Fire Protection Engineering Summit Chicago2018-11-01T19:29:28+00:00

Fire Protection Engineer in Summit Chicago

Contact Us

If you’re looking for a dependable Commercial & Residential Fire Sprinkler Systems Design near Summit Chicago Illinois? Your best bet is to contact is NY Engineers. Not only for Fire Sprinkler Systems Design Services but also Construction Engineering and HVAC Firms near Chicago. Call us at (+1) 312 767.6877

Contact Us
What Do Architectural Engineers Do

Nowadays when you solicit any general contractor or builder anywhere from Kenwood to South Shore, about a dependable Mechanical Engineering in Chicago, the most popular answer is reach out to New York Engineers. What’s very well known is that NY Engineers is probably your best bet for anyone looking for a fire sprinkler system engineering in Summit Chicago. At New York Engineers our staff has many years of experience designing fire protection and sprinkler systems from Binghamton to North Bay Shore, NY. Now, from our Chicago office we are helping general contractor and builders in Summit Chicago design the fire protection and sprinkler systems they need.

The possibility of a building burnt down because of fire is a sight that nobody wants to experience. That is the reason why fire protection engineers are hired before a building or apartment is constructed. When you are wondering who needs fire protection engineer, then your first name that you need to know will be the architect in the building. Just like an architect is important to make certain that the appearance of your building is perfect and protected from all ends; a fire protection engineer ensures that the construction is safe from possible chances of fire.

Getting direct reaction from your firefighting professionals is okay but won’t it be better if a fire never happened? You should imagine “what if” as opposed to experiencing the horrifying scene of the building being on fire. Fire protection engineers browse through the model of the building first and then plan the escape routes to be taken in a fire. Additionally, they are responsible for putting in many fire protection things inside and out of the structure. Water hosepipes linked to the main water tank, and checking the usefulness of the fire extinguishers are a few of the duties that the fire protection engineer performs while they are hired.

Distinction Between Summit Chicago Fire Sprinkler Tech versus Protection Engineers

The Fire Protection Engineers Society has a specific concept of Fire Protection Engineers vs Tech. The two positions demand a solid education in fire technology and experience working as a firefighter in most cases.

The engineers use principles to make use of systems and methods setups in a variety of buildings that help protect folks and things from harm during fires. Engineers analyze the location where the biggest fire risks lie and the best places to implement protection such as sprinklers. They ensure that the usage of structures as well as any materials within them are made to keep threats as low as possible.

Engineers will likely oversee the installation and maintenance of alarm systems, smoke detectors, and may carry out investigations of fires after it happens. This helps them stop such things from occurring in the foreseeable future.

This sort of title needs scientific principles to help improve the safety of individuals in commercial buildings. A fire technician operates to conduct the testing and upkeep of the systems that were arranged and organized from the engineers.

These folks would also possess the best education and firefighting knowledge to work within the field. They might also work to help add sprinklers and fire alarm systems however they usually do not arrange the layout of these systems just like the engineers do. There is only so much you can save this page if you would like more information about fire protection engineering services in Summit Chicago by NY Engineers we invite you to take a look at our Chicago Sprinkler Engineering blog.

Plumbing Engineering Related Article

Heating and Cooling Upgrades: Where to Start? Architectural Engineers Have This Advice

Construction Engineering Pdf

Space heating represents the highest energy use in many buildings. In addition, domestic hot water and space cooling systems use less energy than space heating, but they are also among the top five building systems that use the most energy. According to architectural engineers, a building can reduce its energy consumption dramatically by replacing its existing heating and cooling systems with modern and high-efficiency equipment.

However, before proceeding with a large-scale building upgrade it is necessary to define a starting point. Building upgrades are investments after all, where the property owner spends capital with the goal of achieving a permanent reduction in building ownership cost. In other words, building system upgrades only make sense from the financial standpoint if the long-term benefit outweighs the associated upfront expenses.

Is There an Upcoming Major Renovation?

Heating and cooling upgrades provide long-term benefits but can be disrupting for building operation. If a major renovation is planned in the short term, it represents an excellent chance to also improve HVAC performance.

