MEP Service in North Center Chicago, Illinois.

Contact Us

In search of the top MEP Engineering in Chicago? Your best bet is to call is NY Engineers. Not only for MEP Chicago but also Architectural Engineering and Protection Engineering in or near North Center Chicago. Contact us at (+1) (312) 767-6877

Contact Us
HVAC Engineers Near Me

Developers throughout Brentwood, NY have come to rely on NY Engineers for a wide range of engineering services ranging from Fire Protection Engineering to Energy Modeling. This is why construction companies in North Center Chicago will tell you that if you are searching for a excellent MEP Engineering firm in North Center Chicago, Illinois you need to consider New York Engineers.

Chances are, you have walked into any particular sort of building and saw the outcomes of MEP Engineering. To put it simply, MEP concentrates on the mechanical, electrical and plumbing elements of engineering. Basically, the name already gives rise to the most typical and precise theory of precisely what is MEP. This article will go into some infor of what is MEP Engineering.

So far as the mechanical part is concerned, both for commercial and residential engineering, this works with anything which moves. In addition its entails using complex and easy machines as well as other mechanical mechanisms to carry out certain tasks. Some everyday mechanical engineering jobs that may be noticed regularly are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems which deal with enhancing the energy productivity.

The electrical part of construction is focused on the functions, components, electrical safety, and even more importantly, the wiring of the building. Engineers within this branch try very hard to make sure that the layout of a building are made to bring sufficient power to every individual component in a safe manner ensuring that all of the electrical codes are followed. Some familiar electrical engineering tasks can be found in the lighting design, regulating the voltage and allocating the power to each component within the structure which needs a supply.

With regards to plumbing, there may be a wide array of plumbing components that make up the final design of any building. Plumbing engineering goes deeper than just sinks, faucets, and toilets, and holds many behind the scene equipments. These being the sewage and drainage lines as well as the buildings domestic water supply and how it flows.

As we conclude this article we have just looked at what is MEP Engineering. MEP Engineering is managed inside the construction industry. And, aids in completing the simply unnoticed technical areas of any building.

Hiring an MEP Engineering Firm in North Center Chicago is Necessary for Major Construction Projects

Hiring an MEP firm in Stateway Gardens Chicago, Illinois, can have everything to do with the prosperity of your construction project. These professionals will help offset the expense of making this kind of hiring decision in relation to energy upkeep alone. When you find yourself speaking about large commercial structures, energy management is really a topic of discussion. It’s time to learn a few other great reasons for employing MEP firm in Lake View Chicago, Illinois.

Engineers have everything to do with the physical reliability of your building. If you may well imagine, that means the hidden is very important. Design not merely deals in aesthetics but the underpinning of a building also its components. That may be the next solid good reason that hiring an MEP engineering firm will likely be good for your project.

Consider all of the pipes and plumbing. Think about the air conditioning systems and how important it is to get all of its mechanics in the right places. Energy maintenance was mentioned, but energy competence is yet another vital term to mention. Energy efficiency has everything to do with your HVAC system, plus it plays a huge role in energy conservation in general.

Think of your building’s base. Consider installing security systems and also the safety and security measures put in place along the entire structure. With everything discussed thus far, it’s reliable advice that numerous areas of building construction might be either overlooked or underestimated without MEP professionals at the job.

Now with all you have read you will look to find the best MEP engineering company in the industry, right? It is pretty clear that the best engineers really need to be in the massive building of commercial buildings. Personalized is the right term to make use of to illustrate how these pros will alter a construction job to meet the needs of the operations. There is a great possibility you would like more details about the MEP Engineering services in North Center Chicago, Illinois by New York Engineers you should take a look at our North Center Chicago CAD to Revit Modeling blog.

Latest Building Commissioning Related Blog Post

Heating and Cooling Upgrades: Where to Start? Architectural Engineers Have This Advice

Value Engineering Ppt

Space heating represents the highest energy use in many buildings. In addition, domestic hot water and space cooling systems use less energy than space heating, but they are also among the top five building systems that use the most energy. According to architectural engineers, a building can reduce its energy consumption dramatically by replacing its existing heating and cooling systems with modern and high-efficiency equipment.

However, before proceeding with a large-scale building upgrade it is necessary to define a starting point. Building upgrades are investments after all, where the property owner spends capital with the goal of achieving a permanent reduction in building ownership cost. In other words, building system upgrades only make sense from the financial standpoint if the long-term benefit outweighs the associated upfront expenses.

Is There an Upcoming Major Renovation?

Heating and cooling upgrades provide long-term benefits but can be disrupting for building operation. If a major renovation is planned in the short term, it represents an excellent chance to also improve HVAC performance.

