MEP Engineering Services in Marshall Square Chicago, Illinois.

MEP Consulting Engineers

Building owners throughout Tonawanda, New York have come to rely on New York Engineers for a wide range of engineering services ranging from MEP Engineering to Engineering Reports. For this reason building owners in Marshall Square Chicago will tell you that if you are searching for a top-rated MEP Engineering firm in Marshall Square Chicago, IL you should consider NY Engineers.

No doubt, you have walked through any specific kind of building and witnessed the outcomes of MEP Engineering. Simply put, MEP centers around the mechanical, electrical and plumbing elements of engineering. In simple terms, MEP already gives a clue to the most common and spot on notion of what exactly is MEP. Our article may go into some information on what is MEP Engineering.

So far as the mechanical part is concerned, both for residential and commercial engineering, this works with anything that moves. Moreover its entails the use of complex and uncomplicated machines and also other mechanical mechanisms to do certain tasks. Some ordinary mechanical engineering jobs which may be noticed regularly are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems that deal with improving the energy efficiency.

The electrical element of construction is focused on the components, functions, electrical safety, and even more importantly, the wiring for any building. Engineers in this branch go to great lengths to ensure that the schematics of any building are designed to supply enough power to each individual component in a safe manner ensuring that all of the electrical codes are met. Some commonplace electrical engineering tasks are available in the lighting design, modifying the voltage and allocating the energy to every component inside the building which demands a supply.

So far as plumbing, there exists a variety of plumbing components that constitute the final form of any structure. Plumbing engineering goes deeper than only faucets, toilets, and sinks, and contains many behind the scene equipments. These being the sewage and drainage lines plus the buildings domestic water supply and just how it flows.

As we wrap up our article we have now just reviewed what is MEP Engineering. MEP Engineering is administered throughout the construction industry. And, assists in completing the often overlooked technical aspects of any building.

Hiring an MEP Engineering Firm in Marshall Square Chicago is Essential for Large Construction Projects

Hiring an MEP engineering company in Polish Village Chicago, ILO, might have a whole lot to do with the prosperity of your construction project. These pros will help offset the price of making this sort of hiring decision with regards to energy upkeep alone. If you are speaking about large commercial buildings, energy saving is really a topic of discussion. It’s time to discover another great causes of using MEP engineers in Homan Square Chicago, ILO.

Engineers have everything to do with the structural integrity of the building. If you may well imagine, that means the unseen is extreamly essential. Design not simply deals in looks but the basis of a building including its workings. That is certainly just another solid good reason that hiring an MEP engineering company will probably be good for your project.

Think about each of the pipes and plumbing. Look at the heating and cooling systems and the importance of getting all of its mechanics inside the correct places. Energy maintenance was discussed, however energy competence is an additional vital term to bring up. Energy efficiency is related to your HVAC system, and it plays a vital part in energy maintenance in general.

Consider your building’s base. Consider the installation of security alarms and the safety and security measures put in place throughout the structure. With everything discussed to date, it’s safe to say that many elements of building construction could be either ignored or underestimated short of MEP engineers at the job.

Now with all you know you will look to get the best MEP engineering firm in the industry, right? It is very clear that the best engineers really need to be working in the large building of commercial structures. Customised is definitely the proper term to work with to explain how these specilists will alter a construction project to meet the needs of your own operations. Even with all of this information you would like more info about the MEP Engineering services in Marshall Square Chicago, IL by New York Engineers you should check out at our Marshall Square Chicago Engineering Reports blog.

Latest Building Commissioning Related Post

Architectural Engineers Detail Ventilation System Configurations

MEP Meaning

Human activity generates a broad range of compounds that become dangerous in high-enough concentrations, and pollutants from outdoor sources can also degrade indoor air quality. Architectural engineers are often charged with the job of preventing this from occurring as much as possible.

Ventilation systems keep these substances at low levels by constantly renewing indoor air, and they also contribute to keeping moisture within the range of 30 to 60 percent as recommended by ASHRAE. Without ventilation, it would not be possible to keep indoor environments comfortable and healthy.

Natural ventilation relies on wind currents, outdoor temperature and other weather conditions to supply fresh air. The advantage of natural ventilation is that it comes for free, and in new buildings it is possible to optimize architectural design to maximize its effects. However, natural ventilation is uncontrollable, and generally insufficient to fully meet the requirements of modern buildings.

Normally, to meet ASHRAE standards and local building codes, mechanical ventilation must be deployed. Depending on their configuration, whole-house ventilation systems can be classified into three main types:

  • Exhaust ventilation systems, which only use extractor fans.
  • Supply ventilation systems, which only use injector fans.
  • Balanced ventilation systems, which use both injector and extractor fans.

Balanced systems can be enhanced with energy-recovery ventilation, a technology that exchanges energy between the supply and exhaust airflows to maximize performance and minimize the overall running cost of the system.

Exhaust Ventilation Systems

As implied by their name, exhaust ventilation systems only deploy extractor fans. When the system starts to run, it creates a negative pressurization effect in occupied spaces, drawing in fresh outdoor air to renew that which is exhausted. It is important to note, however, that exhaust ventilation is not possible in air-tight buildings, since outdoor air must be allowed to leak in. If the building envelope has been tightened with caulking and weather stripping, exhaust ventilation must be complemented with intake vents.

Exhaust ventilation systems have a single set of fans and ducts, which makes them affordable while reducing their installation time and cost. Energy expenses are relatively low because there is only one set of fans in operation, and maintenance is simplified as well. The system layout can be designed to target specific areas where pollutants are generated, ensuring they are removed before they spread indoors.

