MEP Service in Niles, IL.

Contact Us

In search of a top rated MEP Firms in Chicago? Your best bet is to call is NY-Engineers.Com. Not only for MEP Chicago but also Value Engineering and Sprinkler System Engineering throughout Niles. Call (+1) 312 767-6877

Contact Us
Value Engineering Process Steps

Developers throughout Baldwin, New York have come to rely on New York Engineers for a wide range of engineering services ranging from Sprinkler Engineering to Engineering Reports. That is why property owners in Niles will tell you that if you’re looking for a excellent MEP Engineering firm in Niles, IL you need to consider NY Engineers.

It is very possible, you have walked into any specific kind of building and observed the outcomes of MEP Engineering. To put it simply, MEP focuses in the mechanical, electrical and plumbing aspects of engineering. Essentially, the name already gives rise to the most prevalent and spot-on guess of precisely what is MEP. This article may go into some details of what is MEP Engineering.

As far as the mechanical part is concerned, for commercial and residential engineering, this deals with anything which moves. Moreover its entails the application of complex and uncomplicated machines along with other mechanical mechanisms to carry out certain tasks. Some common mechanical engineering jobs which is often noticed everyday are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems that deal with increasing the energy efficiency.

The electrical part of construction is centered on the electrical safety, functions, components, and more importantly, the wiring associated with a building. Engineers within this branch go to great lengths to ensure that the schematics of a building are created to deliver ample electricity to every individual component in a safe manner ensuring that each of the electrical codes are followed. Some common electrical engineering functions can be obtained from the lighting design, modifying the voltage and allocating the energy to every single component inside the structure which needs a supply.

plumbing, there is certainly a variety of plumbing factors which constitute the final style of any structure. Plumbing engineering goes deeper than just sinks, faucets, and toilets, and houses several behind the scene appliances. These being the drainage line and sewage plus the buildings local water supply and how it flows.

As we conclude this article we certainly have just looked at what is MEP Engineering. MEP Engineering is managed throughout the construction industry. And, helps with completing the easily unnoticed technical facets of any building.

Hiring an MEP Engineering Firm in Niles is Essential for Major Construction Projects

Hiring an MEP firm in Irving Woods Chicago, Illinois, could have everything to do with the prosperity of your construction project. These specialists will help offset the expense of making this sort of hiring decision when it comes to energy management alone. If you are discussing big commercial buildings, energy saving is a vital topic of discussion. It’s time to find out various other great factors behind using MEP engineering company in Norwood Park East Chicago, IL.

Engineers have a lot to do with the structural integrity of a building. If you can well envision, it means the hidden is extreamly essential. Design not only deals in looks but the groundwork of a building including its mechanism. That may be yet another solid good reason that employing an MEP engineering company will probably be useful to your project.

Think about each of the pipes and plumbing. Consider the air conditioning systems and the importance of getting each one of its components inside the exact places. Energy maintenance was mentioned, however energy competence is another important term to speak of. Energy efficiency is about your HVAC system, and it plays a huge part in energy conservation as a whole.

Think of your building’s foundation. Consider installing home security systems as well as the security and safety measures set up through the entire structure. With everything else mentioned so far, it’s safe to say that a great many aspects of building construction might be either overlooked or minimized short of MEP pros at the job.

Now with all you have read you will be looking for the very best MEP engineering firm in the industry, right? It’s very clear that this best engineers must be active in the large scale construction of commercial buildings. Personalized may be the proper term to use to illustrate how these experts will customize a construction project to meet the requirements of your own operations. Even with all of this information you would like additional details on the MEP Engineering services in Niles, Illinois by NY Engineers we invite you to visit at our Niles MEP Engineering blog.

Latest Electrical Engineering Related Article

MEP Engineering Tips: 7 Ways to Minimize Mechanical Space

How To Become An HVAC Engineer

In any MEP engineering project, the Mechanical equipment carries out a fundamental role in residential, commercial, and industrial locations, performing functions such as:

  • Space cooling and heating
  • Supplying chilled or hot water
  • Refrigeration
  • Ventilation
  • Indoor humidity control

These types of equipment and their associated ductwork and piping are notorious for their high space requirements, but there are several ways to make mechanical installations more compact.

1)      Installing Boilers as Close to the Roof as Possible

Boilers that operate with the combustion of fuels such as oil, propane, natural gas, biomass, or biodiesel require a chimney to exhaust their flue gases. Since the chimney must cross the entire distance from the boiler to the rooftop, its space requirements are increased as the boiler is located farther from the uppermost level – there are more floors to go through.

Installing a boiler at the highest possible location in a building shortens the chimney, which offers three significant advantages:

  • The space that the chimney would have used on each floor is freed up for other purposes.
  • The installation becomes safer, because the risk of flue gases being released indoors is minimized.
  • The cost of the chimney is reduced.

An alternative to installing boilers on the attic or the uppermost floor of a building is to simply use a heating technology that does not require a chimney, such as an electric resistance heater or a heat pump. A solar water heater is also a viable option: it is located on the rooftop, saving indoor space, and it runs with sunlight, a free energy input.

2)      Installing Air Conditioning Units on Ceilings

The largest individual component of an air conditioning system is typically the condenser, which is normally located outdoors. When installed on the external walls of a home or building, condensers occupy plenty of space and may even represent an obstacle for outdoor circulation if located on the first floor.

Condensers also release a lot of heat, and the circulation of warm air may be restricted when outdoor spaces are reduced due to proximity with another building or a wall. This has two negative consequences that MEP engineering professionals must consider: warm air can make outdoor locations uncomfortable, and it reduces the operating efficiency of condensers. On the other hand, if a condenser is located on a rooftop, warm air can circulate more freely, and noise becomes less of an issue.

