MEP Service in Garfield Ridge Chicago, IL.

Contact Us

Looking for the top MEP Firms in Chicago? Your best bet is to reach out to is NY Engineers. Not only for MEP Firms in Chicago but also Value Engineering and Sprinkler Design Engineering near Garfield Ridge Chicago. Call (+1) (312) 767-6877

Contact Us
Construction Engineers Near Me

Developers throughout Elmont, New York have come to depend on NY Engineers for a wide range of engineering services ranging from MEP Engineering to Energy Modeling. For this reason property owners in Garfield Ridge Chicago will tell you that if you are seeking a dependable MEP Engineering firm in Garfield Ridge Chicago, IL you should consider New York Engineers.

Chances are, you might have walked into any specific sort of building and observed the outcome of MEP Engineering. Basically, MEP centers around the mechanical, electrical and plumbing aspects of engineering. In simple terms, the name already gives rise to the most typical and precise theory of exactly what is MEP. Our article may go into some infor of what is MEP Engineering.

So far as the mechanical aspect is involved, for residential and commercial engineering, this relates to anything that moves. Furthermore its entails the usage of complex and straightforward machines as well as other mechanical mechanisms to do certain tasks. Some ordinary mechanical engineering tasks that may be noticed everyday are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems that handle improving the energy productivity.

The electrical element of construction is focused on the components, functions, electrical safety, and more importantly, the wiring for any building. Engineers within this department go to great lengths to ensure the schematics of a building are meant to provide adequate electricity to every component in a safe manner where each of the electrical codes are met. Some commonplace electrical engineering tasks can be found in the lighting design, modifying the voltage and distributing the energy to every component within the building which requires a supply.

plumbing, there may be a variety of plumbing factors which make up the final style of any building. Plumbing engineering goes deeper than simply faucets, toilets, and sinks, and accommodates several behind the scene appliances. These being the drainage line and sewage as well as the buildings local water supply and the way it flows.

As we conclude this article we certainly have just looked at what is MEP Engineering. MEP Engineering is administered within the construction industry. And, assists in completing the easily overlooked technical aspects of any building.

Hiring an MEP Engineering Firm in Garfield Ridge Chicago is Necessary for Major Construction Projects

Using an MEP engineering company in Golden Gate Chicago, Illinois, may have a whole lot to do with the achievements of your construction project. These experts may help offset the price of making this type of hiring decision with regards to energy management alone. If you are discussing huge commercial buildings, energy saving is a vital topic of discussion. It’s time to determine some other great reasons for employing MEP firm in Heart of Chicago, IL.

Engineers have everything to do with the physical reliability of the building. As you can well envision, it means the hidden is extreamly important. Design not only deals in looks but the underpinning of a building also its workings. That is certainly merely another solid good reason that using an MEP engineering firm will be beneficial to any project.

Think of all of the pipes and plumbing. Look at the cooling and heating systems and the importance of getting all of its components inside the right places. Energy saving was mentioned, and energy efficiency is another important term to bring up. Energy competence has everything to do with your HVAC system, plus it plays a huge part in energy saving as a whole.

Consider your building’s foundation. Consider the installation of fire alarm systems and the security and safety measures set up through the structure. With everything else talked about to date, it’s reliable advice that many aspects of building construction may be either overlooked or underestimated without MEP professionals on-the-job.

Now with all you have read you are going to look for the best MEP engineering firm available, right? It is very obvious the best engineers really need to be active in the large building of commercial buildings. Customized may be the proper term to work with to clarify just how these pros will customize a construction job to meet the requirements of your respective operations. There is a great possibility you would like more information about the MEP Engineering services in Garfield Ridge Chicago, IL by New York Engineers you should stop by at our Garfield Ridge Chicago Construction Administration blog.

Plumbing Engineering Related Post

A Plumbing Engineering Expert Explains Storage and Demand-Type Water Heaters

MEP Engineering Firms

Water heaters are household appliances that normally use natural gas or electricity to produce heat, and often include a tank to store hot water. These plumbing engineering systems provide a very important service for modern society, especially in locations with cold winters. Water heaters represent a significant portion of building energy expenses, so an optimal design is very important to achieve low-cost operation.

The following summarizes the main types of water heaters:

Traditional tank-type water heaters work with either gas or electricity. They offer a large volume of hot water that can be dispersed throughout your entire home, and typically keep the stored water at a temperature near 120°F at all times. Oil-fired models are also available but have a higher running cost than gas heaters and pollute more than other plumbing engineering solutions for water heaters.

Heat pumps also use a storage tank but differ from conventional electric heaters in the method used to raise water temperature. While conventional heaters apply voltage to an electric resistance, heat pumps are like a refrigerator operating in reverse: they cool the surrounding air to heat the water inside.

Tankless or demand-type water heaters do not store hot water, but rather heat it quickly on demand. These are also available in both gas-fired and electric versions.

How to Select a Water Heater

The selection process for a water heater depends on the specific subtype. For example, tankless heaters must be sized to provide rapid heating in short bursts, while storage heaters can provide a steadier and less intense heat output. Regardless of the type of heater chosen, consider that saving water also saves energy, since there are less gallons to heat per day.

1)   Tankless or Demand-Type Water Heater

The first step is to identify the required flowrate in gallons per minute (GPM). To provide an example, consider the following figures from 2010 plumbing standards:

  • Bath lavatory sink = 0.5 GPM
  • Standard shower = 2 to 2.5 GPM
  • Total demand = 3 GPM.

