rely on NY Engineers for a wide range of engineering services ranging from Fire Protection Engineering to Engineering Reports. This is why construction companies in Elmwood Park Chicago will tell you that if you are seeking a excellent MEP Engineering firm in Elmwood Park Chicago, Illinois you should consider NY Engineers.

It is very possible, you may have walked into any particular type of building and observed the outcome of MEP Engineering. To put it simply, MEP concentrates in the mechanical, electrical and plumbing aspects of engineering. In essence, MEP already gives rise to the most typical and spot-on assumption of exactly what is MEP. This article will go into some specifics of what is MEP Engineering.

So far as the mechanical part is involved, for both commercial and residential engineering, this works with anything that moves. Furthermore its involves the usage of complex and straightforward machines and also other mechanical mechanisms to carry out certain tasks. Some normal mechanical engineering tasks which is often noticed everyday are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems which take care of enhancing the energy productivity.

The electrical part of construction is centered on the electrical safety, functions, components, and above all, the wiring of any building. Engineers within this department go to great lengths to ensure that the layout of any building are designed to provide ample power to every component in a safe manner where each of the electrical codes are followed. Some familiar electrical engineering jobs can be found in the lighting design, modifying the voltage and allocating the electricity to every single component in the building that demands a supply.

As far as plumbing, there may be a wide array of plumbing factors which make up the final style of any structure. Plumbing engineering goes deeper than just toilets, faucets, and sinks, and houses several behind the scene appliances. These being the sewage and drainage lines and also the buildings household water supply and exactly how it flows.

As we conclude this article we have now just checked out what is MEP Engineering. MEP Engineering is administered throughout the construction industry. And, supports completing the simply ignored technical areas of any building.

Hiring an MEP Engineering Firm in Elmwood Park Chicago is Necessary for Major Construction Projects

Using an MEP engineering firm in O’Hare Chicago, Illinois, can have everything to do with the achievements of your construction project. These pros might help offset the expense of making such a hiring decision when it comes to energy saving alone. When you find yourself talking about large commercial buildings, energy management is really a topic of discussion. It’s time to discover some other great reasons for employing MEP engineering company in Goose Island Chicago, IL.

Engineers have a great deal to do with the physical integrity of your building. If you can well envision, it means the hidden is extreamly important. Design not simply deals in looks but the basis of a building including its mechanism. That is just another solid good reason that hiring an MEP engineering company will probably be helpful to any project.

Think about all of the pipes and plumbing. Consider the heating and cooling systems and the importance of getting all its components in the correct places. Energy maintenance was mentioned, but energy competence is another significant term to note. Energy efficiency is related to your HVAC system, and it plays an important part in energy saving in general.

Think of your building’s foundation. Consider setting up security systems and the safety and security measures put in place through the structure. With everything else mentioned so far, it’s reliable advice that many elements of building construction could be either ignored or underestimated without MEP experts on-the-job.

Now with this info you will look to find the best MEP engineering company in the market, right? It’s pretty obvious that this best engineers really need to be in the large scale building of commercial structures. Customised is the proper term to utilize to illustrate the way these specilists will modify a construction project to meet the needs of your own operations. Even with all of this information you would like more info about the MEP Engineering services in Elmwood Park Chicago, IL by NY Engineers you should visit at our Elmwood Park Chicago Sprinkler Engineering blog.

Fire Protection Engineering Related Blog

US Department of Energy: Electrical Engineering Efficiency Standards for Appliances and Equipment

Value Engineering Pdf

Energy and electrical engineering in all its forms are complex technical topics, and for the general public it can be hard to tell which products are energy efficient. The US Department of Energy (DOE) has been creating and enforcing standards since 1979 to ensure that appliances and equipment provide value for customers. This has been one of the most effective energy efficiency policies ever implemented by the US, yielding billions of dollars in energy savings each year.

As of 2017, the US Department of Energy publishes standards for more than 60 product categories, which account for more than 90% of residential energy consumption, 60% of commercial energy consumption, and 30% of industrial energy consumption. In addition, the DOE updates its procedures every seven years to keep up with the pace of technological development. These testing procedures are also used by the ENERGY STAR program, which showcases the most efficient products in the market, and is a joint effort by the US Department of Energy and Environmental Protection Agency (EPA). The main differences between both programs are the following:

  • The Appliance and Equipment Standards Program is mandatory and enforced by federal laws. If a product is part of a regulated category and is found to be non-compliant, it cannot be sold legally in the US.
  • The ENERGY STAR program is more demanding in its performance requirements, but voluntary. However, labeling is required by some rebate programs for energy-efficient equipment. The program has a category called ENERGY STAR Most Efficient, which lists the top-performing equipment year by year.