In large commercial or industrial facilities, the equipment used by air conditioning and cooling systems is much larger, but the same logic applies – installing these units on rooftops saves considerable outdoor space. However, this is only feasible if the structure is strong enough to support the weight. Examples of equipment that may be found outdoors in a typical commercial or industrial MEP engineering project settings include:

  • Packaged rooftop air conditioning units
  • Air-cooled chillers
  • Cooling towers for industrial processes or for water-cooled chiller plants

3)      Using the Same System for Cooling and Heating

A heat pump operates with the refrigeration cycle, the same physical principle on which air conditioners are based, with the difference that it operates in reverse – it extracts heat from the cooler outdoor environment and uses it for space or water heating. In addition, some heat pumps are reversible, which allows them to consolidate heating and cooling into a single piece of equipment.

Upgrading to a heat pump can also result in energy efficiency improvements. There are two key pieces of information to look for when comparing heat pump models:

  • The Seasonal Energy Efficiency Ratio (SEER) is the ratio of cooling output to energy input during the cooling season.
  • The Heating Seasonal Performance Factor (HSPF) is basically the same concept, but for when the heat pump is operating in heating mode.

The SEER and HSPF are ratios that relate BTUs (British Thermal Units) and watt-hours, and a higher value translates into reduced energy consumption: it means the unit needs less energy to meet a specific cooling or heating load. For example, an air conditioner with a SEER of 20 will only draw half the power of a SEER 10 unit, assuming both have the same cooling output.

Alternatively, unit efficiency may be reported as a Coefficient of Performance, which is also a ratio of cooling or heating output and power input, but using watts for all quantities. Heat pumps typically have a COP of 2.5 or more, which means they yield significant savings when replacing resistance heaters, whose COP is 1.

In MEP engineering, an ideal scenario for upgrading to a heat pump would be if a household uses a resistance heater and an old air conditioning unit. In this case, a heat pump would consolidate two devices into one, while improving energy efficiency in both modes of operation.

For industrial applications, using an absorption chiller is a viable option for consolidating heating and cooling systems. This type of chiller can use waste heat from a steam plant or an industrial process, and provide cold water for space and process cooling. It is important to note, however, that absorption chillers are viable only when there is sufficient waste heat; otherwise, a normal compression-based chiller is a better choice.

4)      Installing Mechanical Equipment in Normally Unused Spaces

Another viable strategy to minimize the useful indoor space on your next MEP engineering project that is typically taken up by mechanical equipment is to install these units in a location that is not normally used. One example of such locations is:

  • Roof Bulkheads – This is one type of structure that is found on many buildings and is rarely used. Their main purpose is providing access to the roof, and they tend to be used more during construction and maintenance than during actual building operation.

5)      Using Mini-Split Systems Instead of Packaged Rooftop Units for Small Buildings

Packaged rooftop units allow multiple condensers to be consolidated as a single unit, but they require considerable space for ductwork. In small residential and commercial locations, mini-split systems are often the superior choice, offering a simpler installation and superior energy efficiency. Packaged rooftop units normally go up to SEER 15, while mini-split systems are available with efficiency ratings of SEER 25 or above.

Mini-split systems are a practical choice in commercial locations that are split into several zones with independent schedules, such as open-air shopping malls. As locations become larger, rooftop packaged units emerge as the preferred choice – too many compressors and evaporators would be required to offer air conditioning with mini-split units.

6)      Vertically Aligning Equipment on Several Floors

Multi-story buildings normally have components that are repeated floor by floor, and mechanical equipment is no exception to this. For example, air conditioning systems in tall buildings often use a central chiller plant to cool water, which is then supplied to air handling units (AHU) that cool the air in each floor.

If AHUs and similar units are aligned vertically floor by floor, it is possible to distribute cold water to all of them with a single pipe running vertically across the building. Since ductwork is installed above the false ceiling, most mechanical equipment will be located out of sight.

The associated electrical installations providing power to mechanical equipment also become more compact when similar units are aligned vertically or horizontally. Multiple circuits can be installed within a single conduit run, and it is also possible to use a bus duct for equipment drawing high current.

7)      Hiring Qualified MEP Engineering Professionals for the Design Stage

A well-organized mechanical installation takes up less space, and making sure the layout is as simple as possible is a process that starts from the project design phase. If mechanical, electrical, and plumbing installations (MEP) are designed together, equipment and associated components can be specified and located with the following goals in mind:

  • Minimizing the space and materials requirements.
  • Avoiding clutter caused by components from different buildings systems.

There are now software packages that allow 3D MEP models to be created and visualized before starting the construction process — including Revit. These models are of great assistance when planning how mechanical installations will be laid out on your next MEP engineering project, and are also very useful for contractors during materials takeoff and construction.

Conclusion

Optimizing the space used by mechanical equipment in your MEP engineering projects offers several advantages beyond comfort. It may be possible to reduce the cost of installations, and in many cases it also increases energy efficiency. The best way to ensure a mechanical installation offers top performance and an optimal layout is to hire qualified designers and contractors for the project.

Top searches related to Engineering Reports in Niles, IL.

Architectural Engineering Degree

(MEP) Engineering Service in Niles

MEP Company Niles! When you re looking for a dependable MEP Chicago in Firm? The one to go to is is New York Engineers. Not only for MEP Firms in Chicago but also Electrical Engineering and Sprinkler System Engineering in or near Niles. Call (312) 767-6877 Several developers throughout Schenectady, NY have come to depend on NY-Engineers.Com for a wide range of engineering services ranging from Plumbing Engineering to Building Commissioning. [...]

2018-09-23T12:48:08+00:00