The next step is to determine the temperature rise needed, from the difference between the required water temperature and the incoming water temperature. In this example, if the required temperature is 110°F and the incoming temperature is 57°F, the temperature rise is:

  • Temperature rise = 110°F – 57°F = 53°F

In this application, it would be necessary to select a water heater that runs at 3 GPM with a 53°F heat rise. This is very different from conserving water at 110°F inside a tank, since the demand-type heater must achieve the full temperature rise the moment water flows through.

2) Storage-Type Water Heater

The design approach here is different, since this type of heater keeps a reservoir for when hot water is needed. Hot water demand is typically analyzed in gallons per hour (GPH) instead of gallons per minute (GPM). Normally, GPH values come from local plumbing codes, while demand factors and storage factors for commercial and residential occupancies are mentioned in ASHRAE Codes.

Consider the following example:

  • Hot water demand = 492 GPH
  • Demand factor = 0.3 (for private residences per ASHRAE)
  • Storage factor = 0.7 (for private residences per ASHRAE)
  • Temperature rise (ΔT) = 100°F

The first step is to determine the required recovery rate, which describes how many gallons of water must be handled by the heater per hour. This value is obtained by multiplying the total hot water demand and the demand factor:

  • Recovery rate = 492 GPH x 0.3 = 147.6 GPH

The actual heat input is calculated as follows:

  • Heat input (BTU/H) = Recovery Rate (GPH) x ΔT (°F) x Specific Heat (BTU/gal °F)
  • Heat input (BTU/H) = 147.6 GPH x 100°F x 8.33 BTU/gal °F = 122,950.8 BTU/H
  • Heat input (BTU/H) = 123 MBTU/H (thousand BTU per hour)

The required capacity of the tank is determined by the storage factor:

  • Tank capacity = Recovery Rate x Storage Factor
  • Tank capacity (gal) = 147.6 GPH x 0.7 = 103 gal

In this application, the water heater must have a capacity of 123 MBTU/H at 100°F temperature rise and a recovery rate of 147.6 GPH.

Advantages and Disadvantages of Each Heater Type in Plumbing Engineering

Like with any engineering decision, water heaters come with distinct advantages and disadvantages. This section summarizes the strong points of each technology, as well as the limitations.

Storage-type Water Heater

Advantages:

  • Lower initial cost – A traditional water heater can cost half as much as a tankless water heater.
  • Easy and inexpensive to replace – A simpler installation means there’s less that can go wrong. Maintenance and reparations have a lower cost.

Disadvantages:

  • Higher utility bill – Water is heated and reheated at a preset temperature regardless of your hot water needs. This increases your utility bill, especially during the winter.
  • Space requirements – They occupy more room and can’t be placed outside.
  • Can run out of hot water – Ever been the last in your family to get the shower? It’s a chilling experience. This problem can be avoided by purchasing a larger tank, but this also leads to more energy costs because a larger volume of water must be kept hot.
  • Shorter service life – This type of heater lasts 10-15 years. As a result you have to buy them twice as often as tankless water heaters.

Tankless Water Heater

Advantages:

  • Saves money in the long run – For homes that use below 41 gallons of hot water per day, demand-type water heaters can be 24–34% more energy efficient than conventional storage heaters.
  • Compact and versatile – They are small and can be installed in more places compared with storage heaters, even outside a wall.
  • Longer service life – Last 20 years or more, almost doubling a traditional water heater’s service life.
  • Deliver hot water on demand – Tankless heaters provide two to three gallons of hot water per minute on demand. This can up to 5 GPM with gas-fired heaters.

Disadvantages:

  • Higher initial cost – Cost between $2800 to $4500 installed, depending on the model and supplier.
  • Retrofitting adds to upfront cost – Replacing a traditional water heater with a tankless system is more complicated, since the capacity of the electric or gas service entrance must be increased in most cases.

Which Are The Best Applications for Each Type of Heater?

Storage-type water heaters tend to work best when demand for hot water is constant and fluctuating, where low-demand periods can be used to replenish the tank. Some examples of suitable applications are restaurants, commercial areas, residential apartments and hotels.

Tankless water heaters are better suited for applications where the demand of hot water is well-known and occurs occasionally in short bursts. Some suitable applications are remote bathrooms and hot tubs. These heaters are also useful as boosters for dishwashers, clothes washers and other similar appliances. They can also complement solar water heaters that are unable to meet hot water demand by themselves.

If you are considering a new domestic hot water system, the best recommendation is to get professional assistance. A plumbing engineering professional will help ensure the DHW system will be adequate for the needs of your building.

Popular searches related to Electrical Engineering in Garfield Ridge Chicago, IL.

Engineering Firms Near Me_

(MEP) Engineering Service in Garfield Ridge Chicago

MEP Engineers Garfield Ridge Chicago! If you're looking for a competent MEP Engineering in Chicago? Your best bet is to reach out to is NY Engineers. Not only for MEP Engineering in Chicago but also Mechanical Engineering and Protection Engineering near Garfield Ridge Chicago. Contact us at (+1) 312 767.6877 A large group of developers throughout Peekskill, New York have come to depend on New York Engineers for a wide range [...]

2018-09-13T04:24:04+00:00