MEP Engineering Services in Lake Meadows Chicago, Illinois.

Construction Engineering Companies

Building owners throughout Levittown, NY have come to depend on New York Engineers for a wide range of engineering services ranging from Fire Protection Engineering to Utility Filings. That is why property owners in Lake Meadows Chicago will tell you that if you’re looking for a dependable MEP Engineering firm in Lake Meadows Chicago, IL you need to consider New York Engineers.

Odds are, you might have walked through any particular kind of building and observed the final results of MEP Engineering. Basically, MEP focuses in the mechanical, electrical and plumbing facets of engineering. In essence, MEP already gives a clue to the most common and precise assumption of what exactly is MEP. This article will go into some infor of what is MEP Engineering.

So far as the mechanical side is concerned, for residential and commercial engineering, this relates to anything which moves. Moreover its entails the application of complex and uncomplicated machines as well as other mechanical mechanisms to perform certain tasks. Some everyday mechanical engineering jobs that may be noticed everyday are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems that cope with enhancing the energy efficiency.

The electrical element of construction is centered on the functions, components, electrical safety, and most importantly, the wiring of the building. Engineers within this branch go to great lengths to ensure the schematics of your building are created to bring enough power to every individual component in a safe manner ensuring that all the electrical codes are followed. Some commonplace electrical engineering functions can be obtained from the lighting design, regulating the voltage and distributing the energy to every component inside the building which demands a supply.

As far as plumbing, there is certainly a variety of plumbing factors that make up the final model of any building. Plumbing engineering goes deeper than simply toilets, faucets, and sinks, and accommodates several behind the scene equipments. These being the sewage and drainage lines as well as the buildings domestic water supply and just how it flows.

As we conclude this article we certainly have just considered what is MEP Engineering. MEP Engineering is managed throughout the construction industry. And, supports completing the often overlooked technical areas of any building.

Hiring an MEP Engineering Firm in Lake Meadows Chicago is Necessary for Huge Construction Projects

Using an MEP engineering firm in Streeterville Chicago, ILO, can have everything to do with the success of your construction project. These professionals will help offset the cost of making such a hiring decision in terms of energy upkeep alone. If you are speaking about large commercial buildings, energy upkeep is a vital topic of discussion. It’s time to learn various other great causes of employing MEP engineers in Belmont Heights Chicago, ILO.

Engineers have everything to do with the physical integrity of the building. As you may well envision, it means the hidden is very important. Design not just deals in looks but the foundation of a building also its components. That is certainly just another solid reason why employing an MEP engineering company will likely be beneficial to your project.

Consider each of the pipes and plumbing. Think about the heating and cooling systems and how important it is to get each one of its components inside the right places. Energy saving was mentioned, however energy competence is an additional significant term to bring up. Energy competence concerns your HVAC system, and it plays an important role in energy saving overall.

Take into consideration your building’s base. Consider setting up fire alarm systems and also the safety and security measures set up along the entire structure. With everything else mentioned up to now, it’s safe to say that many elements of building construction may be either ignored or underestimated short of MEP professionals at the job.

Now with all you have read you will look for the best MEP engineering firm in the industry, right? It’s very obvious that the best engineers need to be in the large scale building of commercial structures. Customized will be the correct term to make use of to clarify how these engineers will customize a construction job to meet the needs of your own operations. Even with all of this information you would like more information about the MEP Engineering services in Lake Meadows Chicago, Illinois by New York Engineers we invite you to stop by at our Lake Meadows Chicago CAD to Revit Modeling blog.

Latest Energy Modeling Related Blog Post

Construction Engineers Present Tips from the Passive House Institute US

Value Engineering Examples In Construction

The Passive House Institute US (PHIUS) is an organization that promotes passive building standards and best practices for construction engineers and others. They also offer certification programs for buildings and products, as well as professional certifications for architects and engineers. This article will provide an overview of some their main guidelines for passive house construction. It is important to note that, although the word “house” is used, these concepts apply for high-rise multifamily buildings and commercial facilities as well.

The PHIUS summarizes its building philosophy as “maximize your gains, minimize your losses”, focusing on achieving synergy between energy efficiency and comfort. The five main principles to consider for passive building are the following:

  1. High-performance insulation
  2. Airtight building envelope
  3. High-performance windows
  4. Using heat and moisture recovery to minimize HVAC expenses
  5. Managing solar heat gain, promoting it during the winter and reducing it during the summer

According to PHIUS, a passive building is around 5% to 10% more expensive than a conventional one, but this is compensated many times during the building lifetime through energy savings. In addition, passive buildings are more comfortable, since they eliminate two main issues affecting conventional buildings: air drafts and temperature fluctuation. In commercial settings, comfort can also lead to increase profits, by stimulating employees to be more productive.

1)   High-Performance Insulation

The main benefit of high-performance insulation is that space heating and cooling loads are reduced. As a result, HVAC systems can be sized smaller, compared with a building that uses the minimum insulation required by construction codes. A smaller HVAC system can be installed with less capital and also has a lower operating cost.

