MEP Engineering Services in River North Chicago, IL.

MEP Meaning

Building owners throughout Ossining, New York have come to depend on NY-Engineers.Com for a wide range of engineering services ranging from Mechanical Engineering to CAD to Revit Modeling. For this reason building owners in River North Chicago will tell you that if you are searching for a dependable MEP Engineering firm in River North Chicago, IL you need to consider NY Engineers.

Chances are, you might have walked into any particular sort of building and seen the results of MEP Engineering. Basically, MEP concentrates around the mechanical, electrical and plumbing aspects of engineering. Basically, the name already gives rise to the most typical and accurate theory of exactly what is MEP. Our article goes into some infor of what is MEP Engineering.

As far as the mechanical part is involved, for commercial and residential engineering, this relates to anything which moves. Moreover its entails the usage of complex and straightforward machines and also other mechanical mechanisms to carry out certain tasks. Some ordinary mechanical engineering jobs which is often noticed on a day to day bacis are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems which deal with increasing the energy productivity.

The electrical facet of construction is focused on the functions, components, electrical safety, and even more importantly, the wiring associated with a building. Engineers with this section try very hard to make sure that the schematics of any building are made to supply ample electricity to every component in a safe manner where each of the electrical codes are followed. Some common electrical engineering functions can be found in the lighting design, modifying the voltage and distributing the power to each component in the building which demands a supply.

As far as plumbing, there may be a wide array of plumbing components that constitute the final model of any building. Plumbing engineering goes deeper than simply faucets, toilets, and sinks, and holds several behind the scene appliances. These being the sewage and drainage lines and also the buildings domestic water supply and just how it flows.

As we conclude this article we have just considered what is MEP Engineering. MEP Engineering is administered in the construction industry. And, aids in completing the simply ignored technical aspects of any building.

Hiring an MEP Engineering Firm in River North Chicago is Necessary for Major Construction Projects

Using an MEP engineering company in Crestline Chicago, Illinois, might have a whole lot to do with the safety of your construction project. These specialists can help offset the cost of making this sort of hiring decision with regards to energy saving alone. When you are speaking about huge commercial buildings, energy management is really a topic of discussion. It’s time to learn various other great reasons behind hiring MEP engineers in Grand Crossing Chicago, Illinois.

Engineers have everything to do with the physical reliability of a building. If you can well imagine, it means the hidden is very vital. Design not just deals in aesthetics but the foundation of a building also its components. That is certainly yet another solid reason why hiring an MEP engineering firm will be beneficial to your project.

Think about all of the pipes and plumbing. Look at the air conditioning systems and the importance of getting all of its mechanics in the exact places. Energy conservation was stated, however energy competence is another important term to note. Energy competence is related to your HVAC system, and it plays a huge role in energy maintenance in general.

Think of your building’s shell. Consider setting up fire alarm systems as well as the safety and security measures put in place through the entire structure. With everything talked about thus far, it’s reliable advice that numerous facets of building construction may be either overlooked or underestimated without MEP engineers on-the-job.

Now with all you have read you will be looking to find the best MEP engineering firm in the industry, right? It is very clear the best engineers need to be in the large building of commercial buildings. Tailor made may be the best term to utilize to illustrate the way these experts will alter a construction project to meet the requirements of your respective operations. Even with all of this information you would like more details about the MEP Engineering services in River North Chicago, IL by NY Engineers we invite you to visit at our blog.

Building Commissioning Related Blog Post

Cut Costs: Simplify Your MEP Engineering Design

Fire Protection Engineering UMD

There are savings opportunities throughout the entire engineering process, not just the construction stage. With effective communication and adequate team management, it is possible to optimize the design process and reduce costs of your MEP engineering project without compromising quality. High-level design software also helps: it may come at a high price, but the time and cost savings are significant.

When the engineering design process becomes long and expensive, it is typically due to one of the following factors:

  • Poor communication between design teams. This is especially important in the case of mechanical, electrical and plumbing systems – all three have complex physical layouts, and there is a high chance of overlap between components of different systems when team communication is poor.
  • Excessive changes. MEP designs are carried out on existing architectural plans, which means architectural changes can become very disruptive as the MEP design process approaches completion. Completing the final version of the architectural design is highly recommended before MEP design starts; a major architectural change after MEP design has been completed can greatly extend the design process and its cost. Changes to MEP systems are also disruptive, since they have a high degree of interdependence.

This article will provide some recommendations that can help you simplify the engineering design process while reducing its cost. There is a basic rule of thumb for cost optimization: modifications are cheap or even free when requested early in the design process, and prohibitively expensive when requested in the final stages of construction.

