MEP Service in LeClaire Courts, IL.

Contact Us

In search of the best MEP Firms in Chicago? Your best bet is to reach out to is NY Engineers. Not only for MEP Firms in Chicago but also Electrical Engineering and Sprinkler Engineering in LeClaire Courts. Call us at 312 767-6877

Contact Us
HVAC Engineering Salary

Construction companies throughout Ronkonkoma, New York have come to rely on NY Engineers for a wide range of engineering services ranging from Sprinkler Engineering to Building Commissioning. This is why construction companies in LeClaire Courts will tell you that if you are looking for a dependable MEP Engineering firm in LeClaire Courts, Illinois you need to consider New York Engineers.

Odds are, you might have walked through any particular sort of building and saw the results of MEP Engineering. In other words, MEP focuses on the mechanical, electrical and plumbing facets of engineering. Basically, the name already gives a clue to the most prevalent and spot-on theory of what exactly is MEP. This article goes into some information on what is MEP Engineering.

As far as the mechanical side is concerned, for both residential and commercial engineering, this deals with anything which moves. Furthermore its involves the application of complex and straightforward machines and also other mechanical mechanisms to do certain tasks. Some normal mechanical engineering tasks which can be noticed everyday are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems which take care of boosting the energy efficiency.

The electrical facet of construction is centered on the functions, components, electrical safety, and even more importantly, the wiring for any building. Engineers with this sector go to great lengths to make certain that the layout of a building are meant to bring ample electricity to every component in a safe manner ensuring that each of the electrical codes are followed. Some familiar electrical engineering tasks are available in the lighting design, modifying the voltage and allocating the energy to each and every component of structure that demands a supply.

With regards to plumbing, there is a wide array of plumbing factors that constitute the final style of any building. Plumbing engineering goes deeper than simply sinks, faucets, and toilets, and holds many behind the scene devices. These being the drainage line and sewage plus the buildings local water supply and how it flows.

As we conclude this article we have just reviewed what is MEP Engineering. MEP Engineering is administered within the construction industry. And, helps with completing the often overlooked technical facets of any building.

Hiring an MEP Engineering Firm in LeClaire Courts is Necessary for Large Construction Projects

Hiring an MEP company in River North Chicago, ILO, could have everything to do with the success of your construction project. These experts might help offset the price of making this sort of hiring decision in terms of energy saving alone. If you are referring to big commercial structures, energy upkeep is a vital topic of discussion. It’s time to determine some other great reasons for employing MEP engineering company in Chinatown Chicago, Illinois.

Engineers have everything to do with the physical integrity of any building. As you can well imagine, this means the hidden is extreamly vital. Design not merely deals in looks but the groundwork of a building including its components. That is the next solid reason why employing an MEP engineering firm will likely be good for your project.

Take into consideration all the pipes and plumbing. Look at the cooling and heating systems and how important it is to get all of its components in the right places. Energy saving was mentioned, and energy efficiency is another important term to bring up. Energy competence concerns your HVAC system, plus it plays a vital part in energy maintenance as a whole.

Take into consideration your building’s footing. Consider the installation of security systems and also the security and safety measures set up through the entire structure. With everything else mentioned thus far, it’s reliable advice that lots of facets of building construction could be either ignored or minimized short of MEP experts at the job.

Now with all you know you are going to look for the best MEP engineering company available, right? It’s pretty clear the best engineers need to be active in the large construction of commercial buildings. Personalized will be the proper term to make use of to illustrate just how these engineers will adapt a construction project to meet the requirements of the operations. There’s only so much you can save this page if you would like more info about the MEP Engineering services in LeClaire Courts, IL by NY Engineers you should stop by at our blog.

Latest Mechanical Engineering Related Post

How Mechanical Engineers Compare Operating Expenses of Different Water Heater Models

Value Engineering Techniques

One of the key characteristics to consider when deciding between several water heater options is the operating cost; the heater with the lowest price tag is not necessarily the least expensive to own in the long term. Operating cost is determined in great part by equipment efficiency, but there are other equally important factors that mechanical engineers want you to consider:

  • Energy sources have different unit prices. In the case of heating systems, the input is generally electricity, natural gas, propane or fuel oil. There are also zero-cost energy sources, such as geothermal energy and sunlight.
  • Operating schedules may vary depending on the type of heater. Rated power is not the only factor that determines total energy consumption; the operating schedule must also be considered. For example, tankless water heaters have a high rated power but operate in short bursts, saving energy compared to a storage heater that draws less power but operates continuously, assuming the energy source is the same.

This article will provide a guide for calculating and comparing operating expenses with different types of heaters. After these values are calculated, they can be weighed against the upfront cost of each heating system to find the most cost-effective option.

