Fire Protection Engineering Gladstone Park Chicago2018-11-22T08:40:46+00:00

Fire Sprinkler Design Engineering in Gladstone Park Chicago

Contact Us!

When you’re searching for a competent Commercial & Residential Fire Sprinkler Systems Design near Gladstone Park Chicago Illinois? The one to go to is NY Engineers. Not only for Fire Sprinkler Systems Design Services but also Electrical Engineering and HVAC Chicago. Contact us at 312 767.6877

Contact Us!
HVAC Engineering Salary

Nowadays if you solicit any contracting company or builder form Kennedy Park Chicago to Roseland Chicago, about a professional Value Engineering in Chicago, the most popular answer is contact NY-Engineers.Com. What is so well known is that NY Engineers is more than likely your best option for anyone looking for a fire sprinkler design engineer in Gladstone Park Chicago. At New York Engineers our crew has many years of experience designing fire protection and sprinkler systems from New City to Hauppauge, New York. Now, from our Chicago office we are helping contracting company and developers in Gladstone Park Chicago design the fire protection and sprinkler systems they seek.

The possibility of a building burnt down because of fire is really a sight that no one wants to discover. That is the reason why fire protection engineers are hired before a building or apartment is built. Should you be wondering who needs fire protection engineer, then a first name that you need to know is definitely the architect of the building. Much like an architect is essential to ensure the design of the property is perfect and protected from all ends; a fire protection engineer helps to ensure that your building is protected from possible likelihood of fire.

Seeing fast response from your firefighting pros is okay but won’t it be great if a fire never happened? You must think about “what if” instead of going through the dreadful experience of your building catching on fire. Fire protection engineers check out the design of the construction first then ma the escape paths to be taken in a fire. In addition to this, they are responsible for adding several fire protection components in and out of the building. Water hosepipes connected to the main water supply, and checking the fitness of the fire extinguishers are among the duties the fire protection engineer performs if they are hired.

Distinction Between Gladstone Park Chicago Fire Sprinkler Tech versus Protection Engineers

The Society of Fire Protection Engineers has a explicit meaning of Fire Technology versus Protection Engineers. The two positions call for a solid education in fire technology and practive as a firefighter generally.

The engineers use principles to utilize systems and methods setups in various buildings which help protect folks and things from harm during fires. Engineers examine possibilities of where biggest fire risks lie and where to install protection such as sprinklers. They ensure that the usage of dwellings and any materials inside them are designed to keep hazards to a minimum.

Engineers will even manage the installation and repair of alarm systems, smoke detectors, and can do investigations of fires after it happens. It will help them stop such incidences from happening later on.

This sort of rank calls for scientific principles to help increase the safety of individuals in commercial and residential buildings. A fire technician functions is to carry out the testing and repair of the systems that were arranged and outlined by the engineers.

These individuals also needs to hold the correct education and firefighting knowledge to function within the field. They could also work to aid put in fire alarms and sprinkler systems but they usually do not plan the layout of these systems such as the engineers do. There is a great possibility you would like additional information about fire protection engineering services in Gladstone Park Chicago by NY Engineers you should visit at our blog.

New Energy Modeling Related Article

Radiant Heating Systems: Types and Applications for HVAC Engineering

Fire Protection Engineering Salary

Radiant heating systems deliver heat through the floor, walls or ceiling of a building. As implied by their name, these HVAC engineering systems rely mostly on radiant heat transfer – direct delivery of heat from a warm surface to occupants and objects via radiation.

Radiant floor heating systems are characterized by their silent operation and energy efficiency. Since the heat source is located below, temperature rise is uniform as warm air rises and displaces cooler air. This also allows heating to occur without a forced air system: the installation does not disturb dust and allergens, while improving occupant comfort by eliminating air drafts.

Radiant floor heating also offers a lower running cost than furnace-based heating systems – you can expect savings from 25% to 50% according to the US Department of Energy. Space heating is the highest energy expense in certain buildings, so projects that improve its efficiency tend to have an excellent return on investment.

Radiant floor heating is a great option for houses with children and for schools. Conventional air duct systems deliver heat from above, and the lower portion of the room is not always heated effectively because warm air tends to rise. Due to their shorter height, kids are more susceptible to uneven heating from forced air systems, and this can potentially lead to health issues. On the other hand, radiant floor heating delivers heat from the bottom up and improves comfort for kids.

Radiant heat systems are highly recommended HVAC engineering solutions in houses with big rooms and high ceilings. Conventional forced air systems are impractical in these cases, since they only tend to heat the upper portion of the room, wasting energy.

