MEP Service in Hoffman Estates, Illinois.

Contact Us

In search of MEP Chicago? Your best bet is to call is NY Engineers. Not only for MEP Firms in Chicago but also Electrical Engineering and Protection Engineering in Hoffman Estates. Call (+1) 312 767-6877

Contact Us
Construction Engineering Degree

Property owners throughout West Babylon, New York have come to rely on NY-Engineers.Com for a wide range of engineering services ranging from Electrical Engineering to Energy Modeling. For this reason developers in Hoffman Estates will tell you that if you’re looking for a dependable MEP Engineering firm in Hoffman Estates, IL you need to consider New York Engineers.

Chances are, you might have walked through any specific form of building and observed the results of MEP Engineering. Simply put, MEP concentrates on the mechanical, electrical and plumbing facets of engineering. Essentially, MEP already gives rise to the most typical and accurate assumption of precisely what is MEP. Our article will go into some information on what is MEP Engineering.

So far as the mechanical side is concerned, for both residential and commercial engineering, this deals with anything which moves. Moreover its entails the application of complex and uncomplicated machines and also other mechanical mechanisms to carry out certain tasks. Some common mechanical engineering tasks that can be noticed on a day to day bacis are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems that take care of boosting the energy efficiency.

The electrical part of construction is centered on the electrical safety, functions, components, and even more importantly, the wiring for any building. Engineers with this department go to great lengths to ensure that the schematics of your building are created to supply enough electricity to every individual component in a safe manner where each of the electrical codes are met. Some commonplace electrical engineering jobs are available in the lighting design, regulating the voltage and distributing the energy to every single component within the structure which demands a supply.

With regards to plumbing, there is certainly a variety of plumbing factors that make up the final style of any building. Plumbing engineering goes deeper than only toilets, faucets, and sinks, and contains many behind the scene appliances. These being the sewage and drainage lines as well as the buildings household water supply and how it flows.

As we conclude this article we have now just checked out what is MEP Engineering. MEP Engineering is administered throughout the construction industry. And, assists in completing the simply ignored technical areas of any building.

Hiring an MEP Engineering Firm in Hoffman Estates is Necessary for Large Construction Projects

Hiring an MEP engineering firm in West Lakeview Chicago, Illinois, may have a whole lot to do with the prosperity of your construction project. These engineers may help offset the fee for making this sort of hiring decision when it comes to energy conservation alone. While you are discussing large commercial buildings, energy management is an important topic of discussion. It’s time to discover various other great reasons for hiring MEP firm in River North Chicago, IL.

Engineers have a lot to do with the physical reliability of your building. If you can well envision, it means the unseen is extreamly important. Design not merely deals in aesthetics but the underpinning of a building and its mechanism. That may be yet another solid logic why employing an MEP engineering firm will likely be good for any project.

Think about each of the pipes and plumbing. Think about the cooling and heating systems and the importance of getting all of its mechanics inside the precise places. Energy conservation was stated, but energy efficiency is another significant term to note. Energy efficiency concerns your HVAC system, and it plays an important part in energy maintenance in general.

Think about your building’s footing. Consider installing security systems and also the security and safety measures put in place along the entire structure. With everything discussed so far, it’s safe to say that numerous elements of building construction might be either overlooked or underestimated short of MEP pros at work.

Now with this info you will be looking for the very best MEP engineering firm in the market, right? It’s very obvious the best engineers really need to be active in the massive construction of commercial buildings. Tailor made may be the best term to make use of to explain how these engineers will modify a construction project to meet the needs of your operations. There is a great possibility you would like more info on the MEP Engineering services in Hoffman Estates, IL by NY Engineers we invite you to check out at our blog.

New Mechanical Engineering Related Blog

How Mechanical Engineers Compare Operating Expenses of Different Water Heater Models

MEP Engineering Firms Near Me

One of the key characteristics to consider when deciding between several water heater options is the operating cost; the heater with the lowest price tag is not necessarily the least expensive to own in the long term. Operating cost is determined in great part by equipment efficiency, but there are other equally important factors that mechanical engineers want you to consider:

  • Energy sources have different unit prices. In the case of heating systems, the input is generally electricity, natural gas, propane or fuel oil. There are also zero-cost energy sources, such as geothermal energy and sunlight.
  • Operating schedules may vary depending on the type of heater. Rated power is not the only factor that determines total energy consumption; the operating schedule must also be considered. For example, tankless water heaters have a high rated power but operate in short bursts, saving energy compared to a storage heater that draws less power but operates continuously, assuming the energy source is the same.

This article will provide a guide for calculating and comparing operating expenses with different types of heaters. After these values are calculated, they can be weighed against the upfront cost of each heating system to find the most cost-effective option.