Exhaust ventilation generally achieves the best results in cold and dry climates, where outdoor air does not require dehumidification. It is not recommended for tropical and mixed climates, because warm and humid outdoor air is drawn in without control, driving up cooling and dehumidification expenses. Also, keep in mind that depressurization draws air from all surrounding spaces, with little control over pollutant content. In general, architectural engineers recommend exhaust ventilation for cold weather, and when outdoor air pollution is low.

Another risk of exhaust ventilation is backdraft, which occurs when a combustion-based appliance suddenly draws in a lot of air, potentially causing a flashover. Since exhaust ventilation causes negative pressurization and does not control air supply, there is an increased chance of backdraft.

Supply Ventilation Systems

Supply ventilation only uses injector fans, pressurizing rooms and causing indoor air to leak out constantly. The main advantage of supply ventilation is control, since outdoor air can be filtered, humidified or dried as needed. In addition, the pressurization effect prevents the inflow of pollutants from surrounding spaces or from outdoors.

Another benefit of supply ventilation is that it eliminates the risk of backdraft from combustion appliances due to positive pressurization. Installation, operation and maintenance expenses are also reduced thanks to the simple system configuration.

Supply ventilation is better suited for tropical or mixed climate conditions, where dehumidification and filtering are often required. This configuration tends to cause trouble in cold weather, since the pressurization effect can cause condensation of indoor air humidity, leading to moisture accumulation and its common side-effects: furniture damage and the proliferation of mold, bacteria and dust mites.

Balanced Ventilation Systems

A balanced ventilation system is the result of combining exhaust and supply ventilation: both airflows can be controlled, providing the benefits of both system configurations. Of course, this comes at a higher installation and operation cost, since there are now two sets of fans and ducts.

Balanced ventilation is suitable for all weather conditions, and airflows can be adjusted to provide any pressurization effect as required – positive, negative or neutral. The recommended locations for each set of ducts are the following:

  • Supply ducts should focus on areas where occupants spend most of their time, including living rooms and bedrooms. This ensures that these areas always have a supply of fresh and clean air.
  • Exhaust ducts should focus on areas where moisture and humidity are released frequently, such as kitchens, bathrooms, laundries and boiler rooms.

Of course, it is possible to install supply and exhaust rooms for every room, but system costs are increased significantly. With the approach presented above, system costs are optimized without compromising performance.

Energy-Recovery Ventilation: Architectural Engineers Improve the
Efficiency of Balanced Ventilation

Energy-recovery ventilation consists on exchanging energy between the supply and exhaust air, so that overall HVAC costs are minimized. These systems can be classified into two main types:

  • Heat-Recovery Ventilation (HRV)systems only exchange heat between the supply and exhaust airflows.
  • Enthalpy-Recovery Ventilation (ERV)systems exchange both heat and moisture.

Summer Operation

In the summer, outdoor air typically requires cooling and dehumidification. However, when air is exhausted, it is still cooler and drier than the supply air; therefore, a part of the energy used for cooling and dehumidification is lost.

  • The use of a heat exchanger (HRV) can improve energy efficiency: the exhaust air is used to precool the supply air without mixing both airstreams.
  • If an ERV system is used, moisture is also transferred from the supply air to the exhaust air, further improving air-conditioning efficiency because there is less moisture to remove.

Winter Operation

During the winter, HVAC needs are reversed because outdoor air typically requires heating and humidification. The operating principle of HRV and ERV is the same, but the direction in which heat and humidity are transferred is inverted.

  • The exhaust air is warmer, and the heat exchanger captures a part of that thermal energy to preheat the supply air.
  • If ERV is used, moisture is also retrieved from the exhaust air and provided to the supply air.

General Recommendations for HRV and ERV

It is important to note that HRV and ERV systems are significantly more complex than the ventilation systems presented before. They can only be installed and serviced by qualified personnel, which increases their cost of ownership. Compared with a basic balanced ventilation system, HRV and ERV systems have a higher running cost, but overall HVAC expenses are reduced.

HRV and ERV systems increase in effectiveness where temperature  and moisture extremes are reached during the summer or winter, or when heating fuel costs are high. Their benefits are diminished under moderate weather conditions, where the added running cost may be higher than the savings achieved – balanced ventilation is a better alternative in these cases.

Spot Ventilation: A Complement for Whole-House Ventilation

Spot ventilation consists on using exhaust fans to extract pollutants and humidity at the room where they are released, preventing them from being spread throughout other indoor spaces. In residential settings, spot ventilation is most commonly used in bathrooms and kitchens to meet the minimum exhaust air levels established in both the area mechanical codes and ASHRAE standards:

  • Bathrooms require 50 cfm of intermittent ventilation or 20 cfm of continuous ventilation.
  • Kitchens require 100 cfm or intermittent ventilation or 25 cfm of continuous ventilation.

Spot ventilation can be a great complement for supply ventilation systems, removing pollutants from key areas. This combination provides many of the benefits of a balanced ventilation system without having to install a full set of exhaust fans and ducts. According to experienced architectural engineers, the only disadvantage of this combination is that HRV and ERV systems are unfeasible, since there is no point where heat or moisture can be exchanged between airflows.

Top searches related to MEP Engineering in Marshall Square Chicago, IL.

Mechanical Engineering Jobs

(MEP) Engineering Service in Marshall Square Chicago

How Can Our Marshall Square Chicago MEP Engineers Help You! Successful property owners throughout West Hempstead, NY have come to rely on NY Engineers for a wide range of engineering services ranging from Fire Protection Engineering to Building Commissioning. For this reason property owners in Marshall Square Chicago will tell you that if you're searching for a excellent MEP Engineering firm in Marshall Square Chicago, Illinois you need to consider NY-Engineers.Com. A [...]

2018-08-29T13:42:03+00:00