MEP Engineering Services in Lincoln Park Chicago, IL.

Electrical Engineering Careers

Construction companies throughout West Seneca, NY have come to depend on NY Engineers for a wide range of engineering services ranging from MEP Engineering to Construction Administration. For this reason real estate investors in Lincoln Park Chicago will tell you that if you are looking for a excellent MEP Engineering firm in Lincoln Park Chicago, Illinois you need to consider NY-Engineers.Com.

Odds are, you might have walked through any particular sort of building and observed the outcomes of MEP Engineering. To put it simply, MEP concentrates in the mechanical, electrical and plumbing areas of engineering. Basically, MEP already gives a clue to the most common and correct theory of exactly what is MEP. Our article will go into some specifics of what is MEP Engineering.

So far as the mechanical aspect is involved, both for commercial and residential engineering, this works with anything which moves. Additionally its involves the usage of complex and uncomplicated machines as well as other mechanical mechanisms to execute certain tasks. Some normal mechanical engineering tasks which can be noticed on a day to day bacis are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems which cope with improving the energy productivity.

The electrical aspect of construction is focused on the functions, components, electrical safety, and most importantly, the wiring of the building. Engineers in this particular unit try very hard to ensure the schematics of any building are created to supply enough power to every component in a safe manner ensuring that all of the electrical codes are followed. Some commonplace electrical engineering tasks can be obtained from the lighting design, regulating the voltage and distributing the energy to every component inside the structure which demands a supply.

plumbing, there is a wide array of plumbing components that make up the final design of any structure. Plumbing engineering goes deeper than only toilets, faucets, and sinks, and holds many behind the scene appliances. These being the sewage and drainage lines and also the buildings household water supply and just how it flows.

As we wrap up our article we have just checked out what is MEP Engineering. MEP Engineering is managed within the construction industry. And, assists in completing the easily overlooked technical aspects of any building.

Hiring an MEP Engineering Firm in Lincoln Park Chicago is Necessary for Huge Construction Projects

Using an MEP engineering company in Mayfair Chicago, Illinois, can have everything to do with the success of your construction project. These pros will help offset the fee for making this sort of hiring decision with regards to energy management alone. While you are speaking about big commercial buildings, energy upkeep is really a topic of discussion. It’s time to discover another great factors behind employing MEP engineers in Parkview Chicago, ILO.

Engineers have a lot to do with the structural reliability of a building. If you can well envision, this means the hidden is very important. Design not simply deals in looks but the underpinning of a building and its components. That is the next solid reason why using an MEP engineering firm is going to be useful to your project.

Consider all the pipes and plumbing. Think about the air conditioning systems and the importance of getting all its mechanics inside the right places. Energy saving was discussed, but energy competence is another vital term to bring up. Energy competence concerns your HVAC system, and it plays a vital part in energy maintenance as a whole.

Take into consideration your building’s shell. Consider installing home security systems and the security and safety measures put in place through the structure. With everything else mentioned to date, it’s reliable advice that numerous aspects of building construction could be either ignored or minimized short of MEP professionals on the job.

Now with this info you are going to look to get the best MEP engineering firm available, right? It’s very clear how the best engineers really need to be involved in the large construction of commercial structures. Customized is the right term to utilize to clarify the way in which these specilists will alter a construction project to meet the requirements of your own operations. There’s only so much you can save this page if you would like additional information about the MEP Engineering services in Lincoln Park Chicago, IL by NY Engineers we invite you to take a look at our Lincoln Park Chicago Value Engineering blog.

Sprinkler Engineering Related Blog Article

Heating and Cooling Upgrades: Where to Start? Architectural Engineers Have This Advice

MEP Mechanical

Space heating represents the highest energy use in many buildings. In addition, domestic hot water and space cooling systems use less energy than space heating, but they are also among the top five building systems that use the most energy. According to architectural engineers, a building can reduce its energy consumption dramatically by replacing its existing heating and cooling systems with modern and high-efficiency equipment.

However, before proceeding with a large-scale building upgrade it is necessary to define a starting point. Building upgrades are investments after all, where the property owner spends capital with the goal of achieving a permanent reduction in building ownership cost. In other words, building system upgrades only make sense from the financial standpoint if the long-term benefit outweighs the associated upfront expenses.

Is There an Upcoming Major Renovation?

Heating and cooling upgrades provide long-term benefits but can be disrupting for building operation. If a major renovation is planned in the short term, it represents an excellent chance to also improve HVAC performance.

