MEP Engineering Services in Park Manor Chicago, IL.

MEP Engineers

Real estate investors throughout Lake Ronkonkoma, NY have come to rely on NY Engineers for a wide range of engineering services ranging from Mechanical Engineering to CAD to Revit Modeling. For this reason developers in Park Manor Chicago will tell you that if you are looking for a top-rated MEP Engineering firm in Park Manor Chicago, IL you need to consider New York Engineers.

No doubt, you may have walked into any particular form of building and saw the results of MEP Engineering. In other words, MEP focuses in the mechanical, electrical and plumbing facets of engineering. Basically, the name already gives rise to the most prevalent and accurate notion of what exactly is MEP. This article will go into some information on what is MEP Engineering.

So far as the mechanical aspect is involved, for commercial and residential engineering, this works with anything that moves. Furthermore its involves the use of complex and easy machines and also other mechanical mechanisms to do certain tasks. Some ordinary mechanical engineering tasks that can be noticed on a day to day bacis are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems which handle boosting the energy efficiency.

The electrical part of construction is focused on the components, functions, electrical safety, and most importantly, the wiring associated with a building. Engineers with this branch try very hard to ensure the layout of a building are meant to deliver ample power to every component in a safe manner ensuring that every one of the electrical codes are met. Some familiar electrical engineering functions can be obtained from the lighting design, modifying the voltage and distributing the energy to each component of building that needs a supply.

In terms of plumbing, there exists a wide array of plumbing factors that constitute the final style of any structure. Plumbing engineering goes deeper than only sinks, faucets, and toilets, and holds many behind the scene equipments. These being the drainage line and sewage and also the buildings household water supply and the way it flows.

As we wrap up our article we have just checked out what is MEP Engineering. MEP Engineering is administered inside the construction industry. And, aids in completing the often overlooked technical aspects of any building.

Hiring an MEP Engineering Firm in Park Manor Chicago is Essential for Large Construction Projects

Employing an MEP engineering firm in New Chinatown Chicago, ILO, might have a whole lot to do with the prosperity of your construction project. These engineers will help offset the expense of making this sort of hiring decision with regards to energy upkeep alone. If you are talking about large commercial structures, energy upkeep is a vital topic of discussion. It’s time to discover various other great reasons for employing MEP engineers in Hermosa Chicago, Illinois.

Engineers have a lot to do with the structural reliability of a building. If you may well imagine, it means the unseen is extreamly important. Design not merely deals in aesthetics but the foundation of a building also its mechanism. That is certainly merely another solid reason why using an MEP engineering company will be useful to your project.

Think about all of the pipes and plumbing. Take into account the heating and cooling systems and the importance of getting each one of its components in the exact places. Energy saving was mentioned, and energy competence is another significant term to bring up. Energy efficiency has everything to do with your HVAC system, plus it plays a huge role in energy conservation overall.

Consider your building’s shell. Consider installing home security systems and the safety and security measures put in place through the entire structure. With everything else talked about to date, it’s safe to say that numerous areas of building construction could be either ignored or minimized short of MEP professionals on-the-job.

Now with all you have read you will look to find the best MEP engineering firm in the market, right? It’s pretty obvious the best engineers must be in the large scale building of commercial structures. Customised is the right term to make use of to illustrate the way these specilists will alter a construction job to meet the needs of your respective operations. Even with all of this information you would like more information on the MEP Engineering services in Park Manor Chicago, IL by NY-Engineers.Com you should check out at our blog.

Construction Administration Related Blog

How Mechanical Engineers Compare Operating Expenses of Different Water Heater Models

HVAC Engineering Companies

One of the key characteristics to consider when deciding between several water heater options is the operating cost; the heater with the lowest price tag is not necessarily the least expensive to own in the long term. Operating cost is determined in great part by equipment efficiency, but there are other equally important factors that mechanical engineers want you to consider:

  • Energy sources have different unit prices. In the case of heating systems, the input is generally electricity, natural gas, propane or fuel oil. There are also zero-cost energy sources, such as geothermal energy and sunlight.
  • Operating schedules may vary depending on the type of heater. Rated power is not the only factor that determines total energy consumption; the operating schedule must also be considered. For example, tankless water heaters have a high rated power but operate in short bursts, saving energy compared to a storage heater that draws less power but operates continuously, assuming the energy source is the same.

This article will provide a guide for calculating and comparing operating expenses with different types of heaters. After these values are calculated, they can be weighed against the upfront cost of each heating system to find the most cost-effective option.

As with any investment in equipment, considering the total ownership cost is very important when purchasing a heater: to calculate the real heating cost per BTU or kWh produced, it is necessary to factor in the initial investment and any maintenance or reparation expenses. For instance, saying that solar heating is free would not be completely true; although the energy input is free, there are equipment and installation costs, and in multistory buildings a small pump may be required for water to reach the rooftop.

