MEP Engineering Services in Gladstone Park Chicago, Illinois.

Electrical Engineers

Construction companies throughout Lake Ronkonkoma, New York have come to depend on New York Engineers for a wide range of engineering services ranging from Plumbing Engineering to CAD to Revit Modeling. For this reason building owners in Gladstone Park Chicago will tell you that if you’re looking for a top-rated MEP Engineering firm in Gladstone Park Chicago, IL you should consider NY Engineers.

It is very possible, you may have walked through any specific sort of building and seen the results of MEP Engineering. Basically, MEP concentrates on the mechanical, electrical and plumbing elements of engineering. In essence, the name already gives a clue to the most typical and spot on guess of precisely what is MEP. This article goes into some infor of what is MEP Engineering.

As far as the mechanical side is concerned, for both commercial and residential engineering, this deals with anything that moves. Moreover its entails the usage of complex and easy machines together with other mechanical mechanisms to execute certain tasks. Some everyday mechanical engineering tasks which can be noticed daily are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems which take care of improving the energy productivity.

The electrical part of construction is focused on the components, functions, electrical safety, and most importantly, the wiring for any building. Engineers within this department go to great lengths to make sure that the layout of any building are meant to deliver ample electricity to each individual component in a safe manner ensuring that each of the electrical codes are met. Some commonplace electrical engineering tasks can be obtained from the lighting design, modifying the voltage and allocating the energy to every component within the building that takes a supply.

So far as plumbing, there is certainly a variety of plumbing components which make up the final design of any building. Plumbing engineering goes deeper than just toilets, faucets, and sinks, and accommodates many behind the scene devices. These being the sewage and drainage lines along with the buildings household water supply and exactly how it flows.

As we conclude this article we certainly have just considered what is MEP Engineering. MEP Engineering is administered within the construction industry. And, aids in completing the simply unnoticed technical facets of any building.

Hiring an MEP Engineering Firm in Gladstone Park Chicago is Essential for Major Construction Projects

Hiring an MEP engineering company in Andersonville Chicago, ILO, can have everything to do with the safety of your construction project. These experts can help offset the price of making this sort of hiring decision when it comes to energy conservation alone. While you are speaking about huge commercial buildings, energy saving is a vital topic of discussion. It’s time to learn various other great reasons for using MEP engineers in Dearborn Homes Chicago, ILO.

Engineers have a lot to do with the physical integrity of your building. If you can well imagine, this means the unseen is very vital. Design not just deals in looks but the base of a building and its workings. Which is merely another solid reason why using an MEP engineering company will probably be useful to your project.

Consider each of the pipes and plumbing. Think about the heating and cooling systems and the importance of getting each one of its mechanics in the precise places. Energy maintenance was mentioned, and energy competence can be another vital term to discuss. Energy competence is about your HVAC system, plus it plays an important part in energy maintenance as a whole.

Think of your building’s shell. Consider installing fire alarm systems and the safety and security measures put in place through the structure. With everything discussed up to now, it’s safe to say that many facets of building construction may be either disregarded or minimized without MEP engineers on the job.

Now with all you have read you will look for the very best MEP engineering company in the business, right? It’s pretty clear that the best engineers must be in the massive building of commercial buildings. Tailor made is the proper term to work with to clarify the way these specilists will customize a construction job to meet the requirements of your respective operations. Even with all of this information you would like more details about the MEP Engineering services in Gladstone Park Chicago, Illinois by NY-Engineers.Com you should take a look at our blog.

Utility Filings Related Post

Architectural Engineers Detail Ventilation System Configurations

Electrical Engineering Schools

Human activity generates a broad range of compounds that become dangerous in high-enough concentrations, and pollutants from outdoor sources can also degrade indoor air quality. Architectural engineers are often charged with the job of preventing this from occurring as much as possible.

Ventilation systems keep these substances at low levels by constantly renewing indoor air, and they also contribute to keeping moisture within the range of 30 to 60 percent as recommended by ASHRAE. Without ventilation, it would not be possible to keep indoor environments comfortable and healthy.

Natural ventilation relies on wind currents, outdoor temperature and other weather conditions to supply fresh air. The advantage of natural ventilation is that it comes for free, and in new buildings it is possible to optimize architectural design to maximize its effects. However, natural ventilation is uncontrollable, and generally insufficient to fully meet the requirements of modern buildings.

Normally, to meet ASHRAE standards and local building codes, mechanical ventilation must be deployed. Depending on their configuration, whole-house ventilation systems can be classified into three main types:

  • Exhaust ventilation systems, which only use extractor fans.
  • Supply ventilation systems, which only use injector fans.
  • Balanced ventilation systems, which use both injector and extractor fans.

Balanced systems can be enhanced with energy-recovery ventilation, a technology that exchanges energy between the supply and exhaust airflows to maximize performance and minimize the overall running cost of the system.

Exhaust Ventilation Systems

As implied by their name, exhaust ventilation systems only deploy extractor fans. When the system starts to run, it creates a negative pressurization effect in occupied spaces, drawing in fresh outdoor air to renew that which is exhausted. It is important to note, however, that exhaust ventilation is not possible in air-tight buildings, since outdoor air must be allowed to leak in. If the building envelope has been tightened with caulking and weather stripping, exhaust ventilation must be complemented with intake vents.

Exhaust ventilation systems have a single set of fans and ducts, which makes them affordable while reducing their installation time and cost. Energy expenses are relatively low because there is only one set of fans in operation, and maintenance is simplified as well. The system layout can be designed to target specific areas where pollutants are generated, ensuring they are removed before they spread indoors.