A major renovation also provides an excellent chance to improve the building envelope, architectural engineers advise. Poor insulation and air leaks can be detected and fixed, reducing the required heating and cooling capacity after the renovation. This way, the new heating and cooling systems can be specified not only with a higher efficiency, but also with a lower capacity.

  • For example, if you replace a 100-ton air-cooled chiller consuming 1.2 kW/ton with a more efficient water-cooled unit that only uses 0.6 kW/ton, you achieve 50% energy savings.
  • However, if the new unit has a required capacity of only 80 tons thanks to building envelope improvements, energy savings are increased to 60%.

A building envelope improvement can be complemented with a lighting system upgrade. Solid-state LED lighting emits significantly less heat than incandescent, halogen or old fluorescent lighting. All this heat is subtracted from space cooling loads, providing additional energy savings beyond those achieved directly with the lighting upgrade.

Consider that a 60-watt incandescent bulb can generally be replaced with a 10-watt LED bulb, and a 4-lamp T12 fluorescent fixture (4x 34W) can generally be replaced with an integral LED fixture consuming 40-45W. The lighting heat reduction is not significant for a single fixture, but can save several tons of cooling capacity in a building with hundreds of inefficient fixtures.

Building Upgrades: Cost and Benefit

When upgrading a building it can be tempting to prioritize space heating systems, since they consume the most energy. However, it is also important to consider the energy source used by each appliance.

For a given amount of energy delivered, electricity is far more expensive than gas in major cities. Natural gas from Con Edison has a price of around 1.05 USD per therm for residential users, which translates to approximately 3.6 cents per kWh of heat, before considering appliance efficiency. On the other hand, electricity prices typically exceed 20 cents per kWh. Even if most combustion appliances are less efficient than electric appliances, the price of electricity is too high compared with that of gas. This effect is evident in electric resistance heaters, which are around four times more expensive to operate than gas heaters.

Property owners can achieve the best results by getting a professional energy audit before deciding which building upgrades to carry out. With an energy audit, property owners can get a detailed breakdown of energy efficiency measures, along with the expected cost of each. More importantly, an energy audit helps determine the return on investment for each energy efficiency measure – how many dollars will it return over its service life for each dollar spent upfront? Given the price gap between electricity and gas, upgrades that target electric system generally offer a shorter payback period and a higher ROI.

Before proceeding with any building upgrade, checking the Con Edison incentive program is highly advised. Many energy efficiency measures are eligible for attractive cash rebates, which further improves their financial performance. Consider that some rebate programs only apply during certain times of the year or have limited funding, so building upgrades should be planned accordingly.

Importance of Building Type to Architectural Engineers

Not all buildings consume energy the same way. For example, mechanical ventilation typically represents around 13% of energy use in office buildings, but only 1% in multifamily residential settings. This is a consequence of the requirements established by construction codes for each property type – natural ventilation design is mandatory in residential constructions, but designers can choose between natural and mechanical ventilation for office buildings. Domestic hot water systems experience the opposite effect as ventilation systems, representing only 2% of energy use in office buildings but 19% in multi-family residential buildings.

Differences like this are present for many building systems. For example, office occupancy is normally higher than residential occupancy during the day, which extends lighting and space cooling schedules for office buildings, and the corresponding energy expense. However, this does not mean lighting and cooling upgrades should be discarded in the residential sector: these systems represent a reduced percentage of energy consumption but are typically older than those found in office buildings, which can result in an attractive financial return.

Final Recommendations

When deciding which cooling and heating upgrades to prioritize, it is very important to select an adequate time frame for the project, and getting an energy audit to determine the cost and benefit of each measure. Ideally, deep retrofits should be scheduled along with major renovations to minimize disruption and cost. It is also important to find synergy between upgrades, for example when both lighting and space cooling are upgraded. Of course, the financial return is also a very important consideration: as a property owner you will want to prioritize measures that maximize the return on each dollar invested.

In general, energy efficiency measures that target electric systems will have a better financial performance than those targeting gas-fired systems. Nevertheless, there are exceptions to this; an energy audit of the building is the best way to tell, agree experienced architectural engineers.

Common searches related to Sprinkler System Engineering in Summit Chicago