Energy Factor: How Mechanical Engineers Calculate Heating Expenses

The energy factor (EF) is the ratio of heating output to energy input offered by a heating system. It considers how effectively the heater converts its energy input into an increase in water temperature, but also accounts for other aspects of heater operation:

  • Standby losses – These losses are found in storage heaters, and they represent the heat loss associated with keeping the water in the tank at the desired temperature. Although proper insulation mitigates standby losses, they are impossible to eliminate completely.
  • Cycling losses – These losses occur as water circulates through the heater’s internal piping, and through the storage tank if present.

Heaters running on fossil fuels have energy factors well below unity, electric tankless heaters operate close an EF of 1, and heat pumps have EF values higher than unity because their inverse refrigeration cycle allows them to draw heat from the surrounding environment.

Comparing Water Heaters: An Example

Assume you are presented with four water heaters for a household that consumes 80 million BTU per year, and want to calculate the operating costs associated with each alternative:

  • A gas-fired storage heater with an EF of 0.55
  • A tankless electric heater with an EF of 0.97
  • A tankless gas heater with an EF of 0.80
  • An electric air-source heat pump with an EF of 2.5

Since the example is for one city, assume the cost of natural gas is $1.20 per 100,000 BTU, and the electricity rate is $0.18 per kilowatt-hour.

  • For the gas heaters, the calculation procedure can be carried out directly because the heating output and energy input are both in BTU.
  • The tankless electric heater and heat pump run with electricity, so the heating output must be converted to kWh before proceeding.
  • Heating Output (kWh)=80,000,000 BTU x 1kWh/3412.14 BTU= 23,446 kWh

Other than this, the calculation procedure is the same for all four heaters. The yearly heating output is divided by the energy factor (EF) to calculate yearly energy consumption, and this value is then multiplied by the unit price of energy, per kWh or BTU. This formula is applied by mechanical engineers to all four water heaters, to determine which is the least expensive to operate.

Gas-fired storage heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.55×1.20 USD/100,000 BTU=1745 USD

Tankless electric heater operating cost:
Operating Cost (USD/yr)=23,446 kWh/.97X.18 USD/kWh=4351 USD

Tankless gas heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.8 X 1.20 USD/100,000 BTU=1200 USD

Electric air-source heat pump operating cost:
Operating Cost (USD/yr)=23,446 kWh/2.5 X .18 USD/kWh=1688 USD

Operating Cost Comparison

In this case, the tankless gas heater has the lowest operating cost. The heat pump and gas-fired storage heater follow, although the heat pump wins by a slight margin. The tankless electric heater is the most expensive to operate by far.

Total Cost of Owning and Operating Heaters

For a full evaluation, the upfront cost and service life must be considered as well. For this example, assume the following cost and rated life values:

HeaterInstalled CostService life
Heat Pump$180015
Tankless electric heater$150020
Tankless gas heater$200020
Gas-fired storage heater$120010

For simplicity, the analysis will be limited to upfront and operation costs. The yearly ownership cost of each heater option would be:

  • Heat Pump Cost = $1688/year + ($1800/15 years) = $1808/year
  • Tankless Electric Heater = $4351/year + ($1500/20 years) = $4426/year
  • Tankless Gas Heater = $1200/year + ($2000/20 years) = $1300/year
  • Gas-Fired Storage Heater = $1745/year + ($1200/10 years) = $1865/year

The tankless gas heater is still the winner in this case, despite its higher upfront cost. The heat pump and gas-fired storage heater have a similar cost of ownership, and the tankless electric heater is very expensive to operate due to the high electricity rates of some cities. However, keep in mind this is just an example, and different results may be obtained for different locations.

Concluding Remarks

To determine which type of heater is the best match for your property, getting a professional assessment from one or more mechanical engineers is highly recommended. For example, if you don’t have a chimney, the installation cost of any gas heater will increase significantly. Remember that electricity and gas prices also vary by location, and what is true in one location may not always apply in another city or state.

Popular searches related to Construction Administration Park Manor Chicago, IL.

MEP Mechanical

(MEP) Engineering Service in Park Manor Chicago

How Can Our Park Manor Chicago MEP Engineers Help You! Successful construction companies throughout Mount Vernon, New York have come to rely on New York Engineers for a wide range of engineering services ranging from MEP Engineering to Energy Modeling. This is why developers in Park Manor Chicago will tell you that if you're searching for a dependable MEP Engineering firm in Park Manor Chicago, Illinois you should consider New York Engineers. [...]

2018-09-03T17:43:37+00:00