Achievements of the DOE Standards Program

Thanks to the DOE Appliances and Equipment Standards Program, energy consumers are expected to achieve cumulative savings of $1 trillion by 2020, and $2 trillion by 2030. In 2015 alone, US homes and businesses saved approximately $63 billion in energy expenses thanks to the program.

In the absence of DOE standards, the average US household would spend $321 more on energy each year. In addition, since testing procedures and standards are under constant improvement, annual household savings are expected to increase to $529 by 2030. The following are some of the home appliances that have achieved the largest efficiency improvements since the US DOE started regulating them:

  • Compared with 1973 models, modern refrigerators only consume 25% of the energy while offering 20% more storage space and having a retail price that is 50% lower.
  • Since 1990, energy use has been reduced by 70% for clothes washers, 40% for dishwashers, 50% for air conditioners and 10% for furnaces.

To keep up with the pace of technological development, the US DOE reviews its approved testing procedures every seven years, and standards are reviewed every six years. This helps manufacturers schedule their product launches more effectively, since the publication of reviewed standards and testing procedures follows a predictable timeframe.

How the DOE Chooses Which Products to Regulate

When deciding which appliances and equipment to cover in its standards, the DOE considers the average energy consumption of the product in question and its total energy use throughout the US. They also analyze the technological and economic implications of energy efficiency improvements, and only proceed with those that are considered feasible.

There are many occasions where a specific product category is found to have significant potential for energy efficiency improvement, but a labeling program may be enough to achieve the required performance level. In these cases, the DOE may decide that a full standard is not necessary and that a labeling program is enough.

How Manufacturers and Electrical Engineering Experts Can Manage their Certification Process

Although DOE standardization may seem like a burden for manufacturers and others involved in electrical engineering, it is actually beneficial because they can deal with a single regulating entity, rather than having to meet fragmented standards from many institutions. In fact, no agency is allowed to regulate products already covered by DOE standards, unless a waiver is granted by the DOE itself.

The US DOE developed an online tool called the Compliance Certification Management System (CCMS). Through this platform, manufacturers and authorized third-parties can create, submit and track reports completely through the Internet. The system has a Microsoft Excel template for each product category to speed up the certification process, and submissions are automatically directed to the corresponding area of the DOE’s Building Technologies Office for review.

Once a submission has been approved, it is published through another online tool called the Compliance Certification Database, where certification reports and compliance statements can be browsed and filtered by product category. The US DOE updates the database every two weeks, adding any new products that were reviewed and certified after the last update. This database ensures that all key certification information is readily available for manufacturers, as well as their business partners and clients.

The eeCompass Platform For Customers

Even with certified products, a customer may not get the best performance if the equipment selected is not a suitable match for the intended application. Therefore, the DOE has created the eeCompass website to help customers make informed decisions regarding their energy-consuming appliances.

The eeCompass platform covers more than 2 million products and allows users to search and compare them by model number, manufacturer or key performance metrics.

The US Department of Energy holds meetings where the general public is invited to comment on proposed changes to testing procedures and standards. Meeting dates are published in the Building Technologies Office website, and participation can be in-person or online.

By making sure their electrical engineering professionals and other contractors only use compliant equipment, property management companies can guarantee energy efficiency in their building systems, while also making indoor spaces safer for occupants.

Popular searches related to Energy Modeling in Elmwood Park Chicago, IL.

What Do Architectural Engineers Do

(MEP) Engineering Service in Elmwood Park Chicago

MEP Company Elmwood Park Chicago! If you re searching for a reliable MEP Engineering in Chicago? The one to go to is is NY Engineers. Not only for MEP Firms in Chicago but also Electrical Engineering and Sprinkler Engineering in Elmwood Park Chicago. Contact us at (+1) 312 767-6877 The great majority of builders throughout Newburgh, NY have come to depend on New York Engineers for a wide range of engineering [...]

2018-09-19T08:30:52+00:00