Exhaust ventilation generally achieves the best results in cold and dry climates, where outdoor air does not require dehumidification. It is not recommended for tropical and mixed climates, because warm and humid outdoor air is drawn in without control, driving up cooling and dehumidification expenses. Also, keep in mind that depressurization draws air from all surrounding spaces, with little control over pollutant content. In general, architectural engineers recommend exhaust ventilation for cold weather, and when outdoor air pollution is low.

Another risk of exhaust ventilation is backdraft, which occurs when a combustion-based appliance suddenly draws in a lot of air, potentially causing a flashover. Since exhaust ventilation causes negative pressurization and does not control air supply, there is an increased chance of backdraft.

Supply Ventilation Systems

Supply ventilation only uses injector fans, pressurizing rooms and causing indoor air to leak out constantly. The main advantage of supply ventilation is control, since outdoor air can be filtered, humidified or dried as needed. In addition, the pressurization effect prevents the inflow of pollutants from surrounding spaces or from outdoors.

Another benefit of supply ventilation is that it eliminates the risk of backdraft from combustion appliances due to positive pressurization. Installation, operation and maintenance expenses are also reduced thanks to the simple system configuration.

Supply ventilation is better suited for tropical or mixed climate conditions, where dehumidification and filtering are often required. This configuration tends to cause trouble in cold weather, since the pressurization effect can cause condensation of indoor air humidity, leading to moisture accumulation and its common side-effects: furniture damage and the proliferation of mold, bacteria and dust mites.

Balanced Ventilation Systems

A balanced ventilation system is the result of combining exhaust and supply ventilation: both airflows can be controlled, providing the benefits of both system configurations. Of course, this comes at a higher installation and operation cost, since there are now two sets of fans and ducts.

Balanced ventilation is suitable for all weather conditions, and airflows can be adjusted to provide any pressurization effect as required – positive, negative or neutral. The recommended locations for each set of ducts are the following:

  • Supply ducts should focus on areas where occupants spend most of their time, including living rooms and bedrooms. This ensures that these areas always have a supply of fresh and clean air.
  • Exhaust ducts should focus on areas where moisture and humidity are released frequently, such as kitchens, bathrooms, laundries and boiler rooms.

Of course, it is possible to install supply and exhaust rooms for every room, but system costs are increased significantly. With the approach presented above, system costs are optimized without compromising performance.

Energy-Recovery Ventilation: Architectural Engineers Improve the
Efficiency of Balanced Ventilation

Energy-recovery ventilation consists on exchanging energy between the supply and exhaust air, so that overall HVAC costs are minimized. These systems can be classified into two main types:

  • Heat-Recovery Ventilation (HRV)systems only exchange heat between the supply and exhaust airflows.
  • Enthalpy-Recovery Ventilation (ERV)systems exchange both heat and moisture.

Summer Operation

In the summer, outdoor air typically requires cooling and dehumidification. However, when air is exhausted, it is still cooler and drier than the supply air; therefore, a part of the energy used for cooling and dehumidification is lost.

  • The use of a heat exchanger (HRV) can improve energy efficiency: the exhaust air is used to precool the supply air without mixing both airstreams.
  • If an ERV system is used, moisture is also transferred from the supply air to the exhaust air, further improving air-conditioning efficiency because there is less moisture to remove.

Winter Operation

During the winter, HVAC needs are reversed because outdoor air typically requires heating and humidification. The operating principle of HRV and ERV is the same, but the direction in which heat and humidity are transferred is inverted.

  • The exhaust air is warmer, and the heat exchanger captures a part of that thermal energy to preheat the supply air.
  • If ERV is used, moisture is also retrieved from the exhaust air and provided to the supply air.

General Recommendations for HRV and ERV

It is important to note that HRV and ERV systems are significantly more complex than the ventilation systems presented before. They can only be installed and serviced by qualified personnel, which increases their cost of ownership. Compared with a basic balanced ventilation system, HRV and ERV systems have a higher running cost, but overall HVAC expenses are reduced.

HRV and ERV systems increase in effectiveness where temperature  and moisture extremes are reached during the summer or winter, or when heating fuel costs are high. Their benefits are diminished under moderate weather conditions, where the added running cost may be higher than the savings achieved – balanced ventilation is a better alternative in these cases.

Spot Ventilation: A Complement for Whole-House Ventilation

Spot ventilation consists on using exhaust fans to extract pollutants and humidity at the room where they are released, preventing them from being spread throughout other indoor spaces. In residential settings, spot ventilation is most commonly used in bathrooms and kitchens to meet the minimum exhaust air levels established in both the area mechanical codes and ASHRAE standards:

  • Bathrooms require 50 cfm of intermittent ventilation or 20 cfm of continuous ventilation.
  • Kitchens require 100 cfm or intermittent ventilation or 25 cfm of continuous ventilation.

Spot ventilation can be a great complement for supply ventilation systems, removing pollutants from key areas. This combination provides many of the benefits of a balanced ventilation system without having to install a full set of exhaust fans and ducts. According to experienced architectural engineers, the only disadvantage of this combination is that HRV and ERV systems are unfeasible, since there is no point where heat or moisture can be exchanged between airflows.

searches related to Construction Administration in Gladstone Park Chicago, Illinois.

Value Engineering Techniques

(MEP) Engineering Service in Gladstone Park Chicago

How Can Our Gladstone Park Chicago MEP Engineers Help You! A large group of building owners throughout Garden City, New York have come to rely on NY-Engineers.Com for a wide range of engineering services ranging from Electrical Engineering to Building Commissioning. This is why construction companies in Gladstone Park Chicago will tell you that if you're searching for a top-rated MEP Engineering firm in Gladstone Park Chicago, IL you should consider NY [...]

2018-09-09T15:29:47+00:00