The PHIUS emphasizes the importance of avoiding thermal bridges, which are concentrated spots in the building envelope where insulation is deficient compared with the surroundings. Heat transfer tends to concentrate in thermal bridges, causing unwanted heat gain in the summer and heat loss in the winter.

Current building codes are limited when addressing thermal bridges, since their specifications are based on U-values for insulation and one-dimensional modeling of thermal envelopes. Thermal bridges are a complex three-dimensional phenomenon that can be addressed more effectively with the building modeling software utilized by knowledgeable construction engineers.

2) Airtightness

Air leaks can be just as detrimental as poor insulation when it comes to building envelope performance. Any air exchange between conditioned and unconditioned spaces causes heating and cooling equipment to work harder. Air leakage tends to be more common around windows, doors, plumbing fixtures and electrical fixtures.

In existing constructions, air leakage can be addressed effectively with caulking and weatherstripping. Both have the same purpose, which is blocking spaces where air leakage occurs. The main difference is that caulking is designed for fixed elements like plumbing and electrical fixtures, while weatherstripping is designed to tolerate friction in moving elements like doors and windows. However, caulking should be used for the external edges of door and window frames, which are not subject to relative motion. In new constructions, airtightness can be built into the envelope during the project construction phase.

3) High-Performance Windows

Significant heat transfer occurs through windows, even when the surrounding walls are well insulated. High-performance windows are one of those energy efficiency upgrades that can be deployed in existing constructions, but which is much more cost-effective in new buildings.

  • In an existing building, the upgrade cost is the full price of the window plus the associated labor cost.
  • In new constructions, there is a baseline window and labor cost that is unavoidable, and only the price premium of a high-performance window is considered for financial analysis.

The most energy-efficient windows in the market currently use a triple pane, inert gas to fill the two resulting spaces, a fiberglass frame and low-emissivity coating for the glass. Double pane windows apply the same concept, giving up on part of the energy efficiency to achieve a lower price. However, both triple-pane and double-pane windows are much more efficient than conventional models with single uncoated sheets of glass and metallic frames. A double-pane window is around 50% more efficient than a conventional one, while a triple-pane window provides an efficiency boost of 20-30% compared with a double-pane one.

4) Heat and Moisture Recovery

Since HVAC systems have the goal of controlling temperature and humidity, a higher efficiency can be achieved if the exhaust air is used to precondition the intake air. Heat-recovery ventilation (HRV) only exchanges heat between the supply and exhaust airstreams, while energy-recovery ventilation (ERV) exchanges heat and moisture. The operating principle is reversed for summer and winter conditions:

  • Outdoor air tends to be warmer and more humid during the summer. Therefore, the exhaust air can be used to remove some of its heat and moisture. This reduces the HVAC load and improves energy efficiency.
  • Outdoor air is cool and dry during the winter, so the exhaust air can be used to preheat and humidify it before reaching the HVAC system. This also achieves a load reduction.

5) Solar Heat Gain Optimization

Managing solar heat gain can be tricky. It is beneficial during the winter since it reduces the load on space heating systems; however, during the summer it increases cooling load and must, therefore, be minimized. Also, solar glare should be avoided regardless of the time of the year – it causes discomfort and distraction while having the potential to damage human vision.

Window shades are a simple and effective measure to control solar heat gain. The sun is higher in the sky during the summer, and shades block a larger portion of its radiation. The sun’s altitude drops as winter approaches, and more radiation enters the building, reducing space heating loads. In some locations in the northern hemisphere, is important to note that south-facing windows get the most sunshine throughout the year, and north-facing windows get the least. East-facing windows receive plenty of sunshine during the morning and west-facing windows during the afternoon. Windows should be arranged so that the sun itself is not in direct line-of-sight for occupants. Greater control is possible with optimal building orientation, window shades, and well-placed vegetation.

Construction Engineers Make These Final Recommendations

Developers interested in a passive building can achieve the best results by working with certified design professionals. For example, the Passive House Institute US has the Certified Passive House Consultant (CPHC) program. There are more than 1,300 CPHCs in the USA, and they have been extensively trained in energy modeling software and passive building while considering the variety of climate zones in the USA. The US Green Building Council also offers the LEED certification for construction engineers and other professionals, where many topics covered deal with energy-efficient construction.

searches related to Engineering Reports Lake Meadows Chicago, IL.

HVAC Engineering Companies

(MEP) Engineering Service in Lake Meadows Chicago

How Can Our Lake Meadows Chicago MEP Engineers Help You! Quite a few developers throughout White Plains, New York have come to rely on NY-Engineers.Com for a wide range of engineering services ranging from Sprinkler Engineering to Engineering Reports. For this reason developers in Lake Meadows Chicago will tell you that if you're seeking a top-rated MEP Engineering firm in Lake Meadows Chicago, Illinois you should consider New York Engineers. A MEP [...]

2018-09-20T02:18:56+00:00