MEP Service in Irving Park Chicago, Illinois.

Contact Us

Looking for a top rated MEP Firms in Chicago? Your best bet is to reach out to is NY-Engineers.Com. Not only for MEP Firms in Chicago but also Construction Engineering and Sprinkler Engineering near Irving Park Chicago. Call us at (312) 767.6877

Contact Us
Electrical Engineering Basics

Developers throughout Lake Ronkonkoma, New York have come to depend on NY Engineers for a wide range of engineering services ranging from MEP Engineering to Energy Modeling. For this reason construction companies in Irving Park Chicago will tell you that if you’re seeking a excellent MEP Engineering firm in Irving Park Chicago, IL you should consider New York Engineers.

Chances are, you have walked through any specific kind of building and observed the results of MEP Engineering. In other words, MEP centers in the mechanical, electrical and plumbing elements of engineering. Basically, the name already gives rise to the most common and correct theory of exactly what is MEP. This article may go into some infor of what is MEP Engineering.

As far as the mechanical side is involved, for both residential and commercial engineering, this relates to anything which moves. In addition its involves the use of complex and simple machines as well as other mechanical mechanisms to do certain tasks. Some everyday mechanical engineering tasks which may be noticed regularly are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems which take care of increasing the energy productivity.

The electrical facet of construction is focused on the functions, components, electrical safety, and most importantly, the wiring associated with a building. Engineers in this particular department go to great lengths to ensure the schematics of any building are meant to bring ample power to each individual component in a safe manner where every one of the electrical codes are met. Some familiar electrical engineering tasks can be obtained from the lighting design, modifying the voltage and distributing the electricity to each component of building that needs a supply.

In terms of plumbing, there exists a wide array of plumbing components which constitute the final form of any structure. Plumbing engineering goes deeper than simply faucets, toilets, and sinks, and contains several behind the scene appliances. These being the drainage line and sewage plus the buildings domestic water supply and the way it flows.

As we conclude this article we certainly have just checked out what is MEP Engineering. MEP Engineering is administered in the construction industry. And, helps with completing the simply unnoticed technical aspects of any building.

Hiring an MEP Engineering Firm in Irving Park Chicago is Important for Large Construction Projects

Hiring an MEP engineering firm in McKinley Park Chicago, Illinois, can have everything to do with the prosperity of your construction project. These engineers can help offset the cost of making this type of hiring decision when it comes to energy saving alone. If you are referring to large commercial structures, energy saving is really a topic of discussion. It’s time to discover some other great factors behind using MEP engineering company in Jefferson Park Chicago, Illinois.

Engineers have a lot to do with the physical reliability of your building. As you may well envision, that means the hidden is very important. Design not simply deals in looks but the foundation of a building including its components. That may be the next solid good reason that hiring an MEP engineering firm will likely be good for your project.

Consider every one of the pipes and plumbing. Consider the air conditioning systems and the importance of getting each one of its mechanics inside the right places. Energy conservation was stated, however energy competence can be another significant term to bring up. Energy efficiency concerns your HVAC system, plus it plays an important role in energy saving in general.

Think of your building’s base. Consider the installation of fire alarm systems as well as the security and safety measures set up through the entire structure. With everything else discussed so far, it’s reliable advice that many areas of building construction can be either overlooked or underestimated without MEP engineers on-the-job.

Now with this info you are going to be looking to find the best MEP engineering firm in the industry, right? It’s very clear the best engineers have to be in the large construction of commercial structures. Tailor made is definitely the right term to use to explain the way in which these specilists will covert a construction project to meet the needs of your own operations. There is a great possibility you would like additional information about the MEP Engineering services in Irving Park Chicago, Illinois by NY-Engineers.Com we invite you to visit at our blog.

Latest Engineering Reports Related Blog Post

Cut Costs: Simplify Your MEP Engineering Design

Mechanical Engineering Jobs

There are savings opportunities throughout the entire engineering process, not just the construction stage. With effective communication and adequate team management, it is possible to optimize the design process and reduce costs of your MEP engineering project without compromising quality. High-level design software also helps: it may come at a high price, but the time and cost savings are significant.

When the engineering design process becomes long and expensive, it is typically due to one of the following factors:

  • Poor communication between design teams. This is especially important in the case of mechanical, electrical and plumbing systems – all three have complex physical layouts, and there is a high chance of overlap between components of different systems when team communication is poor.
  • Excessive changes. MEP designs are carried out on existing architectural plans, which means architectural changes can become very disruptive as the MEP design process approaches completion. Completing the final version of the architectural design is highly recommended before MEP design starts; a major architectural change after MEP design has been completed can greatly extend the design process and its cost. Changes to MEP systems are also disruptive, since they have a high degree of interdependence.

This article will provide some recommendations that can help you simplify the engineering design process while reducing its cost. There is a basic rule of thumb for cost optimization: modifications are cheap or even free when requested early in the design process, and prohibitively expensive when requested in the final stages of construction.