A major renovation also provides an excellent chance to improve the building envelope, architectural engineers advise. Poor insulation and air leaks can be detected and fixed, reducing the required heating and cooling capacity after the renovation. This way, the new heating and cooling systems can be specified not only with a higher efficiency, but also with a lower capacity.

  • For example, if you replace a 100-ton air-cooled chiller consuming 1.2 kW/ton with a more efficient water-cooled unit that only uses 0.6 kW/ton, you achieve 50% energy savings.
  • However, if the new unit has a required capacity of only 80 tons thanks to building envelope improvements, energy savings are increased to 60%.

A building envelope improvement can be complemented with a lighting system upgrade. Solid-state LED lighting emits significantly less heat than incandescent, halogen or old fluorescent lighting. All this heat is subtracted from space cooling loads, providing additional energy savings beyond those achieved directly with the lighting upgrade.

Consider that a 60-watt incandescent bulb can generally be replaced with a 10-watt LED bulb, and a 4-lamp T12 fluorescent fixture (4x 34W) can generally be replaced with an integral LED fixture consuming 40-45W. The lighting heat reduction is not significant for a single fixture, but can save several tons of cooling capacity in a building with hundreds of inefficient fixtures.

Building Upgrades: Cost and Benefit

When upgrading a building it can be tempting to prioritize space heating systems, since they consume the most energy. However, it is also important to consider the energy source used by each appliance.

For a given amount of energy delivered, electricity is far more expensive than gas in major cities. Natural gas from Con Edison has a price of around 1.05 USD per therm for residential users, which translates to approximately 3.6 cents per kWh of heat, before considering appliance efficiency. On the other hand, electricity prices typically exceed 20 cents per kWh. Even if most combustion appliances are less efficient than electric appliances, the price of electricity is too high compared with that of gas. This effect is evident in electric resistance heaters, which are around four times more expensive to operate than gas heaters.

Property owners can achieve the best results by getting a professional energy audit before deciding which building upgrades to carry out. With an energy audit, property owners can get a detailed breakdown of energy efficiency measures, along with the expected cost of each. More importantly, an energy audit helps determine the return on investment for each energy efficiency measure – how many dollars will it return over its service life for each dollar spent upfront? Given the price gap between electricity and gas, upgrades that target electric system generally offer a shorter payback period and a higher ROI.

Before proceeding with any building upgrade, checking the Con Edison incentive program is highly advised. Many energy efficiency measures are eligible for attractive cash rebates, which further improves their financial performance. Consider that some rebate programs only apply during certain times of the year or have limited funding, so building upgrades should be planned accordingly.

Importance of Building Type to Architectural Engineers

Not all buildings consume energy the same way. For example, mechanical ventilation typically represents around 13% of energy use in office buildings, but only 1% in multifamily residential settings. This is a consequence of the requirements established by construction codes for each property type – natural ventilation design is mandatory in residential constructions, but designers can choose between natural and mechanical ventilation for office buildings. Domestic hot water systems experience the opposite effect as ventilation systems, representing only 2% of energy use in office buildings but 19% in multi-family residential buildings.

Differences like this are present for many building systems. For example, office occupancy is normally higher than residential occupancy during the day, which extends lighting and space cooling schedules for office buildings, and the corresponding energy expense. However, this does not mean lighting and cooling upgrades should be discarded in the residential sector: these systems represent a reduced percentage of energy consumption but are typically older than those found in office buildings, which can result in an attractive financial return.

Final Recommendations

When deciding which cooling and heating upgrades to prioritize, it is very important to select an adequate time frame for the project, and getting an energy audit to determine the cost and benefit of each measure. Ideally, deep retrofits should be scheduled along with major renovations to minimize disruption and cost. It is also important to find synergy between upgrades, for example when both lighting and space cooling are upgraded. Of course, the financial return is also a very important consideration: as a property owner you will want to prioritize measures that maximize the return on each dollar invested.

In general, energy efficiency measures that target electric systems will have a better financial performance than those targeting gas-fired systems. Nevertheless, there are exceptions to this; an energy audit of the building is the best way to tell, agree experienced architectural engineers.

Popular searches related to Utility Filings North Center Chicago, Illinois.

Architectural Engineering Degree

(MEP) Engineering Service in North Center Chicago

MEP North Center Chicago! If you're looking for a dependable MEP Firms in Chicago? The top choice is is NY-Engineers.Com. Not only for MEP Firms in Chicago but also Mechanical Engineering and Sprinkler Engineering in North Center Chicago. Contact us at (+1) 312 767-6877 Several general contractors throughout Auburn, New York have come to rely on New York Engineers for a wide range of engineering services ranging from Sprinkler Engineering to [...]

2018-09-10T18:32:34+00:00