MEP Service in Quincy, Illinois.

Contact Us

Searching for MEP Engineering in Chicago? The one to go to is NY Engineers. Not only for MEP Engineering in Chicago but also Architectural Engineering and Protection Engineering throughout Quincy. Contact us at (312) 767.6877

Contact Us
MEP Consulting Engineers

Developers throughout Brighton, NY have come to depend on New York Engineers for a wide range of engineering services ranging from Sprinkler Engineering to Engineering Reports. For this reason construction companies in Quincy will tell you that if you are seeking a top-rated MEP Engineering firm in Quincy, Illinois you should consider NY Engineers.

Chances are, you might have walked into any specific kind of building and observed the outcome of MEP Engineering. Simply put, MEP centers in the mechanical, electrical and plumbing aspects of engineering. In simple terms, MEP already gives rise to the most common and spot on assumption of precisely what is MEP. This article may go into some infor of what is MEP Engineering.

So far as the mechanical side is concerned, for both residential and commercial engineering, this deals with anything which moves. Additionally its entails the usage of complex and uncomplicated machines and also other mechanical mechanisms to perform certain tasks. Some common mechanical engineering jobs which is often noticed regularly are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems which cope with enhancing the energy productivity.

The electrical facet of construction is focused on the electrical safety, functions, components, and above all, the wiring of the building. Engineers with this branch go to great lengths to make certain that the layout of the building are meant to supply ample electricity to every component in a safe manner ensuring that all the electrical codes are met. Some common electrical engineering functions can be found in the lighting design, regulating the voltage and distributing the energy to each component within the building which takes a supply.

With regards to plumbing, there is certainly a wide array of plumbing components which constitute the final design of any building. Plumbing engineering goes deeper than only sinks, faucets, and toilets, and holds several behind the scene appliances. These being the sewage and drainage lines along with the buildings household water supply and just how it flows.

As we conclude this article we have just looked at what is MEP Engineering. MEP Engineering is managed in the construction industry. And, helps with completing the often ignored technical aspects of any building.

Hiring an MEP Engineering Firm in Quincy is Essential for Huge Construction Projects

Employing an MEP engineering firm in Chatham Chicago, Illinois, could have a whole lot to do with the success of your construction project. These professionals will help offset the price of making this sort of hiring decision in relation to energy saving alone. When you are talking about huge commercial structures, energy upkeep is a vital topic of discussion. It’s time to determine a few other great factors behind hiring MEP firm in West Town Chicago, IL.

Engineers have a great deal to do with the structural reliability of a building. As you can well envision, this means the hidden is extreamly vital. Design not only deals in looks but the base of a building including its workings. That is merely another solid good reason that hiring an MEP engineering company will likely be good for any project.

Think of all of the pipes and plumbing. Think about the heating and air conditioning systems and the importance of getting all of its mechanics in the exact places. Energy conservation was stated, but energy efficiency is yet another vital term to bring up. Energy efficiency is about your HVAC system, plus it plays an important part in energy maintenance as a whole.

Think of your building’s base. Consider setting up fire alarm systems along with the safety and security measures set up throughout the structure. With everything mentioned to date, it’s safe to say that numerous aspects of building construction can be either ignored or minimized without MEP engineers at the job.

Now with all you have read you will look to get the best MEP engineering company in the industry, right? It’s very clear that this best engineers really need to be in the large scale building of commercial buildings. Personalized may be the proper term to work with to illustrate the way in which these specilists will alter a construction project to meet the requirements of your respective operations. There is only so much you can save this page if you would like more information on the MEP Engineering services in Quincy, IL by NY Engineers we invite you to visit at our Quincy Construction Administration blog.

Building Commissioning Related Blog Article

MEP Engineering in Upgrading Space Cooling Systems for Multifamily Buildings

Fire Protection Engineering Jobs

Most space cooling systems are powered by electricity, but some of the larger buildings also use absorption chillers powered by natural gas or district steam. Only space heating, plug loads and lighting consume more energy than space cooling in NYC.

There is a significant opportunity for MEP engineering to improve cooling efficiency in the multifamily residential sector, where almost half of all buildings use inefficient air conditioning systems:

  • Window-type air conditioners
  • Through-the-wall air conditioners
  • Packaged terminal air conditioners (PTAC)

These three types of space cooling systems have the same disadvantage: they require openings in the building envelope, which increase heat gain during the summer and heat loss during the winter. As a result, these AC units are not only inefficient themselves, but they also increase the load on space heating systems.

Space cooling systems in office buildings are generally more efficient, since the most common technologies used are direct expansion (DX) units and electric chillers, both of which are much more efficient MEP engineering solutions than window-type, through-the-wall and PTAC units.

