MEP Engineering Services in South Edgebrook Chicago, IL.

Architectural Engineering Courses

Property owners throughout Harrison, New York have come to rely on NY Engineers for a wide range of engineering services ranging from Mechanical Engineering to Value Engineering. This is why building owners in South Edgebrook Chicago will tell you that if you’re searching for a excellent MEP Engineering firm in South Edgebrook Chicago, IL you need to consider NY-Engineers.Com.

It is very possible, you have walked into any particular type of building and seen the outcomes of MEP Engineering. In other words, MEP concentrates in the mechanical, electrical and plumbing areas of engineering. Essentially, MEP already gives rise to the most common and spot on guess of exactly what is MEP. This article will go into some information on what is MEP Engineering.

So far as the mechanical part is involved, for both commercial and residential engineering, this works with anything which moves. In addition its entails the application of complex and simple machines together with other mechanical mechanisms to execute certain tasks. Some ordinary mechanical engineering jobs which may be noticed on a day to day bacis are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems that take care of boosting the energy efficiency.

The electrical element of construction is focused on the electrical safety, functions, components, and more importantly, the wiring of any building. Engineers with this branch try very hard to make certain that the schematics of your building are created to deliver adequate power to every individual component in a safe manner where every one of the electrical codes are followed. Some common electrical engineering functions are available in the lighting design, regulating the voltage and allocating the electricity to each and every component inside the building that requires a supply.

So far as plumbing, there is certainly a variety of plumbing factors that constitute the final design of any building. Plumbing engineering goes deeper than simply faucets, toilets, and sinks, and accommodates several behind the scene appliances. These being the drainage line and sewage plus the buildings local water supply and how it flows.

As we conclude this article we certainly have just reviewed what is MEP Engineering. MEP Engineering is managed inside the construction industry. And, assists in completing the easily overlooked technical aspects of any building.

Hiring an MEP Engineering Firm in South Edgebrook Chicago is Essential for Huge Construction Projects

Employing an MEP engineering company in Belmont Gardens Chicago, ILO, may have everything to do with the success of your construction project. These specialists might help offset the cost of making such a hiring decision in relation to energy upkeep alone. If you are referring to big commercial structures, energy saving is a vital topic of discussion. It’s time to discover some other great reasons for using MEP engineers in Norridge Chicago, Illinois.

Engineers have a great deal to do with the physical integrity of any building. If you may well envision, it means the hidden is extreamly vital. Design not just deals in looks but the basis of a building including its workings. That is the next solid good reason that employing an MEP engineering firm will be helpful to any project.

Take into consideration every one of the pipes and plumbing. Take into account the heating and cooling systems and the importance of getting each one of its components in the right places. Energy maintenance was discussed, but energy competence is another significant term to speak of. Energy competence concerns your HVAC system, plus it plays a huge part in energy saving in general.

Think about your building’s shell. Consider installing security alarms along with the security and safety measures set up along the entire structure. With everything else discussed so far, it’s reliable advice that numerous areas of building construction may be either ignored or minimized short of MEP experts on the job.

Now with all you have read you will look for the best MEP engineering company available, right? It’s pretty clear that this best engineers need to be involved in the large scale building of commercial buildings. Customized is definitely the proper term to work with to clarify just how these engineers will alter a construction project to meet the needs of your own operations. There is a great possibility you would like more details on the MEP Engineering services in South Edgebrook Chicago, Illinois by NY Engineers we invite you to visit at our South Edgebrook Chicago Utility Filings blog.

Engineering Reports Related Blog Post

An MEP Engineers’ Guide to Air Dampers

Importance Of Value Engineering

An air damper is a device that uses valves or plates to stop or regulate the flow of air within a duct, chimney, variable-air-volume (VAV) box, air-handling unit or other similar pieces of equipment. Dampers are also used to stop airflow into unoccupied or unused rooms where air conditioning is not required. In addition, MEP engineers install dampers as protection measures against smoke or fire.

