Electrical Engineer Service Sun Prairie Wisconsin2019-03-05T06:40:18+00:00

Electrical Engineer Services in  Sun Prairie Wisconsin

Value Engineers Near Me

From Idaho to North Carolina developers have come to rely on New York Engineers when they need expert MEP Engineering Services in Sun Prairie Wisconsin. With that said, it is important to note that NY-Engineers.Com is more than that. We’re eight national engineering firm offering design but also consulting services. Even though our focus is in mechanical, electrical and plumbing (MEP) installations. New York Engineers offers a range of services to property developers and business owners. These services range from designing mep systems of adequate capacity according to building conditions, meeting the specific needs of each client to energy efficiency, specifying building systems that accomplish their intended function while saving electricity and fuel and more. Lately we have seen a huge for Electrical Engineering Services in Sun Prairie Wisconsin. This is another area where NY Engineers excels at!

Why you should consider NY-Engineers.Com for all your electrical engineer projects? If you’re in the process of planning for a major project, and that project requires electrical work, you may want to think of hiring an electrical engineer. You may even want to examine working with a pro for those who have electrical things that you’re seeking to solve. Why would you be hiring a professional? Following are a few of the perks you’ll have the capacity to enjoy if you deal with a specialist.

They’ll Allow You To Avoid Huge Mistakes – It’s not rare for anyone to make mistakes in relation to electrical work. Sadly, these kinds of errors might have overwhelming effects. You’ll want to work with someone who is aware about exactly what might go wrong. When you hire someone with the right expertise, they’ll be capable of ensuring that the task that you’re planning, gets completed without having a hitch.

They May Provide Lots Of Useful Advice – You will possibly not have much knowledge about electrical work. Thankfully, these professionals have a great deal of knowledge that you don’t. They’ll be able to give feedback and advice that can be truly necessary to you. Should you end up working with someone this way, you’ll end up taking lots of their comments on board.

They Can Help You To Finish A Project On Schedule – Plenty of projects such as this wind up getting delayed, and these types of delays can be quite costly. Should this be an issue that you’d prefer to prevent, an experienced will be able to make sure that you won’t go off your schedule.

There are plenty of reasons to take into account hiring an electrical engineer. If you’re organising a major project, and you believe you can use the services of an engineer, you can start conversing with some professionals which are in your general area. At NY Engineers, we have helped a lot of general contractors who were searching for Electrical Engineering Services in Sun Prairie Wisconsin with not only that but also services such as Value Engineering Services. If you like additional info on the services NY-Engineers.Com please, visit on our blog.

Recent Post Related to Electrical Engineer Services in Sun Prairie Wisconsin

How Mechanical Engineers Compare Operating Expenses of Different Water Heater Models

HVAC Mechanical Engineer

One of the key characteristics to consider when deciding between several water heater options is the operating cost; the heater with the lowest price tag is not necessarily the least expensive to own in the long term. Operating cost is determined in great part by equipment efficiency, but there are other equally important factors that mechanical engineers want you to consider:

  • Energy sources have different unit prices. In the case of heating systems, the input is generally electricity, natural gas, propane or fuel oil. There are also zero-cost energy sources, such as geothermal energy and sunlight.
  • Operating schedules may vary depending on the type of heater. Rated power is not the only factor that determines total energy consumption; the operating schedule must also be considered. For example, tankless water heaters have a high rated power but operate in short bursts, saving energy compared to a storage heater that draws less power but operates continuously, assuming the energy source is the same.

This article will provide a guide for calculating and comparing operating expenses with different types of heaters. After these values are calculated, they can be weighed against the upfront cost of each heating system to find the most cost-effective option.

As with any investment in equipment, considering the total ownership cost is very important when purchasing a heater: to calculate the real heating cost per BTU or kWh produced, it is necessary to factor in the initial investment and any maintenance or reparation expenses. For instance, saying that solar heating is free would not be completely true; although the energy input is free, there are equipment and installation costs, and in multistory buildings a small pump may be required for water to reach the rooftop.

