MEP Service in Lombard, Illinois.

Contact Us

Looking for a top MEP Engineering in Chicago? Your best bet is to contact is NY Engineers. Not only for MEP Firms in Chicago but also Architectural Engineering and Protection Engineering near Lombard. Call (312) 767-6877

Contact Us
What Do Mechanical Engineers Do

Construction companies throughout Levittown, New York have come to depend on NY Engineers for a wide range of engineering services ranging from Mechanical Engineering to CAD to Revit Modeling. For this reason building owners in Lombard will tell you that if you’re seeking a top-rated MEP Engineering firm in Lombard, Illinois you need to consider New York Engineers.

Odds are, you might have walked through any specific kind of building and witnessed the final results of MEP Engineering. Basically, MEP centers on the mechanical, electrical and plumbing aspects of engineering. In essence, the name already gives a clue to the most typical and correct notion of exactly what is MEP. This article will go into some infor of what is MEP Engineering.

As far as the mechanical aspect is concerned, for both commercial and residential engineering, this handles anything which moves. In addition its entails the usage of complex and easy machines along with other mechanical mechanisms to carry out certain tasks. Some common mechanical engineering jobs that may be noticed everyday are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems which handle boosting the energy efficiency.

The electrical part of construction is focused on the functions, components, electrical safety, and most importantly, the wiring for any building. Engineers in this branch go to great lengths to make sure that the schematics of any building are designed to deliver adequate electricity to each individual component in a safe manner ensuring that each of the electrical codes are met. Some familiar electrical engineering jobs can be found in the lighting design, regulating the voltage and allocating the power to each and every component of building which requires a supply.

With regards to plumbing, there is certainly a wide array of plumbing factors which constitute the final model of any building. Plumbing engineering goes deeper than simply sinks, faucets, and toilets, and houses several behind the scene equipments. These being the drainage line and sewage as well as the buildings domestic water supply and just how it flows.

As we conclude this article we have now just considered what is MEP Engineering. MEP Engineering is administered within the construction industry. And, assists in completing the simply overlooked technical elements of any building.

Hiring an MEP Engineering Firm in Lombard is Important for Large Construction Projects

Employing an MEP company in Budlong Woods Chicago, Illinois, can have everything to do with the safety of your construction project. These professionals may help offset the price of making this sort of hiring decision in relation to energy management alone. When you are speaking about big commercial buildings, energy management is an important topic of discussion. It’s time to find out another great factors behind using MEP firm in North Lawndale Chicago, Illinois.

Engineers have a great deal to do with the structural integrity of your building. As you can well imagine, that means the unseen is very essential. Design not simply deals in aesthetics but the underpinning of a building and its mechanism. That is just another solid logic why using an MEP engineering company will likely be good for your project.

Think about each of the pipes and plumbing. Consider the heating and air conditioning systems and the importance of getting all of its mechanics inside the correct places. Energy maintenance was stated, however energy competence can be another significant term to bring up. Energy efficiency concerns your HVAC system, and it plays an important part in energy saving as a whole.

Take into consideration your building’s foundation. Consider the installation of security alarms and also the security and safety measures put in place through the entire structure. With everything talked about thus far, it’s safe to say that numerous aspects of building construction may be either ignored or underestimated short of MEP engineers on-the-job.

Now with this info you are going to look for the best MEP engineering company in the market, right? It is pretty obvious that the best engineers must be in the large building of commercial structures. Tailor made will be the right term to utilize to explain how these engineers will alter a construction project to meet the requirements of your own operations. There is a great possibility you would like more information about the MEP Engineering services in Lombard, IL by NY-Engineers.Com we invite you to visit at our blog.

Latest Sprinkler Engineering Related Blog Post

US Department of Energy: Electrical Engineering Efficiency Standards for Appliances and Equipment

Mechanical Engineering Job Description

Energy and electrical engineering in all its forms are complex technical topics, and for the general public it can be hard to tell which products are energy efficient. The US Department of Energy (DOE) has been creating and enforcing standards since 1979 to ensure that appliances and equipment provide value for customers. This has been one of the most effective energy efficiency policies ever implemented by the US, yielding billions of dollars in energy savings each year.