An air damper is a complex mechanism with many moving elements. Their main components are the blades, which adjust their position to control airflow. In addition, dampers include frames, linkages, axles, bearings, seals, blade pins, actuating motors, flanging, jackshafts, and sleeves, among other components.

Types of Air Dampers

Based on their construction, air dampers can be classified into parallel blade and opposed blade dampers. Each configuration has unique performance features and is intended for different applications.

1) Parallel Blade Dampers

In this type of air damper, blades rotate in the same direction, parallel to one another. The parallel blade configuration is typically used when the damper operates in two positions: open or closed.

These dampers redirect air flow along their first few degrees of rotation, as they move from fully open to closed, and therefore control is achieved along the first 20-30% of movement.  Rather than modulating air streams, these dampers change their direction, and that is the main reason why they are preferred for open-close operation or fixed flow control.

Parallel blade dampers are typically used by MEP engineers in applications where the damper represents a major portion of the overall system pressure loss. They should not be used upstream of critical components due to their uneven airflow.

2) Opposed Blade Dampers

In this type of air damper, blades rotate in opposite directions to one another, modulating airflow. These air dampers are mostly used when the system requires airflow control rather than open-close operation, but they can also be used for on-off service.

Opposed blade dampers are typically used in the following applications:

  1. When the damper doesn’t represent a major portion of the overall system pressure loss.
  2. Systems that are required to maintain an even airflow downstream from the damper.
  3. Ducted terminals.

Classification of Dampers by Control Method and Application

Air dampers can also be classified based on the control method they deploy and their intended application. Based on their control method, dampers can be either automatic or manual:

  • Automatic dampers are similar to automatic control valves in terms of functioning.
  • Manual dampers are adjusted manually depending on the required airflow, as implied by their name.

Dampers can also be classified based on their application, and the following are some of the main types:

  • Balancing dampers (volume dampers)
  • Face and bypass dampers
  • Fire dampers
  • Smoke dampers
  • Combined fire and smoke dampers
  • Gravity dampers (backdraft or barometric)
  • Mixing dampers
  • Multi-zone dampers
  • Round dampers
  • VAV boxes (variable-air-volume)

Note how dampers are not only used for air balancing in ventilation systems, but also for safety in fire protection applications.

Why Are MEP Engineers Concerned About Dampers?

Air dampers are an important element of MEP engineering design since their use is subject to code requirements. They should also be designed to minimize energy losses, through the prevention of heat exchange across them when in the closed position, all while maintaining the required pressure conditions in different spaces.

Air dampers are subject to the following codes and standards:

  1. National Fire Protection Association (NFPA) standards:
    1. NFPA 90A Standard for the Installation of Air-Conditioning and Ventilating Systems
    2. NFPA 92A Standard for Smoke-Control Systems Utilizing Barriers and Pressure Differences
    3. NFPA 101 Life Safety Code
  2. Underwriters Laboratories (UL) standards:
    1. UL 555 Standard for Fire Dampers
    2. UL 555S Standard for Smoke Dampers
    3. UL 555C Standard for Ceiling Dampers

The main locations where air dampers are required to meet code are the following: stair enclosures, elevator shafts, common corridors, mechanical rooms, fire-rated walls, exterior building walls, shaft enclosures, horizontal assemblies, and duct and transfer openings.

Air Dampers in Fire Protection Applications

The three main types of dampers used in fire protection applications are fire dampers, smoke dampers, and combined fire/smoke dampers. This section provides an overview of each type and its applications.

Fire Dampers

Fire dampers interrupt airflow through the duct automatically, restricting the passage of flames. To accomplish their function, these dampers are installed in ducts that cross fire-rated assemblies or fire-rated walls. They can be installed in both horizontal and vertical ductwork and can be of both curtain type and multi-blade type.

