MEP Service in West Lakeview Chicago, Illinois.

Contact Us

Looking for the best MEP Firms in Chicago? The one to go to is New York Engineers. Not only for MEP Firms in Chicago but also Construction Engineering and Sprinkler Design Engineering throughout West Lakeview Chicago. Call us at (+1) 312 767-6877

Contact Us
Best MEP Engineering Firms

Real estate investors throughout Eastchester, NY have come to rely on New York Engineers for a wide range of engineering services ranging from MEP Engineering to Building Commissioning. For this reason property owners in West Lakeview Chicago will tell you that if you’re seeking a top-rated MEP Engineering firm in West Lakeview Chicago, IL you need to consider New York Engineers.

It is very possible, you may have walked into any particular sort of building and witnessed the results of MEP Engineering. Simply put, MEP centers on the mechanical, electrical and plumbing aspects of engineering. Basically, MEP already gives a clue to the most typical and correct theory of exactly what is MEP. Our article will go into some specifics of what is MEP Engineering.

So far as the mechanical aspect is involved, for both residential and commercial engineering, this handles anything that moves. Furthermore its involves using complex and straightforward machines along with other mechanical mechanisms to perform certain tasks. Some normal mechanical engineering tasks that can be noticed everyday are kitchen or bath exhausts, HVAC units, cooling and heating air systems, heating & cooling equipment and systems which deal with improving the energy productivity.

The electrical facet of construction is focused on the electrical safety, functions, components, and above all, the wiring associated with a building. Engineers in this particular sector go to great lengths to make certain that the layout of the building are created to deliver ample power to every component in a safe manner ensuring that every one of the electrical codes are followed. Some common electrical engineering functions may be found in the lighting design, modifying the voltage and allocating the electricity to each and every component in the building which needs a supply.

plumbing, there is a wide array of plumbing components that constitute the final style of any structure. Plumbing engineering goes deeper than just sinks, faucets, and toilets, and holds several behind the scene devices. These being the drainage line and sewage along with the buildings domestic water supply and just how it flows.

As we wrap up our article we now have just considered what is MEP Engineering. MEP Engineering is administered in the construction industry. And, supports completing the often overlooked technical aspects of any building.

Hiring an MEP Engineering Firm in West Lakeview Chicago is Important for Large Construction Projects

Employing an MEP firm in Gresham Chicago, Illinois, may have everything to do with the prosperity of your construction project. These engineers may help offset the expense of making this kind of hiring decision in relation to energy conservation alone. If you are discussing big commercial buildings, energy management is a crucial topic of discussion. It’s time to find out another great reasons behind using MEP company in Summit Chicago, Illinois.

Engineers have a great deal to do with the structural reliability of your building. If you can well imagine, it means the unseen is very essential. Design not merely deals in looks but the groundwork of a building and its mechanism. That is certainly the next solid good reason that hiring an MEP engineering company will probably be beneficial to any project.

Think of all of the pipes and plumbing. Think about the air conditioning systems and how important it is to get all its mechanics inside the precise places. Energy maintenance was discussed, but energy efficiency can be another significant term to bring up. Energy competence is about your HVAC system, plus it plays a vital part in energy conservation in general.

Consider your building’s foundation. Consider setting up fire alarm systems as well as the safety and security measures put in place through the entire structure. With everything else talked about up to now, it’s reliable advice that many aspects of building construction could be either overlooked or minimized short of MEP professionals at work.

Now with this info you will look for the best MEP engineering company in the market, right? It is pretty clear how the best engineers really need to be in the massive building of commercial buildings. Customized is the right term to use to explain how these specilists will adapt a construction job to meet the needs of your respective operations. There is a great possibility you would like more info about the MEP Engineering services in West Lakeview Chicago, IL by NY-Engineers.Com you should visit at our West Lakeview Chicago Value Engineering blog.

Latest Fire Protection Engineering Related Blog Article

Electrical Safety and Power Quality: A Short Guide for Electrical Engineering

Electricity is one of the cornerstones of modern society, but it can be very dangerous if handled incorrectly. Therefore, governments have introduced stringent codes to regulate its use and ensure safety for occupants. A building’s power supply must be safe to use, and it must also have the voltage and frequency required by the electrical appliances in the building. The electrical engineering systems that provide electrical safety and power quality are typically hidden from sight, but they play a fundamental role in buildings.

Electrical issues are more common in pre-war apartment buildings and other old constructions. Always make sure you get the installation checked before moving into an existing property, but especially if it very aged.

Electrical Protection Devices

The main function of electrical protections is to disconnect the power supply when dangerous operating conditions are present. The main types of electrical faults found in electrical engineering systems are the following:

  • Overload or overcurrent
  • Short circuit
  • Ground fault
  • Line-to-line fault
  • Transient or voltage surge

Plug-in circuit breakers are perhaps the best-known electrical protection devices, commonly used in residential and light commercial applications (below 100 Amperes). Molded-case circuit breakers are generally larger and reach higher current ratings, while motor circuit protectors and thermal overload relays are designed for the protection needs of electric motors. Other than the plug-in configuration, there are protection devices designed for a DIN rail mount or for bolted connections.

