MEP Service in Winthrop Harbor, Illinois.

Contact Us

Searching for a top rated MEP Firms in Chicago? Your best bet is to contact is New York Engineers. Not only for MEP Engineering in Chicago but also Electrical Engineering and Sprinkler Design Engineering in Winthrop Harbor. Call us at (+1) 312 767-6877

Contact Us
Architectural Engineering Requirements

Real estate investors throughout Wantagh, New York have come to depend on NY-Engineers.Com for a wide range of engineering services ranging from Sprinkler Engineering to Utility Filings. For this reason construction companies in Winthrop Harbor will tell you that if you’re searching for a excellent MEP Engineering firm in Winthrop Harbor, IL you should consider NY-Engineers.Com.

Odds are, you have walked through any particular form of building and seen the outcomes of MEP Engineering. Basically, MEP focuses around the mechanical, electrical and plumbing elements of engineering. In essence, MEP already gives a clue to the most frequent and accurate assumption of exactly what is MEP. This article goes into some specifics of what is MEP Engineering.

As far as the mechanical side is concerned, both for commercial and residential engineering, this relates to anything which moves. Additionally its involves the use of complex and straightforward machines and also other mechanical mechanisms to execute certain tasks. Some normal mechanical engineering tasks that may be noticed on a day to day bacis are HVAC units, kitchen or bath exhausts, cooling and heating air systems and equipment and systems that handle boosting the energy productivity.

The electrical facet of construction is focused on the functions, components, electrical safety, and even more importantly, the wiring associated with a building. Engineers with this unit go to great lengths to make certain that the schematics of the building are made to supply adequate power to each individual component in a safe manner where all the electrical codes are followed. Some familiar electrical engineering tasks are available in the lighting design, regulating the voltage and allocating the power to each and every component inside the structure which requires a supply.

So far as plumbing, there is a wide array of plumbing components that make up the final design of any structure. Plumbing engineering goes deeper than only toilets, faucets, and sinks, and contains several behind the scene devices. These being the drainage line and sewage and also the buildings household water supply and how it flows.

As we wrap up our article we certainly have just checked out what is MEP Engineering. MEP Engineering is managed inside the construction industry. And, supports completing the simply ignored technical areas of any building.

Hiring an MEP Engineering Firm in Winthrop Harbor is Necessary for Huge Construction Projects

Employing an MEP engineering company in Wentworth Gardens Chicago, ILO, may have a whole lot to do with the safety of your construction project. These pros will help offset the price of making this type of hiring decision with regards to energy saving alone. When you are speaking about huge commercial structures, energy conservation is really a topic of discussion. It’s time to discover another great reasons for employing MEP firm in Back of the Yards Chicago, Illinois.

Engineers play an important role in the physical reliability of a building. If you may well imagine, that means the hidden is extreamly vital. Design not merely deals in looks but the base of a building and its mechanism. Which is yet another solid logic why using an MEP engineering company will probably be useful to any project.

Think about every one of the pipes and plumbing. Take into account the air conditioning systems and the importance of getting each one of its mechanics inside the correct places. Energy maintenance was stated, however energy competence is yet another significant term to bring up. Energy efficiency is related to your HVAC system, and it plays an important role in energy conservation as a whole.

Take into consideration your building’s shell. Consider setting up home security systems along with the safety and security measures set up through the structure. With everything else mentioned to date, it’s reliable advice that a great many aspects of building construction may be either overlooked or minimized short of MEP engineers on the job.

Now with all you have read you will be looking for the very best MEP engineering company available, right? It’s very obvious that the best engineers must be involved in the massive building of commercial structures. Personalized is definitely the best term to work with to illustrate the way in which these engineers will customize a construction job to meet the needs of your operations. There is a great possibility you would like more information on the MEP Engineering services in Winthrop Harbor, IL by NY Engineers you should visit at our blog.

New Engineering Reports Related Blog Post

Understanding Value Engineering in Upgrading LED Lighting Systems: Lamp Replacements, Retrofits and Fixture Replacements

Value Engineering

LED lighting upgrades can be classified into three broad types based on how much the existing installation is modified: lamp replacements, retrofits and fixture replacements. You can normally achieve higher performance by upgrading more lighting system components, but the project cost is also increased. However, governments and utility companies may introduce rebate programs for energy-efficient lighting, and an expensive project can end up being high value engineering after a good rebate.