As with any investment in equipment, considering the total ownership cost is very important when purchasing a heater: to calculate the real heating cost per BTU or kWh produced, it is necessary to factor in the initial investment and any maintenance or reparation expenses. For instance, saying that solar heating is free would not be completely true; although the energy input is free, there are equipment and installation costs, and in multistory buildings a small pump may be required for water to reach the rooftop.

Energy Factor: How Mechanical Engineers Calculate Heating Expenses

The energy factor (EF) is the ratio of heating output to energy input offered by a heating system. It considers how effectively the heater converts its energy input into an increase in water temperature, but also accounts for other aspects of heater operation:

  • Standby losses – These losses are found in storage heaters, and they represent the heat loss associated with keeping the water in the tank at the desired temperature. Although proper insulation mitigates standby losses, they are impossible to eliminate completely.
  • Cycling losses – These losses occur as water circulates through the heater’s internal piping, and through the storage tank if present.

Heaters running on fossil fuels have energy factors well below unity, electric tankless heaters operate close an EF of 1, and heat pumps have EF values higher than unity because their inverse refrigeration cycle allows them to draw heat from the surrounding environment.

Comparing Water Heaters: An Example

Assume you are presented with four water heaters for a household that consumes 80 million BTU per year, and want to calculate the operating costs associated with each alternative:

  • A gas-fired storage heater with an EF of 0.55
  • A tankless electric heater with an EF of 0.97
  • A tankless gas heater with an EF of 0.80
  • An electric air-source heat pump with an EF of 2.5

Since the example is for one city, assume the cost of natural gas is $1.20 per 100,000 BTU, and the electricity rate is $0.18 per kilowatt-hour.

  • For the gas heaters, the calculation procedure can be carried out directly because the heating output and energy input are both in BTU.
  • The tankless electric heater and heat pump run with electricity, so the heating output must be converted to kWh before proceeding.
  • Heating Output (kWh)=80,000,000 BTU x 1kWh/3412.14 BTU= 23,446 kWh

Other than this, the calculation procedure is the same for all four heaters. The yearly heating output is divided by the energy factor (EF) to calculate yearly energy consumption, and this value is then multiplied by the unit price of energy, per kWh or BTU. This formula is applied by mechanical engineers to all four water heaters, to determine which is the least expensive to operate.

Gas-fired storage heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.55×1.20 USD/100,000 BTU=1745 USD

Tankless electric heater operating cost:
Operating Cost (USD/yr)=23,446 kWh/.97X.18 USD/kWh=4351 USD

Tankless gas heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.8 X 1.20 USD/100,000 BTU=1200 USD

Electric air-source heat pump operating cost:
Operating Cost (USD/yr)=23,446 kWh/2.5 X .18 USD/kWh=1688 USD

Operating Cost Comparison

In this case, the tankless gas heater has the lowest operating cost. The heat pump and gas-fired storage heater follow, although the heat pump wins by a slight margin. The tankless electric heater is the most expensive to operate by far.

Total Cost of Owning and Operating Heaters

For a full evaluation, the upfront cost and service life must be considered as well. For this example, assume the following cost and rated life values:

HeaterInstalled CostService life
Heat Pump$180015
Tankless electric heater$150020
Tankless gas heater$200020
Gas-fired storage heater$120010

For simplicity, the analysis will be limited to upfront and operation costs. The yearly ownership cost of each heater option would be:

  • Heat Pump Cost = $1688/year + ($1800/15 years) = $1808/year
  • Tankless Electric Heater = $4351/year + ($1500/20 years) = $4426/year
  • Tankless Gas Heater = $1200/year + ($2000/20 years) = $1300/year
  • Gas-Fired Storage Heater = $1745/year + ($1200/10 years) = $1865/year

The tankless gas heater is still the winner in this case, despite its higher upfront cost. The heat pump and gas-fired storage heater have a similar cost of ownership, and the tankless electric heater is very expensive to operate due to the high electricity rates of some cities. However, keep in mind this is just an example, and different results may be obtained for different locations.

Concluding Remarks

To determine which type of heater is the best match for your property, getting a professional assessment from one or more mechanical engineers is highly recommended. For example, if you don’t have a chimney, the installation cost of any gas heater will increase significantly. Remember that electricity and gas prices also vary by location, and what is true in one location may not always apply in another city or state.

Popular searches related to Plumbing Engineering LeClaire Courts, Illinois.

Electrical Engineering Basics

(MEP) Engineering Service in LeClaire Courts

MEP LeClaire Courts! When you're looking for a competent MEP Firms in Chicago? The top choice is is NY Engineers. Not only for MEP Firms in Chicago but also Value Engineering and Sprinkler System Engineering in or near LeClaire Courts. Call us at (+1) 312 767.6877 Successful building owners throughout Kingston, NY have come to rely on NY Engineers for a wide range of engineering services ranging from Mechanical Engineering to [...]

2018-09-03T23:43:56+00:00