Energy Factor: How Mechanical Engineers Calculate Heating Expenses

The energy factor (EF) is the ratio of heating output to energy input offered by a heating system. It considers how effectively the heater converts its energy input into an increase in water temperature, but also accounts for other aspects of heater operation:

  • Standby losses – These losses are found in storage heaters, and they represent the heat loss associated with keeping the water in the tank at the desired temperature. Although proper insulation mitigates standby losses, they are impossible to eliminate completely.
  • Cycling losses – These losses occur as water circulates through the heater’s internal piping, and through the storage tank if present.

Heaters running on fossil fuels have energy factors well below unity, electric tankless heaters operate close an EF of 1, and heat pumps have EF values higher than unity because their inverse refrigeration cycle allows them to draw heat from the surrounding environment.

Comparing Water Heaters: An Example

Assume you are presented with four water heaters for a household that consumes 80 million BTU per year, and want to calculate the operating costs associated with each alternative:

  • A gas-fired storage heater with an EF of 0.55
  • A tankless electric heater with an EF of 0.97
  • A tankless gas heater with an EF of 0.80
  • An electric air-source heat pump with an EF of 2.5

Since the example is for one city, assume the cost of natural gas is $1.20 per 100,000 BTU, and the electricity rate is $0.18 per kilowatt-hour.

  • For the gas heaters, the calculation procedure can be carried out directly because the heating output and energy input are both in BTU.
  • The tankless electric heater and heat pump run with electricity, so the heating output must be converted to kWh before proceeding.
  • Heating Output (kWh)=80,000,000 BTU x 1kWh/3412.14 BTU= 23,446 kWh

Other than this, the calculation procedure is the same for all four heaters. The yearly heating output is divided by the energy factor (EF) to calculate yearly energy consumption, and this value is then multiplied by the unit price of energy, per kWh or BTU. This formula is applied by mechanical engineers to all four water heaters, to determine which is the least expensive to operate.

Gas-fired storage heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.55×1.20 USD/100,000 BTU=1745 USD

Tankless electric heater operating cost:
Operating Cost (USD/yr)=23,446 kWh/.97X.18 USD/kWh=4351 USD

Tankless gas heater operating cost:
Operating Cost (USD/yr)=80,000,000 BTU/.8 X 1.20 USD/100,000 BTU=1200 USD

Electric air-source heat pump operating cost:
Operating Cost (USD/yr)=23,446 kWh/2.5 X .18 USD/kWh=1688 USD

Operating Cost Comparison

In this case, the tankless gas heater has the lowest operating cost. The heat pump and gas-fired storage heater follow, although the heat pump wins by a slight margin. The tankless electric heater is the most expensive to operate by far.

Total Cost of Owning and Operating Heaters

For a full evaluation, the upfront cost and service life must be considered as well. For this example, assume the following cost and rated life values:

HeaterInstalled CostService life
Heat Pump$180015
Tankless electric heater$150020
Tankless gas heater$200020
Gas-fired storage heater$120010

For simplicity, the analysis will be limited to upfront and operation costs. The yearly ownership cost of each heater option would be:

  • Heat Pump Cost = $1688/year + ($1800/15 years) = $1808/year
  • Tankless Electric Heater = $4351/year + ($1500/20 years) = $4426/year
  • Tankless Gas Heater = $1200/year + ($2000/20 years) = $1300/year
  • Gas-Fired Storage Heater = $1745/year + ($1200/10 years) = $1865/year

The tankless gas heater is still the winner in this case, despite its higher upfront cost. The heat pump and gas-fired storage heater have a similar cost of ownership, and the tankless electric heater is very expensive to operate due to the high electricity rates of some cities. However, keep in mind this is just an example, and different results may be obtained for different locations.

Concluding Remarks

To determine which type of heater is the best match for your property, getting a professional assessment from one or more mechanical engineers is highly recommended. For example, if you don’t have a chimney, the installation cost of any gas heater will increase significantly. Remember that electricity and gas prices also vary by location, and what is true in one location may not always apply in another city or state.

Value Engineering Process Steps