MEP Engineering Services in McKinley Park Chicago, IL.

Construction Engineering Pdf

Developers throughout Freeport, New York have come to rely on NY-Engineers.Com for a wide range of engineering services ranging from MEP Engineering to Building Commissioning. For this reason developers in McKinley Park Chicago will tell you that if you are looking for a excellent MEP Engineering firm in McKinley Park Chicago, Illinois you need to consider New York Engineers.

Odds are, you may have walked into any particular sort of building and witnessed the outcomes of MEP Engineering. Simply put, MEP concentrates in the mechanical, electrical and plumbing areas of engineering. In essence, the name already gives a clue to the most typical and spot-on theory of what exactly is MEP. Our article may go into some details of what is MEP Engineering.

So far as the mechanical aspect is involved, for residential and commercial engineering, this deals with anything which moves. In addition its involves the use of complex and simple machines and also other mechanical mechanisms to perform certain tasks. Some everyday mechanical engineering jobs which can be noticed on a day to day bacis are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems which deal with boosting the energy productivity.

The electrical aspect of construction is centered on the functions, components, electrical safety, and more importantly, the wiring of any building. Engineers in this particular unit try very hard to make certain that the layout of the building are created to deliver sufficient electricity to every component in a safe manner where each of the electrical codes are followed. Some familiar electrical engineering tasks are available in the lighting design, modifying the voltage and allocating the power to every component within the building that needs a supply.

With regards to plumbing, there is a variety of plumbing factors that constitute the final form of any structure. Plumbing engineering goes deeper than just toilets, faucets, and sinks, and houses many behind the scene devices. These being the sewage and drainage lines plus the buildings domestic water supply and just how it flows.

As we conclude this article we have just considered what is MEP Engineering. MEP Engineering is managed in the construction industry. And, aids in completing the simply ignored technical elements of any building.

Hiring an MEP Engineering Firm in McKinley Park Chicago is Important for Large Construction Projects

Employing an MEP engineering firm in Wrightwood Neighbors Chicago, Illinois, could have everything to do with the success of your construction project. These specialists can help offset the fee for making this kind of hiring decision in relation to energy saving alone. If you are speaking about huge commercial structures, energy saving is an important topic of discussion. It’s time to determine another great reasons for employing MEP engineers in Wicker Park Chicago, Illinois.

Engineers have a lot to do with the physical integrity of the building. As you may well envision, this means the unseen is very vital. Design not just deals in looks but the basis of a building including its workings. Which is just another solid good reason that using an MEP engineering company will probably be good for any project.

Take into consideration every one of the pipes and plumbing. Think about the air conditioning systems and how important it is to get each one of its components inside the right places. Energy conservation was mentioned, but energy efficiency is an additional significant term to speak of. Energy efficiency is about your HVAC system, and it plays an important part in energy saving as a whole.

Think of your building’s shell. Consider installing security alarms as well as the safety and security measures set up through the structure. With everything else described up to now, it’s reliable advice that a great many facets of building construction might be either disregarded or minimized without MEP professionals at work.

Now with all you have read you will look for the best MEP engineering firm in the market, right? It’s very obvious the best engineers have to be involved in the massive construction of commercial buildings. Customised will be the right term to work with to explain the way these experts will alter a construction project to meet the requirements of your respective operations. There’s only so much you can save this page if you would like additional details on the MEP Engineering services in McKinley Park Chicago, Illinois by NY-Engineers.Com you should take a look at our blog.

Latest Building Commissioning Related Blog

Understanding Value Engineering in Upgrading LED Lighting Systems: Lamp Replacements, Retrofits and Fixture Replacements

Fire Protection Engineering UMD

LED lighting upgrades can be classified into three broad types based on how much the existing installation is modified: lamp replacements, retrofits and fixture replacements. You can normally achieve higher performance by upgrading more lighting system components, but the project cost is also increased. However, governments and utility companies may introduce rebate programs for energy-efficient lighting, and an expensive project can end up being high value engineering after a good rebate.

Like with any energy efficiency measure, a technical and financial analysis of the project is highly recommended before proceeding. This way, you can prioritize the specific upgrades that yield the highest return on investment. Although many factors determine project performance, the following tend to be the most relevant:

  • Upgrading lighting systems with long operating schedules first is recommended. Keep in mind that energy savings are the product of power saved and hours of use. The most efficient LED bulb in the market will not save much energy if the fixture where you install it is rarely used.
  • Lighting upgrades inside air-conditioned and refrigerated spaces provide two types of savings: a direct reduction in lighting power, and also a reduction of the amount of heat handled by cooling equipment.
  • The project achieves better results when the technology gap between the proposed and the existing lighting system is broader. For example, upgrading from incandescent to LED lighting yields more savings that upgrading from fluorescent, even if the final project consumes the same power in both cases.

