MEP Service in Sauganash Chicago, IL.

Contact Us

Searching for a top rated MEP Firms in Chicago? Your best bet is to reach out to is New York Engineers. Not only for MEP Chicago but also Construction Engineering and Sprinkler Engineering throughout Sauganash Chicago. Call 312 767-6877

Contact Us
HVAC Mechanical Engineer

Construction companies throughout Peekskill, NY have come to rely on New York Engineers for a wide range of engineering services ranging from Plumbing Engineering to Building Commissioning. For this reason real estate investors in Sauganash Chicago will tell you that if you’re seeking a top-rated MEP Engineering firm in Sauganash Chicago, IL you should consider New York Engineers.

Chances are, you have walked into any specific kind of building and saw the outcomes of MEP Engineering. Simply put, MEP concentrates in the mechanical, electrical and plumbing facets of engineering. In essence, MEP already gives rise to the most typical and spot-on assumption of what is MEP. This article will go into some information on what is MEP Engineering.

As far as the mechanical aspect is concerned, both for residential and commercial engineering, this handles anything which moves. Furthermore its entails the use of complex and uncomplicated machines and also other mechanical mechanisms to do certain tasks. Some normal mechanical engineering jobs which can be noticed daily are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems which handle boosting the energy efficiency.

The electrical facet of construction is focused on the functions, components, electrical safety, and above all, the wiring of the building. Engineers with this department try very hard to make sure that the layout of the building are designed to deliver ample power to every component in a safe manner where all the electrical codes are followed. Some commonplace electrical engineering functions can be found in the lighting design, modifying the voltage and allocating the electricity to every single component in the structure that takes a supply.

As far as plumbing, there is certainly a variety of plumbing components which make up the final model of any building. Plumbing engineering goes deeper than just sinks, faucets, and toilets, and accommodates several behind the scene devices. These being the sewage and drainage lines as well as the buildings domestic water supply and the way it flows.

As we conclude this article we have now just checked out what is MEP Engineering. MEP Engineering is managed throughout the construction industry. And, aids in completing the simply ignored technical areas of any building.

Hiring an MEP Engineering Firm in Sauganash Chicago is Essential for Huge Construction Projects

Hiring an MEP engineering company in Pulaski Park Chicago, Illinois, might have a whole lot to do with the success of your construction project. These professionals may help offset the cost of making this type of hiring decision when it comes to energy upkeep alone. When you are talking about large commercial structures, energy saving is really a topic of discussion. It’s time to learn some other great causes of hiring MEP firm in Edison Park Chicago, IL.

Engineers have a lot to do with the structural integrity of any building. If you can well imagine, it means the unseen is very essential. Design not simply deals in looks but the base of a building including its workings. That is the next solid logic why using an MEP engineering company is going to be good for any project.

Think of every one of the pipes and plumbing. Look at the cooling and heating systems and how important it is to get all its mechanics inside the correct places. Energy saving was discussed, but energy competence is yet another vital term to discuss. Energy efficiency is related to your HVAC system, plus it plays a vital part in energy conservation in general.

Consider your building’s footing. Consider setting up security systems and the security and safety measures set up along the entire structure. With everything else discussed up to now, it’s reliable advice that lots of aspects of building construction might be either disregarded or underestimated short of MEP experts at work.

Now with this info you are going to be looking to find the best MEP engineering firm in the industry, right? It is pretty obvious how the best engineers really need to be working in the large scale building of commercial structures. Tailor made is the proper term to utilize to describe just how these specilists will customize a construction job to meet the requirements of your own operations. Even with all of this information you would like more details on the MEP Engineering services in Sauganash Chicago, Illinois by New York Engineers you should check out at our blog.

New Fire Protection Engineering Related Post

Advantages of Electronically Commutated Motors in Electrical Engineering

Value Engineering Architecture

Electronically commutated motors (ECMs) can achieve significant energy savings in electrical engineering applications where fractional horsepower is required. Although NEMA Premium Efficiency motors with variable-frequency drives provide the most efficient solution to drive equipment above 1 hp, induction motors are outclassed by ECMs as the rated horsepower is reduced.

What is an Electronically Commutated Motor?

Although ECMs are designed to run with an AC power supply, it is important to note they are actually direct-current motors with permanent magnets on their rotor. Unlike conventional DC motors, which create a rotating magnetic field with a combination of brush contacts and slip rings, ECMs achieve the same effect with a voltage rectifier and an electronic control circuit. As a result, the friction and sparks associated with brush contacts are eliminated, and this is one of the reasons why ECMs are so efficient. They also have a longer service life than brushed motors, since the wear associated with sparks and friction is eliminated. Compared with other common types of fractional horsepower motors, ECMs are the top choice in terms of efficiency:

  • Shaded-pole motors are very common and more affordable, but their efficiency is very poor, going below 20% in some cases.
  • Permanent-split capacitor (PSC) motors have an average efficiency of 40%, which means they outclass shaded-pole motors. In terms of efficiency, they are an intermediate option between shaded-pole motors and ECMs.
  • ECM efficiency is normally above 60%, which means they consume one-third of the energy used by shaded-pole motors on average.

