MEP Service in Prairie Shores Chicago, IL.

Contact Us

Searching for a top MEP Firms in Chicago? Your best bet is to call is New York Engineers. Not only for MEP Engineering in Chicago but also HVAC Engineering and Sprinkler Design Engineering throughout Prairie Shores Chicago. Call (312) 767.6877

Contact Us
MEP Engineering Books

Developers throughout Medford, New York have come to rely on NY Engineers for a wide range of engineering services ranging from Sprinkler Engineering to Engineering Reports. This is why building owners in Prairie Shores Chicago will tell you that if you’re looking for a top-rated MEP Engineering firm in Prairie Shores Chicago, Illinois you should consider NY-Engineers.Com.

Chances are, you may have walked into any specific form of building and observed the outcomes of MEP Engineering. To put it simply, MEP focuses in the mechanical, electrical and plumbing areas of engineering. Basically, MEP already gives rise to the most common and spot-on notion of precisely what is MEP. Our article may go into some information on what is MEP Engineering.

As far as the mechanical aspect is involved, for both residential and commercial engineering, this works with anything that moves. Additionally its involves the application of complex and easy machines along with other mechanical mechanisms to do certain tasks. Some everyday mechanical engineering jobs which may be noticed everyday are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems that deal with boosting the energy productivity.

The electrical element of construction is focused on the components, functions, electrical safety, and even more importantly, the wiring associated with a building. Engineers within this section go to great lengths to ensure that the layout of any building are created to provide enough electricity to each individual component in a safe manner where all of the electrical codes are followed. Some common electrical engineering jobs are available in the lighting design, regulating the voltage and distributing the electricity to each component in the structure that requires a supply.

With regards to plumbing, there may be a wide array of plumbing factors which constitute the final style of any building. Plumbing engineering goes deeper than just toilets, faucets, and sinks, and holds many behind the scene appliances. These being the drainage line and sewage and also the buildings household water supply and how it flows.

As we wrap up our article we now have just reviewed what is MEP Engineering. MEP Engineering is administered throughout the construction industry. And, aids in completing the simply overlooked technical aspects of any building.

Hiring an MEP Engineering Firm in Prairie Shores Chicago is Important for Huge Construction Projects

Hiring an MEP engineering company in Near North Side Chicago, Illinois, might have a whole lot to do with the achievements of your construction project. These experts can help offset the price of making such a hiring decision in terms of energy conservation alone. While you are referring to large commercial buildings, energy management is an important topic of discussion. It’s time to find out various other great reasons behind using MEP engineering company in River West Chicago, IL.

Engineers have a great deal to do with the physical reliability of the building. If you may well envision, it means the hidden is very essential. Design not just deals in looks but the basis of a building also its components. Which is yet another solid good reason that hiring an MEP engineering company will be beneficial to any project.

Think of all of the pipes and plumbing. Take into account the cooling and heating systems and the importance of getting all its mechanics inside the precise places. Energy maintenance was mentioned, and energy competence is yet another important term to mention. Energy competence is related to your HVAC system, and it plays an important part in energy saving as a whole.

Think about your building’s base. Consider installing security systems and the safety and security measures put in place through the structure. With everything else described thus far, it’s reliable advice that many elements of building construction might be either overlooked or minimized without MEP engineers at work.

Now with all you have read you are going to look to find the best MEP engineering firm in the industry, right? It is pretty obvious that this best engineers really need to be active in the large building of commercial buildings. Tailor made is the proper term to make use of to explain the way these pros will alter a construction job to meet the requirements of your respective operations. There is a great possibility you would like more info about the MEP Engineering services in Prairie Shores Chicago, IL by NY-Engineers.Com you should visit at our blog.

New CAD to Revit Modeling Related Blog

How Mechanical Engineers Compare Operating Expenses of Different Water Heater Models

Electrical Engineers

One of the key characteristics to consider when deciding between several water heater options is the operating cost; the heater with the lowest price tag is not necessarily the least expensive to own in the long term. Operating cost is determined in great part by equipment efficiency, but there are other equally important factors that mechanical engineers want you to consider:

  • Energy sources have different unit prices. In the case of heating systems, the input is generally electricity, natural gas, propane or fuel oil. There are also zero-cost energy sources, such as geothermal energy and sunlight.
  • Operating schedules may vary depending on the type of heater. Rated power is not the only factor that determines total energy consumption; the operating schedule must also be considered. For example, tankless water heaters have a high rated power but operate in short bursts, saving energy compared to a storage heater that draws less power but operates continuously, assuming the energy source is the same.

This article will provide a guide for calculating and comparing operating expenses with different types of heaters. After these values are calculated, they can be weighed against the upfront cost of each heating system to find the most cost-effective option.