As of 2017, the US Department of Energy publishes standards for more than 60 product categories, which account for more than 90% of residential energy consumption, 60% of commercial energy consumption, and 30% of industrial energy consumption. In addition, the DOE updates its procedures every seven years to keep up with the pace of technological development. These testing procedures are also used by the ENERGY STAR program, which showcases the most efficient products in the market, and is a joint effort by the US Department of Energy and Environmental Protection Agency (EPA). The main differences between both programs are the following:

  • The Appliance and Equipment Standards Program is mandatory and enforced by federal laws. If a product is part of a regulated category and is found to be non-compliant, it cannot be sold legally in the US.
  • The ENERGY STAR program is more demanding in its performance requirements, but voluntary. However, labeling is required by some rebate programs for energy-efficient equipment. The program has a category called ENERGY STAR Most Efficient, which lists the top-performing equipment year by year.

Achievements of the DOE Standards Program

Thanks to the DOE Appliances and Equipment Standards Program, energy consumers are expected to achieve cumulative savings of $1 trillion by 2020, and $2 trillion by 2030. In 2015 alone, US homes and businesses saved approximately $63 billion in energy expenses thanks to the program.

In the absence of DOE standards, the average US household would spend $321 more on energy each year. In addition, since testing procedures and standards are under constant improvement, annual household savings are expected to increase to $529 by 2030. The following are some of the home appliances that have achieved the largest efficiency improvements since the US DOE started regulating them:

  • Compared with 1973 models, modern refrigerators only consume 25% of the energy while offering 20% more storage space and having a retail price that is 50% lower.
  • Since 1990, energy use has been reduced by 70% for clothes washers, 40% for dishwashers, 50% for air conditioners and 10% for furnaces.

To keep up with the pace of technological development, the US DOE reviews its approved testing procedures every seven years, and standards are reviewed every six years. This helps manufacturers schedule their product launches more effectively, since the publication of reviewed standards and testing procedures follows a predictable timeframe.

How the DOE Chooses Which Products to Regulate

When deciding which appliances and equipment to cover in its standards, the DOE considers the average energy consumption of the product in question and its total energy use throughout the US. They also analyze the technological and economic implications of energy efficiency improvements, and only proceed with those that are considered feasible.

There are many occasions where a specific product category is found to have significant potential for energy efficiency improvement, but a labeling program may be enough to achieve the required performance level. In these cases, the DOE may decide that a full standard is not necessary and that a labeling program is enough.

How Manufacturers and Electrical Engineering Experts Can Manage their Certification Process

Although DOE standardization may seem like a burden for manufacturers and others involved in electrical engineering, it is actually beneficial because they can deal with a single regulating entity, rather than having to meet fragmented standards from many institutions. In fact, no agency is allowed to regulate products already covered by DOE standards, unless a waiver is granted by the DOE itself.

The US DOE developed an online tool called the Compliance Certification Management System (CCMS). Through this platform, manufacturers and authorized third-parties can create, submit and track reports completely through the Internet. The system has a Microsoft Excel template for each product category to speed up the certification process, and submissions are automatically directed to the corresponding area of the DOE’s Building Technologies Office for review.

Once a submission has been approved, it is published through another online tool called the Compliance Certification Database, where certification reports and compliance statements can be browsed and filtered by product category. The US DOE updates the database every two weeks, adding any new products that were reviewed and certified after the last update. This database ensures that all key certification information is readily available for manufacturers, as well as their business partners and clients.

The eeCompass Platform For Customers

Even with certified products, a customer may not get the best performance if the equipment selected is not a suitable match for the intended application. Therefore, the DOE has created the eeCompass website to help customers make informed decisions regarding their energy-consuming appliances.

The eeCompass platform covers more than 2 million products and allows users to search and compare them by model number, manufacturer or key performance metrics.

The US Department of Energy holds meetings where the general public is invited to comment on proposed changes to testing procedures and standards. Meeting dates are published in the Building Technologies Office website, and participation can be in-person or online.

By making sure their electrical engineering professionals and other contractors only use compliant equipment, property management companies can guarantee energy efficiency in their building systems, while also making indoor spaces safer for occupants.

Top searches related to CAD to Revit Modeling Lombard, IL.

Architectural Engineering Colleges

(MEP) Engineering Service in Lombard

MEP Company Lombard! If you re looking for a dependable MEP Firms in Chicago? The top choice is is NY Engineers. Not only for MEP Engineering in Chicago but also Mechanical Engineering and Sprinkler Design Engineering throughout Lombard. Call (+1) 312 767-6877 Quite a few construction companies throughout North Amityville, New York have come to rely on New York Engineers for a wide range of engineering services ranging from Plumbing Engineering [...]

2018-09-14T11:19:52+00:00