1) Involve All Project Stakeholders Before the Design Process Starts

If the needs and requirements of all parties are clearly stated from the beginning, they can be accounted for during project design. For example, some contractors and equipment vendors may have special requirements; if this information is known before MEP engineering design starts, changes are avoided later. These changes normally add man-hours to the design process, and if omitted they may result in expensive modifications during construction.

Make sure your MEP design team reviews all equipment specifications before the design process starts, ensuring any special requirements are accounted for. Keep in mind that some building systems involve all three areas of MEP; for example, chilled water systems involve both electrical installations and hydronic piping.

2) Follow an Integral Approach for Mechanical, Electrical and Plumbing Design

As previously stated, these three systems have very complex layouts, and if design teams don’t work in coordination, you are very likely to have issues with overlapping equipment locations. Also, keep in mind that all three systems distribute fluids or air throughout the building, and the means of distribution must not interfere with each other.

  • Mechanical systems typically involve air ducts, refrigerant lines and hydronic piping. If combustion-based heating is deployed, there will also be a chimney for flue gases, along with fuel piping and tanks.
  • Electrical Systems involve conduit and wiring, and there are also bus ducts in high-power applications. Keep in mind that transformers, motors, generators, panelboards and similar equipment may require a lot of space, and clearances may be required with respect to walls and other pieces of equipment.
  • Plumbing Systems involve pumps, as well as independent piping for potable water, wastewater, etc.

The layout of ducts and piping must be specified so that the least amount of materials is used, but taking care not to overlap components from different building systems.

3) Use Three-Dimensional MEP Engineering Design Software

There are now MEP design solutions where a three-dimensional model of the building is stored in a web server that can be accessed by all design teams, and building systems are laid out and specified directly on the model. This offers several advantages over conventional two-dimensional design:

  • Equipment locations can be visualized more clearly, especially when components from all three systems must be installed in tight spaces.
  • Modern MEP design software is smart enough to detect overlap, and design engineers can be notified immediately if it occurs. For example, if the optimal location for two pieces of equipment is the same, they can decide which of the two devices can be relocated for the least cost.
  • The confusion associated with different versions of the same design is eliminated; versions no longer exist, since the entire design process is carried out on a unified 3D model.
  • Most three-dimensional MEP design software can calculate all bills of materials (BOM) automatically, further reducing the total man-hours required for the project.

MEP design software has a high upfront cost, but the investment is compensated by the sheer number of man-hours saved. Also, there are now software solutions with the option of paying a recurring monthly fee, instead of an expensive one-time license. This purchasing model tends to be more attractive for smaller companies with limited budgets.

Having a well-trained staff is just as important as implementing a powerful software solution. If you will invest in a high-level MEP design package, make sure your engineering team learns how to use it effectively. For example, software solutions often have keyboard shortcuts and commands that considerably speed up the work, and using them is much faster than clicking on functions with the mouse. The difference may not be evident for a single action, but when you consider the total man-hours saved the effect is significant.

4) Use a Project Management Platform

E-mail is not always practical when coordinating multidisciplinary teams: tasks must be assigned textually, and there is always the chance of missing or misspelling one of the e-mail addresses. There are now project management platforms where team members can be added to common dashboards, and notifications are sent automatically whenever a task is assigned, modified or completed.

Project management platforms allow team members to focus on the tasks assigned, while communication is streamlined and automated in the background. For example, marking a milestone as finished and linking a project deliverable is faster than sending an e-mail to the entire team with the file as an attachment.

5) Consider Outsourcing the Entire MEP Design Process

Having an in-house engineering team may make sense in industrial settings, or other business sectors where technical assistance is required on an ongoing basis. However, there are companies for which the cost of a permanent engineering staff can’t be justified, and in makes more sense to hire an external firm specializing in MEP design and consulting. This way, the client can save the capital and time required for workstations, software and team building, dedicating it to core business activities instead.

If you will follow this approach, we strongly recommend you hire a firm that provides integral MEP design; if you hire separate designers for mechanical, electrical and plumbing installations, projection integration will be a daunting task.

Concluding Remarks

When optimizing the engineering design process, remember that poor team communication and frequent changes are the main factors that increase costs. With the combination of solid management practices, information technologies and strategic outsourcing, you can improve results while cutting costs. Effective communication before and during your MEP engineering project also promotes collaboration and mitigates conflict.

searches related to Fire Protection Engineering Irving Park Chicago, Illinois.

Fire Protection Engineering Jobs

(MEP) Engineering Service in Irving Park Chicago

MEP Irving Park Chicago! If you're searching for a dependable MEP Engineering in Chicago? The one to go to is is NY Engineers. Not only for MEP Engineering in Chicago but also Value Engineering and Protection Engineering throughout Irving Park Chicago. Contact us at 312 767-6877 A great number of construction companies throughout Port Chester, NY have come to rely on New York Engineers for a wide range of engineering services [...]

2018-09-01T09:35:44+00:00