Upgrading Space Cooling Systems in Individual Dwellings

Deploying centralized space cooling systems in existing multifamily buildings can prove challenging, since the upgrade can be highly disruptive for tenants and the allocation of space cooling expenses also becomes more complex. The cost of running a central AC system cannot be split equally because usage varies by tenant, and space cooling electricity cannot be metered individually if the system distributes chilled water or cool air.

However, there are also individual space cooling systems that offer a much better efficiency than window-type, through-the-wall and PTAC units.  Two of the most promising options are mini-split air conditioners and heat pumps.

A mini-split air conditioner gets its name from how the system is configured. An internal evaporator unit cools indoor air and circulates it with a built-in fan, while an external condenser unit rejects heat. The two components are just connected with insulated refrigerant lines, which eliminate the large opening required in older system configurations.

Mini-split heat pumps are also available, offering reversible operation to deliver space cooling in the summer and space heating in the winter. A heat pump consolidates two pieces of equipment as one unit, making it an attractive upgrade for dwellings that use inefficient space heating systems such as electric resistance heaters.

The cooling efficiency of split-type air conditioners and heat pumps is normally indicated by the Seasonal Energy Efficiency Ratio (SEER), a ratio of cooling output in British Thermal Units to electricity input in watt-hours. The SEER can be compared with the MPG value of a car (miles per gallon), where a higher value translates into a lower operating cost.

There is also an efficiency metric called the Energy Efficiency Ratio (EER), which has the same units. The difference is that the SEER considers the entire cooling season, while the EER is for test conditions defined by the Air-Conditioning, Heating and Refrigeration Institute (AHRI). In the case of heat pumps there is also a Heating Seasonal Performance Factor (HSPF), which is the ratio of heating output in British Thermal Units to electricity input in watt-hours.

Mini-split systems have  a remarkable efficiency advantage when compared with conventional electric heating and cooling options. Assume a window-type air conditioner and a resistance heater are replaced with a heat pump, having a SEER of 18 and HSPF of 9. In this case, space cooling savings of 50% or more can be expected, while heating savings exceed 60%.

Rebates for Air Conditioning Upgrades

In addition to delivering superior cooling efficiency, mini-split systems may be eligible for cash rebates from your utility company. Rebates improve the financial performance of air-conditioning upgrades. Since the upfront cost of the upgrade is reduced, the return on each dollar spent is increased.

MEP Engineering Recommendations Before Upgrading Space Cooling Systems

When an AC unit that crosses a wall or window is replaced with a mini-split unit that does not, the cooling load is reduced because a large gap in the building envelope is closed. The upgrade is also a good chance to check if there are no other leaks, especially around windows and doors. This increases the energy savings from a space cooling upgrade, since the new unit is not only more efficient, but is also subject to a reduced load.

In dwellings that use incandescent lighting, it is also possible to reduce the cooling load by upgrading to LED lamps. Consider that a 60-watt incandescent bulb can normally be replaced with a 10-watt LED bulb. If 10 of them are replaced, there are 500 watts less of heat to handle, equivalent to slightly above 1,700 BTU per hour.

Window-type, through-the-wall and PTAC units only have one advantage in terms of performance: they provide a constant supply of fresh outdoor air.

Mini-split units are unable to provide ventilation due to their system configuration, so it is important to verify that the existing ventilation system is sufficient after removing the previous AC unit. Ventilation systems are normally designed to be self-sufficient, but getting a professional opinion is recommended nevertheless; poor ventilation leads to various health issues.

Conclusion

Window-type, through-the wall and PTAC space cooling systems are among the least efficient, but still the most commonly used in multi-family buildings. Mini-split systems can reduce cooling expenses by 50% or more, while Con Edison incentives make them more affordable. However, like with any upgrade to building systems, an assessment from an engineering professional is recommended to achieve the best results. Even a high-efficiency space cooling system will perform poorly if it does not match the intended application. Ensuring that the new equipment is eligible for rebates is also important, so MEP engineering professionals should make this a priority.

Top searches related to Fire Protection Engineering Quincy, IL.

Value Engineering Examples

(MEP) Engineering Service in Quincy

MEP Engineers Quincy! If you re looking for a reliable MEP Engineering in Chicago? The one to go to is is New York Engineers. Not only for MEP Firms in Chicago but also Architectural Engineering and Sprinkler System Engineering in Quincy. Call us at (312) 767.6877 Quite a few construction companies throughout Monsey, New York have come to depend on New York Engineers for a wide range of engineering services ranging [...]

2018-09-21T17:07:28+00:00