Fire Protection Engineering Munster2018-11-08T08:02:39+00:00

Fire Sprinkler Design Engineering in Munster

Contact Us!

When you’re searching for a dependable Commercial & Residential Fire Sprinkler Systems Design near Munster Illinois? The one to go to is New York Engineers. Not only for Fire Sprinkler Systems Design Services but also Construction Engineering and HVAC Chicago. Contact us at (+1) (312) 767-6877

Contact Us!
Architecture Engineering Salary

Nowadays when you ask any general contractor or building owner form Ford City to Lincoln Square Chicago, about a affordable Construction Engineering in Chicago, the most popular answer is call NY Engineers. What is so well known is that NY-Engineers.Com is more than likely your best bet for anyone looking for a fire sprinkler system engineering in Munster. At NY-Engineers.Com our crew has many years of experience designing fire protection and sprinkler systems from Brentwood to Deer Park, NY. Now, from our Chicago office we are helping contracting company and building owners in Munster design the fire protection and sprinkler systems they seek.

The danger of a building burnt down because of fire can be a sight that nobody wants to discover. That is the reason why fire protection engineers are hired before a building or apartment is built. In case you are wondering who needs fire protection engineer, then your first name you should know will be the architect in the building. Much like an architect is vital to make sure that the design of the building is perfect and resistant to all ends; a fire protection engineer ensures that the property is safe from possible probability of fire.

Seeing prompt reaction in the firefighting experts is acceptable but wouldn’t it be fantastic if a fire never took place? You must think of “what if” rather than experiencing the dreadful experience of the building catching on fire. Fire protection engineers check out the style of the construction first and after that ma the escape routes to be used during a fire. In addition to this, they are responsible for adding many fire protection things inside and out of the structure. Water hoses and pipes attached to the main water tank, and checking the condition of the fire extinguishers are the duties the fire protection engineer carries out while they are hired.

Difference Between Munster Fire Sprinkler Tech versus Protection Engineers

The Society of Fire Protection Engineers includes a explicit concept of Fire Technology versus Protection Engineers. Both positions require a solid education in fire technology and practive working as a firefighter in most cases.

The engineers use principles to apply systems and methods setups in various buildings that can help protect people and things from harm during fires. Engineers analyze where the biggest fire hazards lie and where to install protection for example sprinklers. They make certain that the use of dwellings as well as any materials in them are made to keep threats to a minimum.

Engineers will also manage the fitting and repair of smoke detectors, alarms systems, and definately will do investigations of fires after one occurs. This can help them prevent such things from occurring in the foreseeable future.

This particular title uses scientific principles to aid improve the safety of individuals in commercial buildings. A fire technician activly works to conduct the testing and upkeep of the systems which were arranged and outlined with the engineers.

These people must also possess the best schooling and firefighting knowledge to work within the field. They might work to help you add sprinklers and fire alarm systems nonetheless they tend not to arrange the design of these systems just like the engineers do. There is only so much you can save this page if you would like more info about fire sprinkler system engineer services in Munster by New York Engineers we invite you to stop by at our blog.

Latest Energy Modeling Related Blog Article

Heat Source Comparison: Heating Oil and Natural Gas According to MEP Engineers

Fire Protection Engineering Schools

Heating oil and natural gas are both fossil fuels, but they have very different properties. At room temperature, one is a viscous liquid while the other is a gas. For a given heating output, there is also a difference in the amount of natural gas or heating oil that must be burned, as well as the greenhouse gas emissions produced.

Heating oil is normally measured in gallons, while natural gas is measured in cubic feet. Therefore, it is easier to compare their performance based on heating output – the US Environmental Protection Agency compares their emissions per million BTU (mmBTU) of heat. This is how MEP engineers and other engineering professionals stack these two heating methods up against each other.

Comparing the Emissions of #2 Heating Oil and Natural Gas

According to the US EPA, #2 heating oil releases 73.96 kg of CO2 per mmBtu of heat, while natural gas produces 53.06 kg of CO2 per mmBtu. In other words, #2 heating oil produces almost 40% more carbon dioxide per unit of heat, and this is even higher for the types that have been phased out by legislation, #4 and #6. Compared with heating oil, natural gas also produces reduced amounts of sulfur oxides, nitrogen oxides and soot.

Another key greenhouse gas is methane (CH4), and replacing #2 heating oil with natural gas also reduces its emissions. The US EPA has determined that natural gas usage releases 1 g of CH4 per mmBtu, while #2 fuel oil releases 3 g of CH4 per mmBtu. Keep in mind that the global warming potential of methane is 25 times higher than that of carbon dioxide.

Nitrous oxide (N2O) is even worse than methane, having a global warming potential 298 times higher than carbon dioxide. While #2 heating oil emits 0.60 g of N2O per mmBtu, natural gas only emits 0.10 g of N2O per mmBtu.

Even greater emissions reductions can be achieved when an old and inefficient oil boiler is replaced with a hhigh-efficiencynatural gas boiler, according to expert MEP engineers. Assume the oil boiler has an Annual Fuel Utilization Efficiency (AFUE) of 60% while the new gas boiler offers 95%. To produce one million Btu of heating output, the required input would be the following:

  • Oil boiler input = 1 mmBtu / 0.60 = 1.67 mmBtu
  • New gas boiler input = 1 mmBtu / 0.95 = 1.05 mmBtu

Considering the emission intensity values above, this oil boiler releases around 123 kg of CO2 while the gas boiler releases 56 kg of CO2. The emissions reduction value of 28% applies when both boilers have the same efficiency, but in this case CO2 emissions are actually reduced by 54% because the new boiler is more efficient while using a less polluting fuel. Although this is a broad estimate, it provides an example of how superior boiler efficiency and conversion to natural gas work together to reduce emissions. The same effect applies for other greenhouse gases such as methane and nitrous oxide.

However, it is important to note that natural gas is still a fossil fuel. Having the word “natural” in its name may cause the false impression that it is a renewable energy source, but this is not the case. Natural gas is simply less polluting than other fossil fuels but has a negative environmental impact nevertheless.

MEP Engineers Explain Con Edison Incentives for Natural Gas Conversion

Property owners in a major city who are considering a switch from heating oil to natural gas may be eligible for cash incentives from your utility supplier. This reduces the cost of a fuel conversion project while keeping all the benefits, improving its financial viability. There is also a reduction in heating expenses, so it is possible to analyze the project in terms of cost and benefit.

Final Recommendations

There are many reasons to convert building heating systems from heating oil to natural gas. First of all, the US Department of Energy has determined that natural gas has a lower heating cost than fuel oil. Natural gas also has a much lower emissions intensity than #2 heating oil, and this benefit is enhanced when an aging oil boiler is replaced with a high-efficiency natural gas boiler.

Professional guidance is strongly recommended, like with any engineering project, especially because natural gas poses a risk of fire. In addition, the combustion products must be properly exhausted, and can threaten human life if allowed to accumulate in closed spaces. Engineering services also ensure code compliance. Upgrading from oil to natural gas is not as simple as removing one boiler or furnace and installing a new one – for example, the gas service entrance and chimney may need an upgrade.

Recruit the help of MEP engineers and other professionals in the field before moving forward with any upgrade of this caliber.

Top searches related to Protection Engineer in Munster