1) Involve All Project Stakeholders Before the Design Process Starts

If the needs and requirements of all parties are clearly stated from the beginning, they can be accounted for during project design. For example, some contractors and equipment vendors may have special requirements; if this information is known before MEP engineering design starts, changes are avoided later. These changes normally add man-hours to the design process, and if omitted they may result in expensive modifications during construction.

Make sure your MEP design team reviews all equipment specifications before the design process starts, ensuring any special requirements are accounted for. Keep in mind that some building systems involve all three areas of MEP; for example, chilled water systems involve both electrical installations and hydronic piping.

2) Follow an Integral Approach for Mechanical, Electrical and Plumbing Design

As previously stated, these three systems have very complex layouts, and if design teams don’t work in coordination, you are very likely to have issues with overlapping equipment locations. Also, keep in mind that all three systems distribute fluids or air throughout the building, and the means of distribution must not interfere with each other.

  • Mechanical systems typically involve air ducts, refrigerant lines and hydronic piping. If combustion-based heating is deployed, there will also be a chimney for flue gases, along with fuel piping and tanks.
  • Electrical Systems involve conduit and wiring, and there are also bus ducts in high-power applications. Keep in mind that transformers, motors, generators, panelboards and similar equipment may require a lot of space, and clearances may be required with respect to walls and other pieces of equipment.
  • Plumbing Systems involve pumps, as well as independent piping for potable water, wastewater, etc.

The layout of ducts and piping must be specified so that the least amount of materials is used, but taking care not to overlap components from different building systems.

3) Use Three-Dimensional MEP Engineering Design Software

There are now MEP design solutions where a three-dimensional model of the building is stored in a web server that can be accessed by all design teams, and building systems are laid out and specified directly on the model. This offers several advantages over conventional two-dimensional design:

  • Equipment locations can be visualized more clearly, especially when components from all three systems must be installed in tight spaces.
  • Modern MEP design software is smart enough to detect overlap, and design engineers can be notified immediately if it occurs. For example, if the optimal location for two pieces of equipment is the same, they can decide which of the two devices can be relocated for the least cost.
  • The confusion associated with different versions of the same design is eliminated; versions no longer exist, since the entire design process is carried out on a unified 3D model.
  • Most three-dimensional MEP design software can calculate all bills of materials (BOM) automatically, further reducing the total man-hours required for the project.

MEP design software has a high upfront cost, but the investment is compensated by the sheer number of man-hours saved. Also, there are now software solutions with the option of paying a recurring monthly fee, instead of an expensive one-time license. This purchasing model tends to be more attractive for smaller companies with limited budgets.

Having a well-trained staff is just as important as implementing a powerful software solution. If you will invest in a high-level MEP design package, make sure your engineering team learns how to use it effectively. For example, software solutions often have keyboard shortcuts and commands that considerably speed up the work, and using them is much faster than clicking on functions with the mouse. The difference may not be evident for a single action, but when you consider the total man-hours saved the effect is significant.

4) Use a Project Management Platform

E-mail is not always practical when coordinating multidisciplinary teams: tasks must be assigned textually, and there is always the chance of missing or misspelling one of the e-mail addresses. There are now project management platforms where team members can be added to common dashboards, and notifications are sent automatically whenever a task is assigned, modified or completed.

Project management platforms allow team members to focus on the tasks assigned, while communication is streamlined and automated in the background. For example, marking a milestone as finished and linking a project deliverable is faster than sending an e-mail to the entire team with the file as an attachment.

5) Consider Outsourcing the Entire MEP Design Process

Having an in-house engineering team may make sense in industrial settings, or other business sectors where technical assistance is required on an ongoing basis. However, there are companies for which the cost of a permanent engineering staff can’t be justified, and in makes more sense to hire an external firm specializing in MEP design and consulting. This way, the client can save the capital and time required for workstations, software and team building, dedicating it to core business activities instead.

If you will follow this approach, we strongly recommend you hire a firm that provides integral MEP design; if you hire separate designers for mechanical, electrical and plumbing installations, projection integration will be a daunting task.

Concluding Remarks

When optimizing the engineering design process, remember that poor team communication and frequent changes are the main factors that increase costs. With the combination of solid management practices, information technologies and strategic outsourcing, you can improve results while cutting costs. Effective communication before and during your MEP engineering project also promotes collaboration and mitigates conflict.

Popular searches related to Plumbing Engineering in River North Chicago, IL.

HVAC Engineers Near Me

(MEP) Engineering Service in River North Chicago

How Can Our River North Chicago MEP Engineers Help You! Quite a few real estate investors throughout Brentwood, New York have come to depend on NY-Engineers.Com for a wide range of engineering services ranging from Plumbing Engineering to Construction Administration. This is why building owners in River North Chicago will tell you that if you are searching for a excellent MEP Engineering firm in River North Chicago, Illinois you should consider NY [...]

2018-08-28T08:55:07+00:00