ECMs can also be manufactured with built-in speed control circuits, allowing them to operate at reduced speed without relying on an external VFD. It is also important to note that ECMs do not suffer a drastic reduction in their efficiency when operating below rated RPM. Fixed-speed ECMs are also available for applications where speed control is not necessary.

Electronically Commutated Motors in Electrical Engineering Applications

ECMs are normally the most efficient option in fractional horsepower applications, but they tend to deliver the highest savings when used in air-conditioning and refrigeration systems. Being more efficient that shaded-pole and PSC motors, they also dissipate less heat, and the reduced heating effect helps AC and refrigeration systems operate more efficiently. This effect applies for all air-conditioning or refrigeration components that are found inside the conditioned space, such as air handlers and evaporators.

As an example, assume a cold-storage room has an evaporator unit with five shaded-pole motors, consuming 900W each. They are replaced with ECMs that only consume 300 W each.

  • 600 W are saved per motor, for a total of 3,000 W.
  • However, these 3,000 W are also subtracted from the refrigeration load. If the system operates with a coefficient of performance of 3, an extra 1,000 W of electric power are saved.
  • In other words, this upgrade saves 3 kW in motor power and 1 kW thanks to refrigeration load reduction.

Keep in mind this is just a simple example, and each electrical engineering project requires a detailed analysis to know the exact savings. However, the heating reduction benefit applies for all cases where ECM motors are deployed in air-conditioned or refrigerated locations.

The brushless design of ECMs makes them quieter than their less efficient counterparts, which also provides a comfort advantage. In business applications, the silent operation of ECMs helps employees concentrate better. ECMs are also lighter than other types of fractional horsepower motors, which makes them easier to install.

Electronically Commutated Motors in Ventilation Systems

As previously stated, shaded-pole and PSC motors are inefficient. Also, three-phase motors with VFDs are impractical for fractional horsepower applications, unable to offer the efficiency that characterizes them in larger systems. Ventilation systems represent an excellent opportunity to deploy ECMs, for two main reasons:

  • Fans with fractional horsepower are common, which means they are often driven by shaded-pole or PSC motors.
  • Many fans have intermittent operation, which represents a chance to use ECMs running at reduced speed. For example, running a fan 80% of the time saves 20% of the energy, while running it at 80% speed saves nearly 50%.

ECMs are a highly recommended upgrade for furnace fans, since they can achieve a much more uniform temperature distribution with their speed control, in addition to offering the energy savings that characterize them.

Payback Period of ECM Upgrades

Like with many energy efficiency measures, the financial benefit of an ECM upgrade changes depending on project conditions. The project payback period can only be calculated with precision after a detailed analysis by a professional energy consultant, but in general the following results can be expected:

  • Replacing shaded-pole motors normally yields a faster payback period than replacing PSC motors, since the efficiency gain is higher. Of course, there can be exceptions; replacing a PSC motor that is used frequently may yield higher savings than upgrading a shaded-pole motor that is only used moderately.
  • ECMs can also be an attractive option in appliances that require speed control. Other types of motors may suffer a drastic efficiency reduction at partial speed.
  • As previously mentioned, the energy savings are higher when ECMs are deployed in air-conditioned or refrigerated spaces.

The financial return of an ECM upgrade can also be enhanced if there are incentive programs at the project’s location. The incentive is calculated based on yearly energy savings, at a rate of $0.16/kWh.

Conclusion

Electronically-commutated motors (ECMs) can achieve significant energy savings in fractional horsepower applications, especially when they replace shaded-pole motors. However, like with any energy efficiency upgrade, professional guidance is highly recommended when defining the project scope and specifications.

When upgrading to ECMs, the return on investment is higher in some cases, and it others the payback period may be too long to justify the upgrade. Ideally, upgrades should focus on where the highest return is obtained from each dollar spent upfront. Recruit the help of an electrical engineering expertise to help you properly apply the information shared in this article to your project.

Common searches related to Electrical Engineering Sauganash Chicago, IL.

Value Engineering

(MEP) Engineering Service in Sauganash Chicago

MEP Company Sauganash Chicago! If you re searching for a fast responding MEP Firms in Chicago? The top choice is is NY-Engineers.Com. Not only for MEP Firms in Chicago but also HVAC Engineering and Sprinkler Engineering throughout Sauganash Chicago. Call us at 312 767-6877 The great majority of building owners throughout North Amityville, New York have come to depend on NY Engineers for a wide range of engineering services ranging from [...]

2018-09-05T23:19:21+00:00