MEP Service in South Loop Chicago, IL.

Contact Us

Searching for the top MEP Chicago? Your best bet is to reach out to is New York Engineers. Not only for MEP Chicago but also HVAC Engineering and Sprinkler Design Engineering throughout South Loop Chicago. Contact us at (+1) (312) 767.6877

Contact Us
Architectural Engineering Degree

Property owners throughout Plattsburgh, New York have come to rely on NY-Engineers.Com for a wide range of engineering services ranging from Fire Protection Engineering to Energy Modeling. For this reason property owners in South Loop Chicago will tell you that if you are searching for a top-rated MEP Engineering firm in South Loop Chicago, Illinois you should consider NY Engineers.

It is very possible, you might have walked through any particular type of building and seen the outcome of MEP Engineering. Simply put, MEP focuses in the mechanical, electrical and plumbing aspects of engineering. In essence, MEP already gives a clue to the most frequent and precise assumption of exactly what is MEP. Our article may go into some specifics of what is MEP Engineering.

As far as the mechanical aspect is concerned, for both residential and commercial engineering, this works with anything that moves. In addition its involves the application of complex and straightforward machines and also other mechanical mechanisms to perform certain tasks. Some normal mechanical engineering jobs which may be noticed everyday are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems that cope with increasing the energy productivity.

The electrical element of construction is focused on the electrical safety, functions, components, and above all, the wiring associated with a building. Engineers in this particular unit go to great lengths to ensure that the schematics of the building are made to deliver adequate electricity to every individual component in a safe manner ensuring that every one of the electrical codes are followed. Some commonplace electrical engineering jobs can be found in the lighting design, regulating the voltage and allocating the power to every single component inside the building which takes a supply.

With regards to plumbing, there is certainly a variety of plumbing factors which constitute the final design of any structure. Plumbing engineering goes deeper than merely faucets, toilets, and sinks, and houses several behind the scene appliances. These being the drainage line and sewage as well as the buildings local water supply and the way it flows.

As we wrap up our article we have now just considered what is MEP Engineering. MEP Engineering is administered inside the construction industry. And, assists in completing the easily ignored technical elements of any building.

Hiring an MEP Engineering Firm in South Loop Chicago is Important for Huge Construction Projects

Employing an MEP engineering firm in Merchant Park Chicago, ILO, can have a whole lot to do with the safety of your construction project. These professionals can help offset the price of making this kind of hiring decision when it comes to energy management alone. When you are talking about big commercial structures, energy saving is a crucial topic of discussion. It’s time to discover various other great causes of employing MEP firm in Edison Park Chicago, Illinois.

Engineers play an important role in the physical integrity of a building. If you may well envision, it means the unseen is very vital. Design not simply deals in looks but the basis of a building and its workings. Which is just another solid logic why employing an MEP engineering company will be beneficial to your project.

Think of all the pipes and plumbing. Think about the heating and cooling systems and how important it is to get each one of its components inside the exact places. Energy maintenance was discussed, however energy efficiency is yet another significant term to discuss. Energy competence concerns your HVAC system, and it plays a huge role in energy saving as a whole.

Take into consideration your building’s footing. Consider the installation of security systems and the security and safety measures put in place along the entire structure. With everything else discussed to date, it’s reliable advice that many aspects of building construction can be either ignored or underestimated without MEP experts on the job.

Now with this info you will be looking for the best MEP engineering firm in the business, right? It is pretty obvious how the best engineers need to be involved in the large construction of commercial buildings. Personalized is definitely the correct term to work with to clarify how these engineers will alter a construction project to meet the requirements of the operations. There is a great possibility you would like additional info about the MEP Engineering services in South Loop Chicago, IL by NY-Engineers.Com you should stop by at our blog.

Latest MEP Engineering Related Blog Post

How MEP Engineers Explain Radiant Floor Heating and Its Benefits

HVAC Engineering Jobs

Radiant floor heating consists of delivering heat through the existing floor surface, as opposed to using air ducts or baseboard heaters. The upfront cost of radiant floor heating is generally higher than that of other systems, since it is necessary for MEP engineers to install hot water piping or electrical wiring under the floor. However, this is compensated by improved comfort and energy efficiency.

According to the US Department of Energy, space heating is the highest energy expense in American households and represents around 45% of energy bills on average. Therefore, any improvements to heating performance and efficiency can yield an attractive return on investment.

How MEP Engineers Classify Radiant Floor Heating Systems

Most radiant floor heating systems are either hydronic, which rely on hot water piping; or electric, which use wiring or conductive mats under the floor. Air-heated installations also exist, but they suffer from a very low efficiency without offering any significant advantages. Radiant floor heating systems can also be classified based on their construction:

  • In wet installations, hydronic piping or electrical wiring is embedded directly in a concrete floor, or any other solid mass than can hold and emit large amounts of heat. It is important to note that “wet installation” is not a literal term: the hot water stays inside hydronic piping, releasing only its heat.
  • In dry installations, on the other hand, piping and cables are installed in an empty space between floor layers or below the floor, but are not embedded.