As with any investment in equipment, considering the total ownership cost is very important when purchasing a heater: to calculate the real heating cost per BTU or kWh produced, it is necessary to factor in the initial investment and any maintenance or reparation expenses. For instance, saying that solar heating is free would not be completely true; although the energy input is free, there are equipment and installation costs, and in multistory buildings a small pump may be required for water to reach the rooftop.

Energy Factor: How Mechanical Engineers Calculate Heating Expenses

The energy factor (EF) is the ratio of heating output to energy input offered by a heating system. It considers how effectively the heater converts its energy input into an increase in water temperature, but also accounts for other aspects of heater operation:

  • Standby losses – These losses are found in storage heaters, and they represent the heat loss associated with keeping the water in the tank at the desired temperature. Although proper insulation mitigates standby losses, they are impossible to eliminate completely.
  • Cycling losses – These losses occur as water circulates through the heater’s internal piping, and through the storage tank if present.

Heaters running on fossil fuels have energy factors well below unity, electric tankless heaters operate close an EF of 1, and heat pumps have EF values higher than unity because their inverse refrigeration cycle allows them to draw heat from the surrounding environment.

Comparing Water Heaters: An Example

Assume you are presented with four water heaters for a household that consumes 80 million BTU per year, and want to calculate the operating costs associated with each alternative:

  • A gas-fired storage heater with an EF of 0.55
  • A tankless electric heater with an EF of 0.97
  • A tankless gas heater with an EF of 0.80
  • An electric air-source heat pump with an EF of 2.5

Since the example is for one city, assume the cost of natural gas is $1.20 per 100,000 BTU, and the electricity rate is $0.18 per kilowatt-hour.

  • For the gas heaters, the calculation procedure can be carried out directly because the heating output and energy input are both in BTU.
  • The tankless electric heater and heat pump run with electricity, so the heating output must be converted to kWh before proceeding.
  • Heating Output (kWh)=80,000,000 BTU x 1kWh/3412.14 BTU= 23,446 kWh

Other than this, the calculation procedure is the same for all four heaters. The yearly heating output is divided by the energy factor (EF) to calculate yearly energy consumption, and this value is then multiplied by the unit price of energy, per kWh or BTU. This formula is applied by mechanical engineers to all four water heaters, to determine which is the least expensive to operate.

Gas-fired storage heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.55×1.20 USD/100,000 BTU=1745 USD

Tankless electric heater operating cost:
Operating Cost (USD/yr)=23,446 kWh/.97X.18 USD/kWh=4351 USD

Tankless gas heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.8 X 1.20 USD/100,000 BTU=1200 USD

Electric air-source heat pump operating cost:
Operating Cost (USD/yr)=23,446 kWh/2.5 X .18 USD/kWh=1688 USD

Operating Cost Comparison

In this case, the tankless gas heater has the lowest operating cost. The heat pump and gas-fired storage heater follow, although the heat pump wins by a slight margin. The tankless electric heater is the most expensive to operate by far.

Total Cost of Owning and Operating Heaters

For a full evaluation, the upfront cost and service life must be considered as well. For this example, assume the following cost and rated life values:

HeaterInstalled CostService life
Heat Pump$180015
Tankless electric heater$150020
Tankless gas heater$200020
Gas-fired storage heater$120010

For simplicity, the analysis will be limited to upfront and operation costs. The yearly ownership cost of each heater option would be:

  • Heat Pump Cost = $1688/year + ($1800/15 years) = $1808/year
  • Tankless Electric Heater = $4351/year + ($1500/20 years) = $4426/year
  • Tankless Gas Heater = $1200/year + ($2000/20 years) = $1300/year
  • Gas-Fired Storage Heater = $1745/year + ($1200/10 years) = $1865/year

The tankless gas heater is still the winner in this case, despite its higher upfront cost. The heat pump and gas-fired storage heater have a similar cost of ownership, and the tankless electric heater is very expensive to operate due to the high electricity rates of some cities. However, keep in mind this is just an example, and different results may be obtained for different locations.

Concluding Remarks

To determine which type of heater is the best match for your property, getting a professional assessment from one or more mechanical engineers is highly recommended. For example, if you don’t have a chimney, the installation cost of any gas heater will increase significantly. Remember that electricity and gas prices also vary by location, and what is true in one location may not always apply in another city or state.

searches related to Electrical Engineering in Prairie Shores Chicago, Illinois.

HVAC Mechanical Engineer

(MEP) Engineering Service in Prairie Shores Chicago

MEP Company Prairie Shores Chicago! When you re looking for a competent MEP Firms in Chicago? The top choice is is NY Engineers. Not only for MEP Firms in Chicago but also Construction Engineering and Sprinkler System Engineering near Prairie Shores Chicago. Call us at (+1) 312 767.6877 Many real estate investors throughout Garden City, New York have come to depend on New York Engineers for a wide range of engineering [...]

2018-09-13T03:11:40+00:00