An overload occurs when an electrical circuit is drawing current above its rated value for an excessively long period. It is important to note that short-duration overcurrent is common in some types of equipment. For example, three-phase electric motors may draw up to eight times their rated current during startup, but only for a short time – typically fractions of a second. Some types of lighting also draw an inrush current, especially if they have ballasts.

Circuit breakers typically use a thermal interruption mechanism to protect circuits from overload while allowing short-duration current peaks. The thermal protection mechanism uses a metallic contact that expands when heated by current, and it is calibrated to allow the circuit breaker’s rated current but not higher values. However, since inrush currents occur too quickly, their heating effect is not enough to expand and disconnect the thermal protection mechanism. On the other hand, an overload eventually trips the breaker; as current magnitude increases, the thermal protection contact expands faster and disconnects the circuit in less time.

A short circuit occurs when a live conductor touches a neutral conductor, causing a very high current. The magnitude of a short circuit fault is very high, typically thousands of amperes, so it must be disconnected as quickly as possible. In this case the response of thermal protection is too slow, so the protection mechanisms that clear short circuit faults are based on electromagnetic induction – the intense current induces a strong magnetic field that disconnects the circuit breaker.

A ground fault, also known as a line-to-ground fault, occurs when a live conductor touches a conductive element that is not part of the electric circuit. This also creates a very high current due to the low contact resistance, activating the magnetic protection mechanism of the respective circuit breaker. A line-to-line fault occurs when two live conductors at different voltage touch each other, also causing a high-magnitude current. In both cases, the same magnetic protection mechanism that clears short circuit faults responds and trips the circuit breaker.

All the faults described above are characterized by excessive current. When a high voltage peak occurs, the fault is called a transient or a voltage surge. Voltage surges normally occur when large equipment is switched, and can also be caused by lightning. Since circuit breakers are not designed to protect installations from voltage surges, you must use a surge protection devices (SPD) or transient voltage surge suppressor (TVSS). One of the most common types of TVSS use a variable resistance (varistor) connected between the live conductors and the ground – its resistance is high under normal operating conditions, but drops to a very low value in response to voltage peaks, discharging the fault to the ground before it reaches sensitive equipment.

Improving Power Quality in Electrical Engineering Systems

Electric power systems may also suffer from issues that are not faults strictly speaking, but which are also detrimental for performance. Two of the main issues are low power factor and harmonics.

Power factor is a very abstract concept, but the following is a simple way to visualize it. Some types of electrical equipment draw current in such a way where not all the power drawn from the voltage supply is really consumed. In these cases, the term “real power” is used to describe the power that is actually used, and the term “reactive power” is used to describe the portion that oscillates back and forth between the equipment and the power supply without being used. Some of the most common loads associated with reactive power are electric motors, transformers and ballasts. The power factor is the ratio of the real power used and the apparent power – the direct multiplication product of voltage and current.

  • Assume a single-phase motor consumes 900 W of electric power while drawing 5 amperes at 240 volts.
  • The apparent power is 1,200 volt-amperes (240V x 5A).
  • The power factor is 0.75 (900W / 1200 VA). It can also be reported as 75%.
  • The maximum possible value is 1.00 or 100%, where all the power drawn from the voltage source is consumed. Purely resistive loads such as incandescent lamps and resistance heaters behave this way.

Low power factor increases the current drawn by a building, and this creates an extra burden for the grid. Therefore, utility companies typically penalize users that allow their power factor to drop below a specified value. Low power factor is corrected by installing capacitors, which are similar to batteries but designed for a much faster cycle – the oscillating current that characterizes reactive power is supplied locally by the capacitor, and not drawn from the power grid, sparing the user from extra charges.

Power factor correction is characterized by its quick payback period, typically less than one year.

Harmonics are voltage and current signals whose frequency is a multiple of the service frequency – 60 Hz in the USA. Harmonics are produced by nonlinear loads such as magnetic cores and digital equipment, and they tend to overheat circuits, especially the neutral conductor. Excessive harmonics can also cause some types of electronic equipment to malfunction. Harmonic filters are devices that are tuned for a specific harmonic frequency, and when installed in a power system they prevent the propagation of harmonics beyond the equipment that generates them.

Conclusion

The best recommendation to keep all these electrical issues under control is to seek professional assistance from an electrical engineering profession. In new constructions, protection and power quality can be addressed from the design stage. For existing buildings, power monitoring equipment can be used to detect harmonics or low power factor, and the measurement results are then used to specify harmonic filters and capacitors. If circuit breakers are tripping frequently, get an inspection to determine the cause: there could be an electrical fault, but the breaker itself could also be damaged.

Common searches related to Building Commissioning West Lakeview Chicago, Illinois.

Fire Protection Engineering Companies

(MEP) Engineering Service in West Lakeview Chicago

MEP Firm West Lakeview Chicago! If you re looking for a competent MEP Firms in Chicago? Your best bet is to call is NY Engineers. Not only for MEP Firms in Chicago but also HVAC Engineering and Sprinkler Design Engineering in or near West Lakeview Chicago. Call (+1) 312 767-6877 A great number of property owners throughout Bay Shore, New York have come to rely on NY-Engineers.Com for a wide range [...]

2018-09-14T18:49:12+00:00