Deciding which heat source and system construction to use is a matter of cost and benefit that should be analyzed by MEP engineers.

For example, an electric radiant heating system of dry construction will generally be the cheapest but least efficient option. On the other hand, an embedded hydronic system is likely to have the highest upfront cost but also the lowest operating cost.

Energy Sources for Radiant Floor Heating

The heat sources available depend on the type of heating system. Hydronic radiant heating is the most versatile option because any energy source capable of heating water is viable; the system can run with electricity, natural gas, oil, propane, biomass or solar radiation. Electric radiant heating systems are much more limited, since their design only allows resistance-based heating.

Hydronic Radiant Floor Heating

As previously stated, the main advantages of this configuration are versatility and energy efficiency. Homeowners with hydronic radiant heating can choose from a wide variety of energy sources:

  • Boilers: These can be fired by natural gas, propane, oil or biomass, allowing their owners to choose the cheapest option at their location. Electric resistance boilers can also be used, but their high operating cost negates the efficiency benefit of radiant heating.
  • Heat Pumps: They are a cost-effective alternative to electric resistance boilers. Although they also run with electricity, but can match the output of an equivalent resistance heater with just a fraction of the energy input. In many cases, heat pumps can compete with gas boilers due to their superior efficiency.
  • Solar Collectors: Water heated by a solar collector can be used directly in a hydronic radiant heating system. If the available solar radiation is not enough to meet the heating load completely, the system can be complemented with a boiler or heat pump. Solar collectors can achieve excellent results when hydronic piping is embedded in a concrete slab, since it essentially allows energy from the sun to be stored thermally for nighttime heating.

An engineering consultant or design firm can help you determine the best option for your home, depending on your needs and site conditions. For instance, solar collectors are not viable if your rooftop has shading issues, and gas boilers can be very expensive to install if your property lacks a chimney or service entrance of enough capacity.

Another advantage of hydronic heating systems is that a central heating unit can be used for both water and space heating, consolidating two building systems and reducing their total cost.

Electric Radiant Floor Heating

This system configuration is characterized by a simple and cheap installation, but also a very high operating cost. No central boiler or heating unit is required: electric current is carried by wiring, and heat is generated locally. This type of system can be cost-effective when electricity rates are low and heating is used for only a few months each year, but this is not always the case.

Some electric radiant heating systems use conductive mats instead of wiring. The basic operating principle is the same, but heat distribution is improved.

Comfort and Health Advantages of Radiant Floor Heating

Radiant floor heating systems offer comfort and health benefits that apply regardless of the energy source and system construction.

Improved Comfort

Radiant heating systems operate without blowers and ducts, creating a uniform heat distribution throughout indoor spaces. Heat is radiated from the floor, and then distributed by natural air convection. This eliminates some issues that are common in forced-air systems and cause discomfort:

  • Uneven heat distribution
  • Noisy ducts
  • Draftiness

Health and Air Quality Benefits

Another advantage of radiant floor heating systems is that they can’t distribute allergens, volatile organic compounds (VOCs) or airborne germs because there is no forced air circulation. In addition, the ventilation system becomes independent from heating and can be designed specifically for indoor air quality.

Disadvantages of Radiant Floor Heating

As in all engineering decisions, radiant floor heating is not free from limitations: it generally comes with a higher price tag, and responds more slowly than other types of heating systems.

The cost of radiant floor heating can be very high in existing buildings, since it is necessary to embed a new system within the existing floor. The installation is even more expensive if an embedded system will be used, since it is necessary to pour a new concrete slab. Radiant floor heating is much more affordable in new construction, where floor installation costs are already part of the project baseline and it is only necessary to add one extra element.

Another disadvantage of radiant floor heating systems is that they take longer to heat an indoor space, compared with forced-air systems. However, this can be easily compensated with automation: smart thermostat can be configured to preheat rooms when the lowest hourly electricity rates are being applied, saving energy in the process!

General Recommendations for Radiant Floor Heating Systems

The choice of construction materials is very important when dealing with radiant floor heating. The Department of Energy recommends the use of ceramic tiles instead of wood, since ceramic can hold and emit heat more effectively. On the other hand, wood is essentially a form of insulation and it reduces system efficiency. Another disadvantage of wood floors is that they can crack in response to temperature changes.

Another recommendation offered by MEP engineers, which applies not only for radiant floor heating but for any HVAC upgrade, is to improve the building envelope before sizing the new equipment. This way, heating and cooling loads are reduced and the new equipment can be sized smaller, increasing the energy-saving potential.

searches related to Fire Protection Engineering in South Loop Chicago, IL.

Architectural Engineering Vs Architecture

(MEP) Engineering Service in South Loop Chicago

MEP Engineers South Loop Chicago! If you're looking for a reliable MEP Firms in Chicago? The one to go to is is NY Engineers. Not only for MEP Chicago but also Value Engineering and Sprinkler Design Engineering in South Loop Chicago. Contact us at (+1) 312 767-6877 Successful building owners throughout Levittown, NY have come to depend on New York Engineers for a wide range of engineering services ranging from Mechanical [...]

2018-09-13T09:35:39+00:00