This article will provide a brief overview of the main types of lighting upgrades, along with general recommendations for each case.

Value Engineering: Lamp Replacements

The simplest type of lighting upgrade is replacing existing bulbs with equivalent versions having better performance. This type of lighting upgrade can be performed quickly and for a relatively low cost, making it a value engineering option for companies who want to minimize disruption or who have a limited budget for energy efficiency projects.

Replacement lamps must also be selected with suitable lighting properties, depending on each application. They should deliver sufficient illuminance (lumens per square meter) while having the right color temperature (CCT) and the highest possible color rendering index (CRI) that meets the project budget.

  • Low CCT values (warm colors) work better when you want to create a relaxing environment, while high CCT values (cool colors) are recommended when visibility and awareness are important – in sports venues and manufacturing applications, for example.
  • On the other hand, the CRI is not specific for each application; a higher color rendition is always better but generally costs more.

Lighting designers use software such as DIALux to simulate the specified luminaires and fixtures, ensuring they deliver adequate lighting for their intended application.

If you are looking for replacement lamps, make sure you purchase products with the blue ENERGY STAR logo, which ensures high performance and intensive laboratory testing. In commercial and industrial applications you may find the DLC label instead (Design Lights Consortium). Both programs have very strict labeling requirements, so their respective logos indicate high quality and performance. They are mutually exclusive for most product categories, so don’t look for replacement lamps with both labels.

Retrofits

A retrofit is one step above a lamp replacement in complexity: existing lighting fixtures are reused, but with significant changes to their internal configuration.

  • An example of a retrofit would be taking a strip fixture with two 8-foot T12 fluorescent tubes and modifying it to use two parallel sets of 4-foot LED tubes.
  • This process involves bypassing or removing the ballast, changing the lamp bases, and adding additional bases halfway through the fixture body.
  • If the LED tubes specified use an external driver, it must be mounted inside the fixture as well. Drivers are similar to ballasts,but exclusive for LED and with aadditional lightingcontrol

Some retrofits stick to a similar topology as the lamps replaced, like the example above where 8-foot fluorescent tubes are replaced with 4-foot LED tubes. However, some lighting providers change the configuration completely; for example, there are rectangular retrofit kits with light engines that do not resemble tubes at all, intended for existing 2×4 or 2×2 fixtures. Retrofits kits are also commonly used with decorative fixtures, to preserve the fixture body while improving lighting performance.

Basically, a retrofit is intermediate between a lamp replacement and a fixture replacement. The fixture is partially modified and the light source is changed completely, but the fixture body is preserved. Many internal components are replaced or rewired, but not necessarily all of them.

Fixture Replacements

With this type of lighting upgrade the existing fixtures are removed completely, including the housing. A complete fixture replacement is the most expensive lighting upgrade, but it also tends to deliver the highest energy savings: integral LED fixtures are designed with an internal geometry that maximizes lighting delivered to working planes. On the other hand, with relamps and retrofits you are subject to the optical performance of the existing fixture.

Rebate programs tend to offer higher incentives for full fixture replacements, compared with relamps and retrofits.

Conclusion

There are many options available if you plan to upgrade the lighting system in your building. In general, LED lighting is a cost-effective investment due to its superior energy efficiency and long service life, but LED products are characterized by diversity and too many options can cause confusion. Get a professional lighting assessment to find the most promising lighting upgrades.

The incentive per fixture may not seem much, but consider that a large building can have thousands of fixtures. You can start saving electricity and money earlier by acting fast and pursuing the highest value engineering for your desired outcome.

Common searches related to Mechanical Engineering in McKinley Park Chicago, IL.

Best MEP Engineering Firms

(MEP) Engineering Service in McKinley Park Chicago

How Can Our McKinley Park Chicago MEP Engineers Help You! A large group of developers throughout Utica, New York have come to rely on NY-Engineers.Com for a wide range of engineering services ranging from MEP Engineering to Engineering Reports. For this reason developers in McKinley Park Chicago will tell you that if you are seeking a excellent MEP Engineering firm in McKinley Park Chicago, IL you need to consider NY Engineers. A [...]

2018-09-03T18:29:12+00:00