A major renovation also provides an excellent chance to improve the building envelope, architectural engineers advise. Poor insulation and air leaks can be detected and fixed, reducing the required heating and cooling capacity after the renovation. This way, the new heating and cooling systems can be specified not only with a higher efficiency, but also with a lower capacity.

  • For example, if you replace a 100-ton air-cooled chiller consuming 1.2 kW/ton with a more efficient water-cooled unit that only uses 0.6 kW/ton, you achieve 50% energy savings.
  • However, if the new unit has a required capacity of only 80 tons thanks to building envelope improvements, energy savings are increased to 60%.

A building envelope improvement can be complemented with a lighting system upgrade. Solid-state LED lighting emits significantly less heat than incandescent, halogen or old fluorescent lighting. All this heat is subtracted from space cooling loads, providing additional energy savings beyond those achieved directly with the lighting upgrade.

Consider that a 60-watt incandescent bulb can generally be replaced with a 10-watt LED bulb, and a 4-lamp T12 fluorescent fixture (4x 34W) can generally be replaced with an integral LED fixture consuming 40-45W. The lighting heat reduction is not significant for a single fixture, but can save several tons of cooling capacity in a building with hundreds of inefficient fixtures.

Building Upgrades: Cost and Benefit

When upgrading a building it can be tempting to prioritize space heating systems, since they consume the most energy. However, it is also important to consider the energy source used by each appliance.

For a given amount of energy delivered, electricity is far more expensive than gas in major cities. Natural gas from Con Edison has a price of around 1.05 USD per therm for residential users, which translates to approximately 3.6 cents per kWh of heat, before considering appliance efficiency. On the other hand, electricity prices typically exceed 20 cents per kWh. Even if most combustion appliances are less efficient than electric appliances, the price of electricity is too high compared with that of gas. This effect is evident in electric resistance heaters, which are around four times more expensive to operate than gas heaters.

Property owners can achieve the best results by getting a professional energy audit before deciding which building upgrades to carry out. With an energy audit, property owners can get a detailed breakdown of energy efficiency measures, along with the expected cost of each. More importantly, an energy audit helps determine the return on investment for each energy efficiency measure – how many dollars will it return over its service life for each dollar spent upfront? Given the price gap between electricity and gas, upgrades that target electric system generally offer a shorter payback period and a higher ROI.

Before proceeding with any building upgrade, checking the Con Edison incentive program is highly advised. Many energy efficiency measures are eligible for attractive cash rebates, which further improves their financial performance. Consider that some rebate programs only apply during certain times of the year or have limited funding, so building upgrades should be planned accordingly.

Importance of Building Type to Architectural Engineers

Not all buildings consume energy the same way. For example, mechanical ventilation typically represents around 13% of energy use in office buildings, but only 1% in multifamily residential settings. This is a consequence of the requirements established by construction codes for each property type – natural ventilation design is mandatory in residential constructions, but designers can choose between natural and mechanical ventilation for office buildings. Domestic hot water systems experience the opposite effect as ventilation systems, representing only 2% of energy use in office buildings but 19% in multi-family residential buildings.

Differences like this are present for many building systems. For example, office occupancy is normally higher than residential occupancy during the day, which extends lighting and space cooling schedules for office buildings, and the corresponding energy expense. However, this does not mean lighting and cooling upgrades should be discarded in the residential sector: these systems represent a reduced percentage of energy consumption but are typically older than those found in office buildings, which can result in an attractive financial return.

Final Recommendations

When deciding which cooling and heating upgrades to prioritize, it is very important to select an adequate time frame for the project, and getting an energy audit to determine the cost and benefit of each measure. Ideally, deep retrofits should be scheduled along with major renovations to minimize disruption and cost. It is also important to find synergy between upgrades, for example when both lighting and space cooling are upgraded. Of course, the financial return is also a very important consideration: as a property owner you will want to prioritize measures that maximize the return on each dollar invested.

In general, energy efficiency measures that target electric systems will have a better financial performance than those targeting gas-fired systems. Nevertheless, there are exceptions to this; an energy audit of the building is the best way to tell, agree experienced architectural engineers.

Common searches related to Value Engineering in Lincoln Park Chicago, Illinois.

Value Engineering Process Steps

(MEP) Engineering Service in Lincoln Park Chicago

How Can Our Lincoln Park Chicago MEP Engineers Help You! Several builders throughout West Hempstead, New York have come to depend on New York Engineers for a wide range of engineering services ranging from Sprinkler Engineering to Utility Filings. This is why building owners in Lincoln Park Chicago will tell you that if you're seeking a top-rated MEP Engineering firm in Lincoln Park Chicago, IL you need to consider NY Engineers. A [...]

2018-09-24T12:56:02+00:00