A fire damper has the following components:

  1. Sleeve
  2. Curtain blade
  3. Break-away joints
  4. Fusible link
  5. Access door to inspect the fire damper

All fire dampers are installed in the open position, with a fusible link. When the temperature in the ductwork exceeds a specified value, the fusible link melts and the damper gets shut off, either by gravity or by a spring. To guarantee they accomplish their function, fire dampers need to pass various tests.

Fire damper selection is based on three main factors: fire resistance rating, temperature, and operating range. Fire rating depends on the time span for which a damper will withstand the heat associated with a fire. For walls, partitions, and barriers with fire resistance rating of less than 3 hours, 1.5-hour fire dampers are used. For fire barriers rated for 3 hours or more, 3-hour fire dampers are used. This procedure ensures building code compliance, which requires that the fire resistance rating is maintained across the full area of walls, partitions, and floors.

The exceptions for the use of fire dampers are parking garages, kitchen exhaust ductwork, and dryer exhaust ductwork.

Smoke Dampers

Smoke dampers prevent smoke from spreading in HVAC systems that are designed to shut down automatically in case of fire, and they only have two positions: open and closed. These dampers are installed in a slotted duct section – they are installed whenever a duct penetrates a smoke partition or smoke barrier inside the building. They can be applied in passive smoke control systems, or as part of an engineered smoke control solution.

In passive systems, smoke dampers close and prevent the circulation of air and smoke through ducts or ventilation openings that cross a smoke barrier. On the other hand, in engineered smoke control systems, the spread of smoke is controlled by the building HVAC system or by dedicated fans that create pressure differences. Smoke dampers may be controlled by heat sensors, smoke sensors, fire alarms, or any other method that meets the design intent.

A smoke damper has the following components:

  1. Sleeve
  2. Smoke blades (parallel)
  3. Break-away joints
  4. Duct-mounted smoke detector
  5. Damper actuator
  6. Access door

It is important to decide which ratings are required for UL Listed fire dampers.

  • The SD-1320 and SD-1330 smoke dampers are UL/cUL leakage rated dampers, listed under the latest UL 555S standard.
  • SD-1620 smoke dampers meet UL Class II. Leakage is less than 20 cfm per square foot at 4 inch w.g. and at 350°F (177°C).
  • SD-1630 smoke dampers meet UL Class I. Leakage is less than 8 cfm per square foot at 4 inch w.g. and at 350°F (177°C).

Fire and Smoke Damper (Combined)

As implied by its name, this type of damper is a combination of a fire damper and a smoke damper, and it is installed in ducts that cross partitions rated as both fire and smoke barriers. This type of damper must be qualified under both UL555 and UL555S.

Selection of a combined fire and smoke damper depends upon 4 factors: fire resistance rating, leakage rating, temperature and operational ratings.

Combined fire and smoke damper applications include walls, floors, partitions required by the local building code.

For walls, partitions, and barriers with fire resistance rating of less than 3 hours, 1.5-hour fire/smoke dampers are used. For fire barriers rated for 3 hours or more, 3-hour fire/smoke dampers are used. Designers are usually suggested to pick a very low leakage category.

Conclusion

Air dampers have a wide range of applications, ranging from airflow modulation in normal operating conditions to providing a reliable barrier against smoke or fire during emergencies. However, code compliance is an important aspect to consider regardless of the application, so working with qualified MEP engineers is highly recommended.

Common searches related to Utility Filings South Edgebrook Chicago, IL.

Electrical Engineering Schools

(MEP) Engineering Service in South Edgebrook Chicago

How Can Our South Edgebrook Chicago MEP Engineers Help You! A large group of property owners throughout Garden City, NY have come to depend on NY-Engineers.Com for a wide range of engineering services ranging from Sprinkler Engineering to Energy Modeling. This is why real estate investors in South Edgebrook Chicago will tell you that if you're looking for a dependable MEP Engineering firm in South Edgebrook Chicago, Illinois you should consider NY [...]

2018-08-30T02:37:24+00:00