Types of Radiant Floor Heating Systems, Explained by an HVAC Engineering Pro

Radiant floor heating systems can be classified based on the medium used to deliver heat: air-heated, electric and hydronic.

1) Air-heated radiant floor system: In this system configuration, hot air is blown through the ducts beneath the floor, which causes a warming effect. The main limitation is that air cannot hold much heat, so these systems are not suited for residential buildings.

2) Electric radiant floor system: This configuration uses heating cables or conductive plastic mats that are built into the floor. The main limitation of electric radiant floor systems is their dependence on resistance heating, which can result in a very high running cost if the kilowatt-hour price is high.

Electric radiant floor heating works best for property owners that have access to time-of-use electricity rates and floors with a large thermal mass (e.g. concrete). The system can be configured to operate when electricity prices are low, which is normally during off-peak hours, storing as much heat as possible in the floor itself.

The system is also set to shut down during peak demand hours with expensive electricity, and the floor can deliver from 8 to 10 hours of heating without power consumption if its thermal mass is high enough. If the floor has a reduced thermal mass, the electric RFH system must operate more frequently, and running costs can increase dramatically during peak demand hours.

3) Hydronic (hot water) radiant floor system: This is the most popular and cost-effective among the three types of radiant floor systems, and is suitable for applications where occupants can use a thermostat to control the heat output room-by-room. Hot water from a boiler is pumped through hydronic pipes that are evenly distributed under the floor, and distribution among different piping runs is controlled through a manifold. Hydronic RFH systems have minimal maintenance requirements and can be installed between the joists under existing floors, making them ideal for renovations.

Radiant Floor Heating Installation Types

Radiant floor heating systems can be classified into wet and dry installations. Note that this classification is independent from the heat transfer medium: the words wet and dry to not make reference to hydronic piping or electrical resistance.

1) Wet installation: This is the oldest type of radiant floor installation. Electrical cables, mats or hydronic tubing are embedded in a thick concrete slab or thin concrete subfloor, which means this installation type is more expensive than a dry one. The RFH system takes more time to heat the floor and the air in the room, but the large thermal mass of concrete preserves the heating effect for several hours after the system is turned off.

2) Dry installation: A dry installation is easier to set up, less expensive and generally the most convenient type. The heating cables, mats or tubing are installed in a pocket of air under the floor, not embedded in concrete, resulting in a faster heating than a wet installation. This system configuration needs to operate at a high temperature however, since it is not embedded in the floor material.

How Flooring Materials Influence Performance

The performance of radiant floor heating is strongly influenced by the flooring material: thermally-conductive materials enhance performance, while insulating materials are detrimental. However, this does not imply you should avoid insulation – just make sure it is not installed where it can block heat transfer between the radiant floor system and indoor spaces.

Due to its high thermal conductivity and storage capacity, ceramic tile is considered the most effective covering material for radiant floor heating. Other materials such as vinyl and linoleum sheet provide too much insulation, hence reducing system efficiency. Wood floors conduct the heat quite well, but laminated wood flooring is prefered over solid wood, which can easily dry and contract.

How Do Radiant Panels Work?

Unlike radiant floor systems, these panels are generally installed in walls and ceilings, using electricity or hot water to heat aluminum sheets. Electrically-heated systems offer the convenience of preventing water leakage issues, but also have a much higher running cost due to dependence on electricity. Radiant panel systems can have a superficial construction or can be embedded in the wall, but keep in mind that future alterations are impractical in the second case.

What Are the Key Components of Radiant Floor Heating Systems?

1) PEX tubing/heating cables/heating mats: This part of the system is responsible for delivering heat. PEX tubing distributes hot water from a boiler, while the other two options produce heat directly through electrical resistance.

2) Manifold: Distributes hot water among various hydronic piping circuits.

3) Actuator valves and fittings: Valves allow water flow control, while fittings provide a connection between piping runs and other system components.

4) Control pack: Operates the system based on user settings.

5) Heating control (thermostat): Lets the user establish the required temperature.

Benefits of Radiant Floor Heating

1) RFH is suitable for new constructions with large rooms and high ceilings, improving both performance and comfort.

2) Easily-adjustable comfort levels and heating controls.

3) Energy savings and reduced bills.

4) More free space is available, by eliminating forced air systems and their associated ducts.

5) Air moves by natural convection, minimizing the spread of dust and allergens.

6) Silent operation

7) Universal control

If you are ever uncertain as to which method of radiant floor heating is most suitable for your space, consult the expertise of an HVAC engineering professional.

Popular searches related to Sprinkler Design Engineer in Gladstone Park Chicago