Like with any energy efficiency measure, a technical and financial analysis of the project is highly recommended before proceeding. This way, you can prioritize the specific upgrades that yield the highest return on investment. Although many factors determine project performance, the following tend to be the most relevant:

  • Upgrading lighting systems with long operating schedules first is recommended. Keep in mind that energy savings are the product of power saved and hours of use. The most efficient LED bulb in the market will not save much energy if the fixture where you install it is rarely used.
  • Lighting upgrades inside air-conditioned and refrigerated spaces provide two types of savings: a direct reduction in lighting power, and also a reduction of the amount of heat handled by cooling equipment.
  • The project achieves better results when the technology gap between the proposed and the existing lighting system is broader. For example, upgrading from incandescent to LED lighting yields more savings that upgrading from fluorescent, even if the final project consumes the same power in both cases.

This article will provide a brief overview of the main types of lighting upgrades, along with general recommendations for each case.

Value Engineering: Lamp Replacements

The simplest type of lighting upgrade is replacing existing bulbs with equivalent versions having better performance. This type of lighting upgrade can be performed quickly and for a relatively low cost, making it a value engineering option for companies who want to minimize disruption or who have a limited budget for energy efficiency projects.

Replacement lamps must also be selected with suitable lighting properties, depending on each application. They should deliver sufficient illuminance (lumens per square meter) while having the right color temperature (CCT) and the highest possible color rendering index (CRI) that meets the project budget.

  • Low CCT values (warm colors) work better when you want to create a relaxing environment, while high CCT values (cool colors) are recommended when visibility and awareness are important – in sports venues and manufacturing applications, for example.
  • On the other hand, the CRI is not specific for each application; a higher color rendition is always better but generally costs more.

Lighting designers use software such as DIALux to simulate the specified luminaires and fixtures, ensuring they deliver adequate lighting for their intended application.

If you are looking for replacement lamps, make sure you purchase products with the blue ENERGY STAR logo, which ensures high performance and intensive laboratory testing. In commercial and industrial applications you may find the DLC label instead (Design Lights Consortium). Both programs have very strict labeling requirements, so their respective logos indicate high quality and performance. They are mutually exclusive for most product categories, so don’t look for replacement lamps with both labels.

Retrofits

A retrofit is one step above a lamp replacement in complexity: existing lighting fixtures are reused, but with significant changes to their internal configuration.

  • An example of a retrofit would be taking a strip fixture with two 8-foot T12 fluorescent tubes and modifying it to use two parallel sets of 4-foot LED tubes.
  • This process involves bypassing or removing the ballast, changing the lamp bases, and adding additional bases halfway through the fixture body.
  • If the LED tubes specified use an external driver, it must be mounted inside the fixture as well. Drivers are similar to ballasts,but exclusive for LED and with aadditional lightingcontrol

Some retrofits stick to a similar topology as the lamps replaced, like the example above where 8-foot fluorescent tubes are replaced with 4-foot LED tubes. However, some lighting providers change the configuration completely; for example, there are rectangular retrofit kits with light engines that do not resemble tubes at all, intended for existing 2×4 or 2×2 fixtures. Retrofits kits are also commonly used with decorative fixtures, to preserve the fixture body while improving lighting performance.

Basically, a retrofit is intermediate between a lamp replacement and a fixture replacement. The fixture is partially modified and the light source is changed completely, but the fixture body is preserved. Many internal components are replaced or rewired, but not necessarily all of them.

Fixture Replacements

With this type of lighting upgrade the existing fixtures are removed completely, including the housing. A complete fixture replacement is the most expensive lighting upgrade, but it also tends to deliver the highest energy savings: integral LED fixtures are designed with an internal geometry that maximizes lighting delivered to working planes. On the other hand, with relamps and retrofits you are subject to the optical performance of the existing fixture.

Rebate programs tend to offer higher incentives for full fixture replacements, compared with relamps and retrofits.

Conclusion

There are many options available if you plan to upgrade the lighting system in your building. In general, LED lighting is a cost-effective investment due to its superior energy efficiency and long service life, but LED products are characterized by diversity and too many options can cause confusion. Get a professional lighting assessment to find the most promising lighting upgrades.

The incentive per fixture may not seem much, but consider that a large building can have thousands of fixtures. You can start saving electricity and money earlier by acting fast and pursuing the highest value engineering for your desired outcome.

Common searches related to Value Engineering Winthrop Harbor, Illinois.

Value Engineering Examples In Construction

(MEP) Engineering Service in Winthrop Harbor

MEP Firm Winthrop Harbor! When you re searching for a competent MEP Chicago in Firm? Your best bet is to call is NY-Engineers.Com. Not only for MEP Firms in Chicago but also Mechanical Engineering and Sprinkler System Engineering near Winthrop Harbor. Call 312 767.6877 The great majority of construction companies throughout Hicksville, New York have come to depend on NY Engineers for a wide range of engineering services ranging from Electrical [...]

2018-09-09T02:59:11+00:00