As with any investment in equipment, considering the total ownership cost is very important when purchasing a heater: to calculate the real heating cost per BTU or kWh produced, it is necessary to factor in the initial investment and any maintenance or reparation expenses. For instance, saying that solar heating is free would not be completely true; although the energy input is free, there are equipment and installation costs, and in multistory buildings a small pump may be required for water to reach the rooftop.

Energy Factor: How Mechanical Engineers Calculate Heating Expenses

The energy factor (EF) is the ratio of heating output to energy input offered by a heating system. It considers how effectively the heater converts its energy input into an increase in water temperature, but also accounts for other aspects of heater operation:

  • Standby losses – These losses are found in storage heaters, and they represent the heat loss associated with keeping the water in the tank at the desired temperature. Although proper insulation mitigates standby losses, they are impossible to eliminate completely.
  • Cycling losses – These losses occur as water circulates through the heater’s internal piping, and through the storage tank if present.

Heaters running on fossil fuels have energy factors well below unity, electric tankless heaters operate close an EF of 1, and heat pumps have EF values higher than unity because their inverse refrigeration cycle allows them to draw heat from the surrounding environment.

Comparing Water Heaters: An Example

Assume you are presented with four water heaters for a household that consumes 80 million BTU per year, and want to calculate the operating costs associated with each alternative:

  • A gas-fired storage heater with an EF of 0.55
  • A tankless electric heater with an EF of 0.97
  • A tankless gas heater with an EF of 0.80
  • An electric air-source heat pump with an EF of 2.5

Since the example is for one city, assume the cost of natural gas is $1.20 per 100,000 BTU, and the electricity rate is $0.18 per kilowatt-hour.

  • For the gas heaters, the calculation procedure can be carried out directly because the heating output and energy input are both in BTU.
  • The tankless electric heater and heat pump run with electricity, so the heating output must be converted to kWh before proceeding.
  • Heating Output (kWh)=80,000,000 BTU x 1kWh/3412.14 BTU= 23,446 kWh

Other than this, the calculation procedure is the same for all four heaters. The yearly heating output is divided by the energy factor (EF) to calculate yearly energy consumption, and this value is then multiplied by the unit price of energy, per kWh or BTU. This formula is applied by mechanical engineers to all four water heaters, to determine which is the least expensive to operate.

Gas-fired storage heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.55×1.20 USD/100,000 BTU=1745 USD

Tankless electric heater operating cost:
Operating Cost (USD/yr)=23,446 kWh/.97X.18 USD/kWh=4351 USD

Tankless gas heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.8 X 1.20 USD/100,000 BTU=1200 USD

Electric air-source heat pump operating cost:
Operating Cost (USD/yr)=23,446 kWh/2.5 X .18 USD/kWh=1688 USD

Operating Cost Comparison

In this case, the tankless gas heater has the lowest operating cost. The heat pump and gas-fired storage heater follow, although the heat pump wins by a slight margin. The tankless electric heater is the most expensive to operate by far.

Total Cost of Owning and Operating Heaters

For a full evaluation, the upfront cost and service life must be considered as well. For this example, assume the following cost and rated life values:

HeaterInstalled CostService life
Heat Pump$180015
Tankless electric heater$150020
Tankless gas heater$200020
Gas-fired storage heater$120010

For simplicity, the analysis will be limited to upfront and operation costs. The yearly ownership cost of each heater option would be:

  • Heat Pump Cost = $1688/year + ($1800/15 years) = $1808/year
  • Tankless Electric Heater = $4351/year + ($1500/20 years) = $4426/year
  • Tankless Gas Heater = $1200/year + ($2000/20 years) = $1300/year
  • Gas-Fired Storage Heater = $1745/year + ($1200/10 years) = $1865/year

The tankless gas heater is still the winner in this case, despite its higher upfront cost. The heat pump and gas-fired storage heater have a similar cost of ownership, and the tankless electric heater is very expensive to operate due to the high electricity rates of some cities. However, keep in mind this is just an example, and different results may be obtained for different locations.

Concluding Remarks

To determine which type of heater is the best match for your property, getting a professional assessment from one or more mechanical engineers is highly recommended. For example, if you don’t have a chimney, the installation cost of any gas heater will increase significantly. Remember that electricity and gas prices also vary by location, and what is true in one location may not always apply in another city or state.

Popular searches related to CAD to Revit Modeling Hoffman Estates, IL.

Value Engineering Ppt

(MEP) Engineering Service in Hoffman Estates

MEP Company Hoffman Estates! When you're searching for a reliable MEP Engineering in Chicago? The one to go to is is NY Engineers. Not only for MEP Firms in Chicago but also Mechanical Engineering and Sprinkler System Engineering near Hoffman Estates. Contact us at 312 767.6877 A great number of construction companies throughout Central Islip, NY have come to depend on NY-Engineers.Com for a wide range of engineering services ranging from [...]

2018-09-14T03:52:50+00:00